Tripp Lite Extended-Run - Manual
Tripp Lite Extended-Run – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – – Introduction; Features
- Page 3 – – Important Safety Instructions; Installation and Location Warnings; ALL
- Page 4 – Battery Warnings; Keep unauthorized personnel away from batteries.; Note on Labeling
- Page 5 – – Battery Cabinet Installation; Read; Section 2 – Important Safety Instructions; Before Installation; Section 8; -3 Mechanical Check; Note the individual battery model number and refer to
- Page 6 – The charger input must be connected to a separate AC supply; -5 Preliminary Electrical Check; for detailed battery cabinet measurements.)
- Page 7 – -7 Electrical Connection; Warning: Do not connect the battery; -9 Final Electrical Check; Verify that the battery cabinet output voltage is correct.
- Page 8 – – Operation and Charging; -1 Determine Charging Voltages
- Page 9 – – Maintenance; -1 Maintenance Schedule; Quarterly Check; Measure total battery cabinet float charging voltage.; Semiannual Check; Repeat quarterly check.; Annual Check; Repeat semiannual check.; -2 Fuse Replacement
- Page 10 – – Diagrams; Note
- Page 12 – Notes
- Page 15 – – Specifications; -1 Dimensions and Floor Loading
- Page 16 – – Storage and Service; Storage; – Warranty
Copyright © 2008 Tripp Lite. All trademarks are the sole property of their respective owners.
Owner’s Manual
Extended-Run 3-Phase Battery Cabinet
C
US
Not suitable for mobile applications.
1 – Introduction
2 – Important Safety Instructions
3 – Battery Cabinet Installation
3-1 Preparation
3-2 Transportation
3-3 Mechanical Check
3-4 Internal Wiring (Typical)
3-5 Preliminary Electrical Check
3-6 Battery Cabinet Placement
3-7 Electrical Connection
3-8 Battery Charger Electrical Connection (Select Models)
3-9 Final Electrical Check
4 – Operation and Charging
4-1 Determine Charging Voltages
4-2 Initial Charge
4-3 Operational Check
4-4 Acceptance Test (Optional)
5 – Maintenance
5-1 Maintenance Schedule
5-2 Fuse Replacement
6 – Diagrams
6-1 Battery Cabinet Diagram (4 Shelves)
6-2 Battery Cabinet Diagram (3 Shelves)
6-3 Battery and Breaker Diagrams (240 VDC)
6-4 Battery and Breaker Diagrams (+/- 240 VDC)
6-5 Battery Charger (Select Models)
7 – Specifications
7-1 Dimensions and Floor Loading
7-2 Recommended Torque
8 – Storage and Service
9 – Warranty
1111 W. 35th Street, Chicago, IL 60609 USA
+1.773.869.1234 • www.tripplite.com
p. 2
p. 3
p. 5
p. 5
p. 5
p. 5
p. 6
p. 6
p. 6
p. 7
p. 7
p. 7
p. 8
p. 8
p. 8
p. 8
p. 8
p. 9
p. 9
p. 9
p. 10
p. 10
p. 11
p. 12
p. 13
p. 14
p. 15
p. 15
p. 15
p. 16
p. 16
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
[ 2 ] 1 – Introduction Tripp Lite’s Extended-Run 3-Phase Battery Cabinets connect to SmartOnline 3-Phase UPS Systems to provide long-lasting battery backup for data centers, telecommunications, networks, industrial facilities, security, emergency systems and other mission-critical applications that ...
[ 3 ] 2 – Important Safety Instructions Installation and Location Warnings • Install the battery cabinet in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, conductive contaminants, dust and direct sunlight. • Install the battery cabinet in a l...
[ 4 ] 2 – Important Safety Instructions (continued) Battery Warnings • The battery cabinet does not require routine maintenance by the user. There are no user-serviceable parts inside. Only qualified, knowledgeable service personnel familiar with all required precautions should open the access panel...
