Toshiba L1400UC - Manual

Your TV comes with:

• Remote control and batteries
• Resource Guide.
• Pedestal stand and hardware
• All other cables and adapters are sold

separately.

• If any items are missing or damaged, notify

your dealer immediately.

• For Canada, the terms and conditions of

the Limited One (1) Year Warranty on Parts
and Labour can be found at

www.toshiba.ca/support

Click on Televisions,

Select Warranty, then Select Standard Warranty
& Service Plans and Select Flat Panel
Television (bilingual)

The Resource Guide contains important safety precautions not included in this

document. Please review completely prior to using this product. Complete

instructions are contained in the User's Guide located on Toshiba's web site at :

www.toshiba.ca/support/ceg

Register Your Toshiba Television

Enhance your ownership experience by taking a few minutes to register your Toshiba product at

support.toshiba.ca/warranty/

(for L1400UC series).

Completing product registration allows Toshiba to provide you

with product information updates, special offers and promotions. Failure to complete product registration will not diminish
your rights under the Standard Limited Warranty.

Pedestal Assembly Instructions

To prevent possible electric shock, protect the power cord

from being pinched when attaching the pedestal stand.

Before beginning pedestal assembly, carefully lay the front of

the LCD Panel face down on a flat, cushioned surface such as a

quilt or blanket. Leave the bottom of the unit protruding over the

edge of the surface and assemble pedestal as indicated below.

Two people are required for installation to avoid injury or

damage to the TV.

Extreme care should always be used when attaching the

pedestal stand to avoid damage to the LCD panel.

For safety information, please review the User’s Guide online:
For Canada: www.toshiba.ca/support/ceg

QUICK START

Check the components

Unpack the box

1. Remove the components and TV from

the box. Save the packing materials in
case you need them later.

2. Remove the documentation for

important information.

A High-Definition signal is needed to receive a High-Definition picture.

Once you have a High-Definition signal you need to connect it to a

High-Definition input on your TV. Not all channels are currently

broadcasting in HD. Standard analog TV channels and HD channels, even

on the same network, broadcast on different channels. (Example: ABC

analog may be on channel 4, while ABC-HD may be on channel 104.)

To display your TV using a Wall Bracket:

Be sure to remove the pedestal stand before mounting your TV with a

wall bracket. Always use a wall bracket Listed by an independent

laboratory (such as UL, CSA, ETL) that is appropriate for the size and

weight of the TV:

Two people are required for installation to avoid injury or

damage to the TV.

1. Unplug and remove any cables and/or other component connectors

from the rear of the TV.

2. Follow the instructions provided with your wall bracket. Before

proceeding, make sure the appropriate bracket(s) are attached to the

wall and the back of the TV as described in the instructions provided

with the wall bracket.

Always use the screws supplied or recommended by

the wall mount manufacturer.

VESA Mounting Pattern

TV Size

Hole Pattern (H x V)

Screw Size

23"

100mm x 100mm

M4

L1400UC Series

To display your TV on the included Pedestal Stand:

Observe the following safety precautions:

1. Read and follow the pedestal assembly instructions section in this document

Before beginning pedestal assembly, carefully lay the TV facedown on a

flat, cushioned surface such as a quilt or blanket. Leave the bottom of the

unit protruding over the edge of the surface and assemble the pedestal as

indicated below.

Extreme care should always be used when attaching or removing the pedestal

stand to avoid damage to the display panel.

2. Assemble the pedestal stand with the hardware provided.

3. After assembling the pedestal, place the TV on a sturdy, level surface that can

support the weight of the TV.

4. Be sure to secure the TV to a wall stud, pillar, surface, or other immovable structure.

Choosing a location for your LED TV

23L1400UC (Canada model)

Many questions regarding parts, service, and warranties can be answered by visiting the Customer
Support Section of our website:

THANK YOU

If you are experiencing a technical problem or have questions regarding operation, authorized service centers,
warranty or parts, please contact our Customer Support Center at:

Always place the TV on a sturdy, level, stable surface that can support

the weight of the unit. Secure the TV with a mounting screw.

• Place the TV on a sturdy surface that has a sufficient

thickness and screw the unit to the surface securely by using a

mounting screw and the fall-prevention screw hole. (Mounting screw

not included)

For L1400UC series (Canada model):

1-800-268-3404 From within Canada

L1400UC series: www.toshiba.ca/support/ceg

Get detailed product information:

For up-to-date product information,

visit

www.toshiba.ca/support/ceg

For detailed product specifications,

Select Product

, then

select Model

and

select Model Number.

23L1400UC model

x 1

23 L1400UC

B

x 1

23 L1400UC

x 6 (23L1400UC)

C

23 L1400UC

M4 ; L12mm

23” TV

VESA Mounting Pattern

(Sample illustration)

Two stand screws

•

Subject to Change

.

Product specifications, configurations, prices,

system/component/options availability are all

subject to change without notice.

Notice