Page 2 - Warranty Registration; Table of Contents
2 1. FCC Information 3 2. User Notice 3 3. Package Contents 3 4. Introduction 3 4.1 Overview 3 4.2 Features 4 4.3 System Requirements 4 4.3.1 Optional External Console 4 4.3.2 Computers 4 4.3.3 Remote Console 4 4.3.4 Supported Browsers 4 4.3.5 Custom KVM Cable Kits 4 4.3.6 Operating Systems 5 4.4 Co...
Page 3 - This package consists of:; Remote
3 1. FCC Information 2. User Notice 3. Package Contents This is an FCC Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. This equipment has been tested and found to comply with the limits for a Class...
Page 4 - System Requirements; Browser
4 4.3 System Requirements 4.3.1 Optional External Console 4.3.3 Remote Console 4.3.2 Computers 4.2 Features • 1U Console KVM Switch with built-in IP access – integrated 19 in. LCD monitor, keyboard and touchpad. • Connect either USB or PS/2 computers using P778-Series USB/PS2 Combo KVM Cable Kits – ...
Page 5 - Keyboard
5 4.3.6 Operating Systems Operating System Versions Supported Windows 2000 and higher Linux RedHat 7.1 and higher Linux SuSE 8.0 and higher Linux Mandriva (Mandrake) 9.0 and higher UNIX AIX 4.3 and higher Operating System Versions Supported UNIX Free BSD 4.2 and higher UNIX Sun Solaris 8 and higher ...
Page 6 - External Console Port:; Cable Kit connects to the KVM switch here, allowing you to attach an
6 4.4 Components (continued) 4. Introduction (continued) 1 Power Socket: This is a standard C14 AC power socket. The power cord that comes with the unit plugs in here. 2 Power Switch: This is a standard rocker switch that powers the unit on and off. 3 External Console Port: The included USB/PS2 Comb...
Page 7 - General Safety Instructions; Rack Mounting Safety Instructions; device into or out of a rack the slide rails can pinch your fingers.
7 5. Installation 5.1 General Safety Instructions • Read all of these instructions. Save them for future reference. • Follow all warnings and instructions marked on the device. • Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will resu...
Page 8 - detailed mounting instructions.; Standard Rack Mounting
8 The NetDirector Console KVM Switch with IP Access is designed for mounting in a 1U rack system. For convenience, a rack mounting kit is included with your console KVM switch for quick installation. The various mounting options are explained in the sections that follow. Standard Rack Mounting The s...
Page 9 - Button; The Adjustment Settings; Setting; Adjust Color; to the following steps and installation diagram.
2 3 4 5 6 7 9 5.6 LCD OSD Configuration 5.7 Single Stage Installation 5. Installation (continued) The LCD Buttons The LCD OSD allows you to set up and configure the LCD display. Four buttons are used to perform the configuration, as described in the table below: Button Function MENU When you have no...
Page 10 - Network Setup-IP Address Configuration; administrator
B020-U08-19-IP 10 5.8 Multi-Stage Daisy-chain Installation 5.9 Network Setup-IP Address Configuration 5. Installation (continued) The number of connected computers can be increased by daisy-chaining additional B022-016 or B022-U16 KVM Switches. Up to 504 computers can be connected by daisy-chaining ...
Page 11 - Network
11 5. Installation (continued) 5.9.1 Local Console (continued) 5.9.2 IP Installer 5.9.3 Browser 2. Press the [F4] key to bring up the OSD Admin page. 3. In the OSD Admin page, highlight SET IP ADDRESS and press the [Enter] key. 4. DHCP – The first field allows you to enable or disable DHCP. When ena...
Page 12 - If accessing the KVM for the first time, enter in the; information. (See page 43 for further details on the; Apply; Upon logging out of the web interface, the KVM will be reset and the
12 5. Installation (continued) 5.9.3 Browser (continued) 3. If accessing the KVM for the first time, enter in the username administrator and the password password . For security purposes, it is strongly recommended that you change the username and password on this account to something unique. (See U...
Page 13 - computers connected to each KVM switch you are powering off.; is; password; password on this account to something unique. Once the KVM has been
13 6. KVM Operation Computers connected to the B020-U08-19-IP can be accessed via the local console or over IP. This chapter discusses the basic operation of the KVM switch, both locally and remotely. 6.1 Sharing USB Peripheral Devices 6.2 Powering Off and Restarting 6.3 Local Console Login The USB ...
Page 14 - Local Console OSD Invocation Sequence; Local Console Port Access; Local Console OSD Main Screen Headings
14 6.4.1 Local Console OSD Invocation Sequence 6.4 Local Console Port Access Once logged into the KVM, you can access connected computers via the local console using the Local Console OSD, Local Console Pushbuttons or Hotkey Commands . The following sections describe all of the ways in which you can...
Page 17 - Hotkey Summary Table; Hotkey Operation; Logging Into the KVM over IP; Web Browser, AP Windows Client and AP Java Client.; and the; following page displayed:
17 6. KVM Operation (continued) 6.4.10 Local Console Hotkey Commands (continued) 6.5.1 Logging In via Web Browser Hotkey Summary Table Note: All of the hotkey commands in this table require Hotkey Mode to be invoked prior to implementing the hotkey command. (See page 15 for details on invoking Hotke...
Page 18 - Logging In via the AP Windows Client; OK
18 6. KVM Operation (continued) 6.5.2 Logging In via the AP Windows Client In the event you do not want to connect to the KVM switch via web browser, you can use the AP Windows Client located on the CD to provide non-browser access to the KVM switch via a Windows computer. Note: The AP Windows Clien...
Page 19 - Save the AP Java Client from the CD to a desired location on your; of the KVM; Connect; If accessing the KVM for the first time, enter in the; Web Browser and Non-Browser Remote Port Access; is displayed. When logging in via web browser,
19 6. KVM Operation (continued) 6.5.3 Logging In via the AP Java Client Computers not running Windows can use the AP Java Client located on the CD to provide non-browser access to the KVM switch. Note: The AP Java Client requires that the Java Runtime Environment (JRE) be installed on your computer....
Page 20 - Configuration; Icon
20 6. KVM Operation (continued) 6.6.1 Port Access via Remote OSD 6.6.2 Port Access via Remote OSD Toolbar The remote OSD displays the ports and KVM stations in the installation in a tree format. KVM stations are displayed with a +/- sign next to them, which when clicked will display or hide the port...
Page 22 - Auto Scan Mode
22 6. KVM Operation (continued) 6.6.4 Remote Auto Scan 6.6.5 Panel Array Mode When Auto Scan Mode is invoked via the remote OSD toolbar, the KVM begins scanning according to the Scan Select and Scan Duration settings in the Configuration tab of the remote OSD (see page 32 for details). During an aut...
Page 23 - When the; Action; When you have finished entering the new hotkey command, click the
23 6. KVM Operation (continued) 6.6.6 Remote Control Panel When accessing connected computers over IP, a control panel appears in the lower-right corner of your screen. The remote control panel allows you to perform tasks and edit settings related to the remote session. The icons provided in the rem...
Page 24 - Set to grayscale
24 6. KVM Operation (continued) 6.6.6 Remote Control Panel (continued) The table describes each of the settings in the Video Settings screen: Setting Description Screen Position Adjust the horizontal and vertical position of the remote computer window by clicking the arrow buttons. Auto-Sync Click t...
Page 25 - Button Description; User List; • The names of all the logged in users appear in the
25 6. KVM Operation (continued) 6.6.6 Remote Control Panel (continued) The buttons on the button bar are toggles. Their actions are explained in the table: Button Description Enable/Disable Chat: When disabled, this icon displays next to the disabled user’s name in the User List panel of all users’ ...
Page 27 - Local Console OSD; have access to all features in the OSD, whereas; Quick View; Enter
27 7. Administration (continued) 7.1 Local Console OSD Upon logging into the Local Console OSD , the main page appears (see figure). Administrators have access to all features in the OSD, whereas Users have access to everything except the F4 Admin page and the F6 Broadcast (BRC) function. The Local ...
Page 29 - This; The settings in the; F4 ADM; page are explained in the following table:
29 7.1.3 Local Console OSD F4 Administration (ADM) Page 7. Administration (continued) This Administrator-only page allows administrators to configure the settings of the KVM switch. To change a setting: 1) Double-click on it, or highlight it and press the [ Enter ] key. 2) After you select an item, ...
Page 30 - – Both consoles are enabled.; Next
30 Setting Description KEYBOARD LANGUAGE Sets the language for an external keyboard connected to the KVM’s external keyboard port. To select a keyboard language, double-click on the desired language or highlight it and hit the [Enter] key. You can choose between US English, UK English, German, Swiss...
Page 31 - Firmware Upgrade Recovery; Upon logging into the KVM over IP, you are connected to the first
31 7.1.4 Local Console Firmware Upgrade (continued) 7.2.1 Remote OSD List Drop-Down 7. Administration (continued) Firmware Upgrade Recovery In the event of a firmware upgrade failure, or an aborted firmware upgrade, perform a firmware upgrade recovery by doing the following: 1. Power OFF the switch....
Page 32 - settings of the KVM switch. When clicked on, the
32 7.2.2 Remote OSD Configuration Tab 7.2.3 Remote OSD Administration Tab 7. Administration (continued) The Configuration tab (see diagram) allows administrators and users to set up their working environment. A separate profile for each is stored by the OSD and is activated according to the username...
Page 34 - User Management; Port; Program
34 7.2.3 Remote OSD Administration Tab (continued) 7. Administration (continued) User Management – Permissions The following permissions are included in the Add User and Edit User screens of the User Management tab, and determine what access rights are available to each account: • Win Client : When ...
Page 35 - ANMS; Character; Gives the corresponding account administrator privileges.; Description; Web Management
35 ANMS The Advanced Network Management Settings (ANMS) screen box allows you to set up login authorization management from an external source. From this screen, administrators can set up remote management via RADIUS and/or LDAP/S, and set up the access port and MAC address for the Windows-based log...
Page 41 - Function; Enable ICMP; mouse pointers, eliminating the need to constantly re-sync the two
41 7.2.3 Remote OSD Administration Tab (continued) 7. Administration (continued) Customization The Customization screen allows administrators to upgrade the IP firmware of the KVM and configure settings related to KVM operation. The sections that follow discuss the settings you will find on this pag...
Page 42 - button to set the KVM up for reset upon logging out.; Web Management Interface; allows administrators to configure the KVM
42 7.2.3 Remote OSD Administration Tab (continued) 7. Administration (continued) Customization – I/O Clicking the Attributes button in the I/O panel brings up a dialog box that allows you to set the port operating systems and Quick View ports. These settings can only be edited in the Local Console O...
Page 43 - Local Console OSD; Access Ports; IP Address and DNS Server
43 7.3.1 General Information 7.3.2 Network 7. Administration (continued) As previously mentioned, the General Information page is the first page you see upon logging into the Web Management Interface . When navigating through the Web Management Interface , you can always display the General Informat...
Page 44 - IP Installer
44 7. Administration (continued) 7.3.2 Network (continued) 7.3.3 Security IP Installer Settings An IP Installer utility is provided on the CD that comes with the KVM switch, which gives you a simple way to ascertain and configure the KVM’s IP address. When invoked, the IP Installer scans the network...
Page 46 - In the left panel of the screen that comes up, right-click
46 Extend and Update the Active Directory Schema – Create a New Attribute 1. Open Control Panel Administrative Tools Active Directory Schema . 2. In the left panel of the screen that comes up, right-click Attributes . 7. Administration (continued) 7.3.4 ANMS (continued) 3. Select New Attribute . 4. ...
Page 51 - Mouse Sync Mode
51 7. Administration (continued) 7.3.6 Customization The Customization screen allows administrators to configure settings related to KVM operation. The sections that follow discuss the settings you will find on this page. Client Timeout Control If there is no keyboard/mouse input for the amount of t...
Page 54 - Events; menu consists of two items; Item; Log Server; • Most; Search; Options; menu consists of only one function; menu consists of two options; The Log Server Main Screen; is divided into two main panels an upper
54 7. Administration (continued) 7.4 Log Server (continued) Events The Events menu consists of two items; Search and Maintenance . Search Search allows you to search for events containing specific words or strings. When you access this function, a screen similar to the one that follows appears: A de...
Page 55 - The List Panel; The; Field; The Event Panel
55 7. Administration (continued) 7.4 Log Server (continued) The List Panel The List panel contains the following fields: Field Description Recording Determines whether the Log Server records log events for the corresponding KVM switch. If this checkbox is checked, the field displays Recording , and ...
Page 56 - Specification; OSD Default Settings; Scroll Lock
56 8. Specifications Specification B020-U08-19-IP Computer Ports HD18 Female (8) KVM Cable Kit Model P778-Series KVM Cable Kit Connectors KVM Side: HD18 Male Computer Side: HD15 Male, USB A Male, (2) PS/2 Male Included Cable Kits P778-006 6ft Cables (2) Port Expansion Daisy-chain Daisy-chain Ports D...
Page 57 - Keyboard Emulation; Mac Keyboard; the Mac keyboard. The emulation mappings are listed in the table:; Sun Keyboard; key is used in conjunction with other; PC Keyboard
57 8. Specifications (continued) 8.2 Keyboard Emulation Mac Keyboard The PC compatible (101/104 key) keyboard can emulate the functions of the Mac keyboard. The emulation mappings are listed in the table: PC Keyboard Mac Keyboard [Shift] [Shift] [Ctrl] [Ctrl] [Ctrl] [1] [Ctrl] [2] [Ctrl] [3] [Ctrl] ...
Page 58 - equipment from Tripp Lite they are entitled to:; Warning; mixture with air, oxygen or nitrous oxide.; Warranty Registration
58 WARRANTY REGISTRATION Visit www.tripplite.com/warranty today to register the 1-year limited warranty for your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!** No purchase necessary. Void where prohibited. Some restrictions app...
