Tripp Lite EMS Series - Manual
Tripp Lite EMS Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Important Safety Instructions; SAVE THESE INSTRUCTIONS!; Limited Warranty
- Page 3 – Feature Identification
- Page 4 – Operation
- Page 5 – Configuration; Set Configuration DIP Switches; Group A DIP Switches; Up
- Page 7 – Battery Selection; Example; 5 DC Amps × 5 Hrs. Runtime; Select Auxiliary Battery Type; Match Battery Amp-Hour Capacity to Your Application; • STEP 1) Determine Total Wattage Required; Hours Recharge; Blanket Warmer
- Page 8 – Mounting; Using the measurements from the diagram, install two user-; Vehicular and Non-Vehicular Horizontal Mount; Using the measurements from the diagram, install two user-sup-
- Page 9 – Battery Connection; Vehicular; Your Inverter/Charger’s Nominal DC Input Voltage
- Page 10 – AC Input/Output Connection; ISOBAR
- Page 12 – Troubleshooting
- Page 13 – Specifications; Note on Labeling
Owner’s Manual
Reliable Mobile EMS Power
Congratulations! You’ve purchased the most advanced, feature-rich Inverter/Charger designed as an uninterruptible power source for medical
equipment in ambulance/EMS vehicles. While ambulance/EMS vehicles are on a call, Tripp Lite EMS Inverter/Chargers keep critical equip-
ment constantly in service by providing automatic, uninterrupted DC-to-AC power, inverted from user-supplied batteries. After a call, when util-
ity power is available, EMS Inverter/Chargers automatically pass through AC power to equipment while simultaneously recharging connected bat-
teries. Built-in premium ISOBAR
®
surge suppression technology provides an additional level of equipment protection.
Better for Your Equipment
Built to Meet or Exceed Tough EMS Standards
• UL458
Premium Protection Levels
• Built-In Isobar
®
Surge Protection
• Automatic Overload Protection
Ideal Output for All Loads (including computers)
• Frequency-Controlled Output
• Fast Load Switching
• Balanced Load Sharing**
Better for Your Batteries
Faster Battery Recharge
• High-Amp, 3-Stage Battery Charger (adjustable)
Critical Battery Protection
• Battery Charge Conserver (Load Sense)
• Battery Temperature Sensing
• High-Efficiency DC-to-AC Inversion
Better for You
Quiet, Simple, Maintenance-Free Operation
• Multi-Function Lights & Switches
• Dead Battery Startup
• Ignition Interlock & In/Out Swap Protection
• Moisture-Resistant Construction*
Warranty/Warranty Registration
2
Safety
2
Feature Identification
3
Operation
4
Configuration
5-6
Battery Selection
7
Mounting
8
Battery Connection
9
AC Input/Output Connection
10
Service/Maintenance/Troubleshooting
11-12
PowerVerter
®
EMS Series
DC-to-AC Inverter/Chargers
Input
Output
Invert:
12 VDC
120V, 60 Hz. AC
Charge:
120V, 60 Hz. AC
12 VDC
1111 W. 35th Street, Chicago, IL 60609 USA
Customer Support: (773) 869-1234
www.tripplite.com
* Inverter/Chargers are moisture-resistant, not waterproof. ** Available on all models EXCEPT 1250 models.
Copyright © 2005. PowerVerter
®
is a registered trademark of Tripp Lite. All rights reserved.
Contents
WARRANTY
REGISTRA
TION
Register online toda
y f
or a c
hance
to win a FREE
Tripp Lite pr
oduct—
www
.tripplite
.com/warranty
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2E Important Safety Instructions SAVE THESE INSTRUCTIONS! This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all Tripp LiteInverter/Chargers. Location Warnings • Install your Inverter/Charger (whether for a mobile or sta...
3E Feature Identification Configuration DIP Switches: optimize Inverter/Charger operation depending on your application. See pages 5-6 for setting instructions. Operating Mode Switch: controls Inverter/Charger operation. The “AUTO/REMOTE” setting ensures your equipment receives constant, uninterrupt...
Switch Modes After configuring, mounting and connecting your Inverter/Charger,you are able to operate it by switching between the following oper-ating modes as appropriate to your situation: AUTO/REMOTE: Switch to this mode when you need constant, uninterrupted AC power for connectedequipment. The I...
