Tripp Lite Datacenter INT - Manual
Tripp Lite Datacenter INT – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety
- Page 3 – Quick Installation; Position your Power Module.
- Page 5 – Basic Operation; Switches; Maintenance Bypass Switch (Middle Rear Panel)
- Page 6 – Indicator Lights
- Page 7 – Other UPS Features; Remote Control Interface Port (Lower Rear Panel)
- Page 8 – Storage; Service; Specifications
1
Copyright ©2000 Tripp Lite. All rights reserved. SmartPro
®
is a registered trademark of Tripp Lite.
Quick Installation:
p. 3 - 4
Basic Operation:
p. 5 - 7
Storage & Service:
p. 8
Specifications:
p. 8
Safety:
p. 2
1111 W. 35th Street
Chicago, IL 60609 USA
Customer Support: (773) 869-1234
www.tripplite.com
Owner's Manual
SmartPro
®
Datacenter INT
Intelligent, Line-Interactive
UPS Systems (230V Output)
9905251 230V SmartPro Datacenter OM.p65
8/8/00, 2:02 PM
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 This manual contains important instructions and warnings that should be followedduring the installation, operation and storage of all Tripp Lite UPS Systems. UPS Location Warnings • Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight. • For best performance, keep t...
3 Quick Installation Position your External BatteryPack(s). • If positioning multiple Battery Packs, place them side by side or stack them no more than three high. Position your Power Module. • The Module may be stacked on top of your Battery Packs or placed beside them. Plug your External Battery P...
5 Basic Operation Switches System Switch (Middle Back Panel) This switch activates the UPS's battery charger and intelligentmicroprocessor. ALWAYS leave it in the “ENABLE” (RIGHT)position when your UPS is plugged in. Only set the switch to“DISABLE” (LEFT) to reduce battery drain when you unplug your...
