Tripp Lite B006-VUA4-K-R - Manual

6 Hardware Setup Safety Instructions • Read all of these instructions. Save them for future reference.• Follow all warnings and instructions marked on the device.• Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result. • Do not us...

1 2 3 3 4 5 7 8 8 7 Hardware Setup continued • If the following conditions occur, unplug the device from the wall outlet and bring it to qualified service personnel for repair. —The power cord or plug has become damaged or frayed.—Liquid has been spilled into the device.—The device has been exposed ...

8 Basic Operation Powering Off and Restarting In the event that you need to power off the KVM switch, you must follow the steps below:1. Shut down all computers connected to the KVM switch.2. Unplug the power supply from the KVM switch.3. Wait 10 seconds and then plug the power supply back into the ...

9 Port Switching There are four ways of accessing computers and devices connected to the B006-VUA4-K-R KVM switch:• Manual Push-buttons• Mouse port switching functionality• Hotkeys• OSD (On-Screen Display) Manual Push-Buttons Pressing a push-button will bring the focus of one of the following to the...

10 Mouse Port Switching Functionality When enabled, the Mouse Port Switching Functionality allows users with scroll mice to simultaneously switch the focus of the KVM, Audio and USB between ports by double-clicking the scroll wheel on their mouse. When used, ports will be accessed in sequential orde...

11 Hotkeys continued Simultaneously Switching KVM, Audio and USB Focus to a Desired Port To simultaneously switch the KVM, Audio and USB focus to a desired port, perform the following command:1. Activate Hotkey Setting Mode using the aforementioned command.2. Press and release the number key for the...

12 Hotkeys continued Switching Audio Focus Only to a Desired Port To switch only the Audio focus to a desired port, perform the following command:1. Activate Hotkey Setting Mode using the aforementioned command.2. Press and release the number key for the desired port (1, 2, 3 or 4).3. Press and rele...

13 Hotkeys continued Initiate an Auto Scan Auto Scan allows you to switch between ports at regular intervals without having to manually switch between them. This hotkey command initiates an Auto Scan using the Scan Duration entered into the OSD. (See page 20 for details.) By default, the Scan Durati...

14 Skip Mode continued 2. Press and release one of the arrow keys ( ↓, ↑, →, ← ). You will automatically be entered into Skip Mode and sent to either the next port, previous port, port 1 or port 4, depending on which arrow key you pressed. 3. Once in Skip Mode, you can press an arrow key to jump to ...

15 Hotkeys continued Hotkey Command Summary Table Action Hotkey Command Activate Hotkey Setting Mode Press and hold the [Scroll Lock] key, press and re-lease the minus [-] key, release the [Scroll Lock] key. Change Hotkey Setting Mode Activation Command to [Ctrl], [F12] Activate Hotkey Setting Mode,...

16 OSD The OSD (On-Screen Display) can also be used to switch functionality focus from one port to another. The following section discusses OSD operation. OSD Operation The OSD (On-Screen Display) is a menu-based interface that allows you to access con-nected components and change the KVM settings. ...

17 OSD Main Page Functionality As with Hotkeys or Push-buttons, the OSD Main Page allows you to individually switch functionality to a desired port, or switch all functionality simultaneously. This can be done using your keyboard or mouse. You can also use the OSD Main page to activate Auto Scan mod...

18 OSD Main Page Functionality continued Individually Switch KVM, USB and Audio Focus via Mouse 1. When in the OSD Main menu, click on the [F1] text to bring up the highlight bar in the KVM column, [F2] to bring up the highlight bar in the USB column, or [F3] to bring up the highlight bar in the Aud...

19 OSD Main Page Functionality continued F8: Logout Pressing the [F8] key or clicking on the [F8] text at the bottom of the OSD Main Page will bring up a prompt asking you if you wish to logout of the KVM switch. Press [Y] and then press the [Enter] key to logout of the KVM. You will be required to ...

24 Appendix Mac Keyboard Emulation The PC compatible (101/104 key) keyboard can emulate the functions of the Mac keyboard using the PC keystrokes in the table below. Note: When more than one key is required on the PC Keyboard to emulate the Mac keyboard, press and release the first key, and then pre...

25 Appendix continued Factory Default Settings Setting Default Administrator Username Administrator Administrator Password Password OSD Hotkey [Scroll Lock], [Scroll Lock] Hotkey [Scroll Lock], [-] Button Settings [Mode 1] Port Display Duration 3 Seconds Scan Duration 3 Seconds Screen Blanker-Set Ti...

26 Specifications Feature Specification Number of Computer Ports 4 Expandable (Cascade/Daisychain) No Form Factor Desktop/Rackmount (Comes with 1U Rackmount Kit) Port Selection OSD, Hotkeys, Push-buttons, Mouse Switching Function* Console Keyboard/Mouse Ports (x2) USB, (x2) PS/2** Console Video Port...

27 Warranty & Warranty Registration 1-YEAR LIMITED WARRANTYSeller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of 2 years from the date of initial purchase. If the product should prove def...