Tripp Lite 93-1819 - Manual
Tripp Lite 93-1819 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – MONTAGE; CONNECTION DE L’EQUIPEMENT; US; UL
- Page 3 – (Modelos con toma directa al; MONTAJE
- Page 4 – LIFETIME LIMITED WARRANTY; GARANTIE LIMITÉE DE VIE; SERVICIO EN MÉXICO
1111 W. 35th Street
Chicago, IL 60609 USA
(773) 869-1234
www.tripplite.com
TRIPP LITE
POWER STRIPS
(Hardwire Models)
Your Power Strip is designed to provide convenient multiple AC outlets. NOTE: The Power Strip
DOES NOT provide your connected equipment with surge or line noise protection.
MOUNTING
Hardwire Power Strip models feature mounting holes in the back cover for permanent mounting
to a variety of flat surfaces.
1. Remove cover by unfastening screws located on each side of the unit.
2. Mark a straight, horizontal line where you want to mount the Power Strip. Place the
Power Strip along the line, ensuring that the line intersects the center of each mounting
hole.
3. Using screws and other appropriate hardware (user supplied), mount the Power Strip to
the surface.
ELECTRICAL CONNECTION
Connect your Power Strip to a circuit provided with adequate overload protection (either a circuit
breaker or a fuse).
1. Remove knockout on the Power Strip end located closest to desired electrical source.
2. Install 1/2 in (1.3 cm) BX connector.
3. Connect incoming ground wire
to closest ground lug inside the
Power Strip.
4. Connect incoming hot (black)
wire to the Power Strip's internal
hot (black) wire using supplied
wire nut.
5 . C o n n e c t i n c o m i n g n e u t r a l
(white) wire to the Power Strip's
internal neutral (white) wire using
supplied wire nut.
6. Reinstall Power Strip cover.
EQUIPMENT CONNECTION
Plug your equipment into the Power Strip's AC receptacles. DO NOT plug in equipment that
draws more than the amperage rating of your circuit, or you will either trip your circuit breaker or
blow your fuse. If this occurs, remove overload and reset circuit breaker or replace fuse.
Français : p. 2; Español: p. 3
Step #3
Copyright 2000 Tripp Lite. All rights reserved.
C
US
UL
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 BARRES DE COURANT (Modèles Pour Installation Fixe) Votre Barre de Courant est conçue pour fournir du C.A. aux prises multiples de manière pratique.NOTE: La Barre de Courant NE PROTEGE PAS pas votre équipement connecté contre les surtensionsou les bruits de ligne. MONTAGE Les modèles de Barre de Co...
3 BARRAS DE CONTACTOS POWER STRIP (Modelos con toma directa al panel eléctrico) Las barras de contactos de la serie Power Strip han sido diseñadas para proveer mútiples receptáculosde CA. IMPORTANTE: Las barras de contactos Power Strip NO proveen protección contra picos oruidos de línea. MONTAJE Las...
4 LIFETIME LIMITED WARRANTY Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material andworkmanship for its lifetime. If the product should prove defective in material or workmanship within that period, Seller will repairor re...
