Tripp Lite 120V Input/Output - Manual
Tripp Lite 120V Input/Output – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Important Safety Instructions; UPS Location Warnings; Quick Installation; SAVE THESE INSTRUCTIONS
- Page 3 – USB Communications; Basic Operation; Buttons
- Page 4 – Storage; Other UPS Features; Indicator Lights
- Page 5 – Manual de operación; OmniSmart; English
- Page 6 – Instalación rápida; Advertencias sobre la ubicación del UPS; Importantes instrucciones de seguridad; GUARDE ESTAS INSTRUCCIONES
- Page 7 – Operación básica; Comunicaciones USB; Botones
- Page 8 – Otras prestaciones del UPS
- Page 9 – Guide de l'utilisateur; USB Omnismart; Almacenamiento
- Page 10 – Installation rapide; Importantes consignes de sécurité
- Page 11 – Exploitation de base; Suppression de surtension sur; Communications USB; Commutateurs
- Page 12 – Autres fonctions
- Page 13 – Specifications; Entreposage; Entreposage et entretien
Owner’s Manual
1111 W. 35th Street Chicago, IL 60609 USA
Customer Support: (773) 869-1234 • www.tripplite.com
Important Safety Instructions
2
Quick Installation
3
Basic Operation
4
Storage & Service
7
Specifications
8
OmniSmart
™
& SmartPro
®
USB
120V Input/Output, Line-Interactive UPS Systems
Copyright
©
2003 Tripp Lite. All rights reserved.
OmniSmart
™
is a trademark of Tripp Lite. SmartPro
®
is a registered trademark of Tripp Lite.
Español
9
Français
17
UL1778
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Important Safety Instructions 2 UPS Location Warnings • Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight. • For best performance, keep the indoor temperature between between 32º F and 104º F (0º C and 40º C). • Leave adequate space around all sides of the UPS for ...
4 Use the ON/OFF button to do three things: Switch your UPS’s Operating Mode: While your UPS is plugged into a live AC outlet, press the ON/OFF button and hold it until you hear a beep (about 2 seconds) to toggle between the following operat-ing modes. Choose your UPS’s operating mode based on the r...
All Indicator Light descriptions apply when the UPS is plugged into an AC outlet and turned on. LINE POWER: This green light will turn ON whenever your UPS is receiving normal AC line power. It will flash while the UPS is in CHARGE ONLY mode to indicate that the UPS will not provide battery backup d...
