Tripp Lite 2200XLT - Manual
Tripp Lite 2200XLT – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety
- Page 3 – Installation
- Page 4 – Switches; Basic Operation
- Page 5 – Indicator Lights
- Page 6 – Other UPS Features
- Page 7 – Specifications; Storage
1
Copyright © 1999 Tripp Lite. All rights reserved. SmartPro
®
is a registered trademark of Tripp Lite.
Installation:
p. 3 - 4
Basic Operation:
p. 4 - 6
Storage & Service:
p. 7
Specifications:
p. 7
Safety:
p. 2
Warranty & Insurance:
p. 6
1111 W. 35th Street
Chicago, IL 60609 USA
Customer Support: (773) 869-1234
www.tripplite.com
Owner's Manual
SmartPro
®
2200XLT
Line-Interactive
UPS Systems (230V)
9911081 230V Smartpro 2200T OM.p65
11/24/99, 12:00 PM
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 This manual contains important instructions and warnings that should befollowed during the installation, operation and storage of all Tripp Lite UPSSystems. UPS Location Warnings • Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight. • For best performance, keep th...
3 Installation Plug your UPS intoan electrical outlet. The SmartPro 2200XLT should be connected to a15-amp dedicated circuit. Plug your equipmentinto your UPS. Turn your UPS ON. Set the System Enable Switch (DIPSwitch #4, UPS back panel) to the“ENABLE” (UP) position. (See Figure 1)This switch activa...
4 Switches System Enable Switch (DIP Switch #4) This switch is located in the set of 4 switches next to the UPS’s DB9ports. It activates the battery charger and intelligent microproces-sor. Always leave it in the “ENABLE” (UP) position when your UPSis plugged in. Set the switch to “DISABLE” (DOWN) o...
