Tripp Lite 240/415V - Manual
Tripp Lite 240/415V – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Important Safety Warnings; UPS Location Warnings; UPS Connection Warnings
- Page 3 – Control Panel; FRONT PANEL
- Page 4 – Rear Panels
- Page 6 – Installation; UPS LOCATION; UPS BATTERY MODULE HARDWIRE CONNECTION
- Page 7 – TURNING THE UPS ON; TURNING THE UPS OFF
- Page 8 – LCD DISPLAY SELECT BUTTON
- Page 11 – DRY CONTACT INTERFACE; Communications
- Page 12 – LIMITED WARRANTY
- Page 13 – Specifications
Owner’s Manual
1111 W. 35th Street • Chicago, IL 60609 USA
(773) 869-1234 • www.tripplite.com
Copyright ©2005 Tripp Lite. All rights reserved. SmartOnline™ is a trademark of Tripp Lite.
SmartOnline
™
3-Phase 20kVA & 30kVA
Intelligent True On-Line UPS Systems
Input/Output* Voltage: 220/380, 230/400, 240/415V AC, 3ø, 4 wire (plus ground), wye
* User-selectable.
For all UPS system modules (power module and battery module) sold either separately or combined.
Select UPS system modules may include separate instruction or warning sheets which should be used
in conjunction with this manual.
Important Safety Warnings
Control Panel
Installation
Rear Panels
2
3
4
6
Operation (Normal Conditions)
7
Operation (Special Conditions)
9
Communications
11
Service/Warranty
12
Specifications
13
Español
14
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Important Safety Warnings SAVE THESE INSTRUCTIONS. This manual contains important instructions and warnings that should be followed during the installation andmaintenance of all Tripp Lite SmartOnline 3-Phase 20kVA and 30kVA UPS Systems and their batteries. UPS Location Warnings • Install your UPS...
1 2 3 4 13 12 7 10 11 9 8 5 6 3 Control Panel There are two separate UPS system modules: a power module and a battery module. Familiarize yourself with the location and function ofthe features on each module before installing and operating your UPS system. The power module is the only module which i...
4 Rear Panels 1. Manual Bypass Switch: This dial is used in one step of putting the UPS in "BYPASS” mode, which must be done before performing any maintenance on the UPS with the connected load supported. [See “Operation (Special Conditions)” for step-by-step instructions forgoing into “BYPASS.”...
