Tripp Lite INT 300 - Manual

Tripp Lite INT 300 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1

2

3

4

Page: / 4 Go to

Next Page

PDF Text Table of Contents

Table of Contents:

• Page 2 – Apéndice al Manual del Propietario del; OmniPro; Sistemas UPS de interacción con la red; programa de alarma PowerAlert, ni los cables; ADVERTENCIAS sobre el cambio de la batería:; Sólo personal cualificado puede; Especificaciones Nuevos
• Page 3 – Unités d’alimentation non interruptible; ni logiciel PowerAlert ; AVERTISSEMENTS concernant le remplacement des batteries:; Les batteries ne; Nouvelles Caractéristiques
• Page 4 – Neue Technische Merkmale; umfasst keine PowerAlert Software oder Kabel.; Warnung zum Batteriewechsel:; Das Auswechseln der Batterie sollte durch fachlich

Loading the manual

Owner’s Manual Addendum to #93-1208

OmniPro

™

INT 300

Line Interactive UPS System

220/240V, 50/60Hz

ESPAÑOL: p. 2

FRANÇAIS : p. 3

DEUTSCH: p. 4

1111 W. 35th Street

Chicago, IL 60609 USA

Customer Support: (773) 869-1234

www.tripplite.com

Copyright © 2000

. All rights reserved. OmniSmart

™

and OmniPro

™

are trademarks of

.

OmniPro INT 300

Output Capacity (VA/Watts):

300/175

Input Frequency

50/60 Hz

Battery Runtime (Half Load/
Full Load) Minutes:

17/5

Typical Runtime (Desktop
PC/15 in. monitor) Minutes:

15

Battery Recharge Time:

2-4 hours

Dimensions (H x W x D):

21 x 10.8 x 14.6 cm

Weight

5 kg

Approvals:

UL, CE

New Specifications

The new OmniPro INT 300 shares all of the functions of the OmniSmart INT 280 in
the accompanying manual, with the following exceptions:

• The OmniPro INT 300 does not feature a DB9 serial port and does not include

PowerAlert Software or cabling.

• The OmniPro INT 300 has two diagnostic LEDs that indicate on-line and on-

battery status.

• The OmniPro INT 300 has no Alarm Mute/Test Switch.

• The OmniPro INT 300 features two IEC-320 AC output receptacles.

• The OmniPro INT 300 features a battery replacement door on the rear panel.

Under normal conditions, the original battery in the UPS system will last
between 3 and 6 years. Qualified service personnel should read and observe
all precautions listed below before attempting replacement.

Battery Replacement WARNINGS:

Battery replacement should be performed by

qualified service personnel only. Disconnect UPS from wall receptacle before performing
battery replacement. Keep all other people away from the area when performing battery
replacement. The batteries contain lead and acid. Do not dispose of the batteries in a
fire. Do not open the batteries. Do not short or bridge the battery terminals with any
object. Do not touch the loose battery terminal wires together or to any metal part of the
UPS cabinet. Except for the replaceable battery, the UPS contains no user replaceable
parts. A battery can present a risk of electrical shock or burn from high short-circuit
current. Observe the following precautions while replacing batteries: 1) Remove
watches, rings and all other metal objects; 2) Use tools with insulated handles. After
removing UPS batteries, proper disposal is required. The batteries are recyclable. Refer
to your local codes for complete recycling information. When replacing batteries, use the
same number and type batteries originally installed in your UPS. Contact
customer support at (773) 869-1234 for further information on battery replacement.

200001206 OmniPro 300 INT Addendum.p65

2/23/00, 9:24 AM

1

Other Tripp Lite Models

• Tripp Lite N002-007-GY
  • Manual
• Tripp Lite N352-09M
  • Manual
• Tripp Lite AGSM700PSR3HG
  • Manual
• Tripp Lite OMNIVSINT1000
  • Manual
• Tripp Lite SUPDMB12KHW
  • Manual
• Tripp Lite BP480V40C
  • Manual
• Tripp Lite N506-02M
  • Manual
• Tripp Lite N201-020-RD
  • Manual
• Tripp Lite BP48V60RT3U
  • Manual
• Tripp Lite Rackmount Surge Suppressor/Line-Noise Filter
  • Manual