Tripp Lite B130-101-WP - Manual
Tripp Lite B130-101-WP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety Information
- Page 4 – Local Unit Power LED: This LED illuminates when the external power; supply is connected and the unit is receiving power.; 10 Punchdown Connector: Connect Cat5/5e/6 cable between the 110; Punchdown Connectors on the local and remote units.; Remote Unit Power LED: This LED illuminates when the unit is con-; nected to the local unit and receiving power.; EQ Adjustment: Adjusts equalization length.; Features; Rear
- Page 5 – Installation
- Page 6 – Warranty & Warranty Registration
1
Owner’s Manual
VGA Over Cat5
Extender Wallplate Kit
Model: B130-101-WP
Español
7
Installation
5
Product Features
2-3
Specifications
3
Safety Information
2
Français
13
Warranty & Warranty Registration
6
Optional Accessories
3
Features
4
Package Contents
2
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Note: Follow these instructions to ensure proper operation and prevent damage
to this device and its connected equipment.
Copyright © 2009 Tripp Lite. All rights reserved.
All trademarks are the property of their respective owners.
Warranty
Registration:
register online toda
y f
or a
chance to win a FREE
Tripp Lite
product—www
.tripplite
.com/w
arr
anty
200908075 93-2928.indb 1
9/22/2009 11:27:43 AM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 • To reduce the risk of electric shock, do not expose the product to moisture.• Operate this product using only the included external power supply. Use of other power supplies could impair performance, damage the product, or cause fire. • Use only recommended accessories to avoid fire, shock or ot...
4 1 Source Video-In Port: HD15 Female Connector. 2 Local Unit Power LED: This LED illuminates when the external power supply is connected and the unit is receiving power. 3 Local Unit Power Jack: The 12.6V, 3A external power supply plugs in here. 4 110 Punchdown Connector: Connect Cat5/5e/6 cable be...
5 Note: You should test to make sure the entire installation works properly before pulling cables through ceiling/walls. 1 Connect the Male end of the included VGA splitter cable to the HD15 port on the source computer. 2 Connect one of the Female connectors on the included VGA splitter cable to the...
