Toshiba B-EX4 - Manual

Toshiba B-EX4

Toshiba B-EX4 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
43 Page 43
44 Page 44
45 Page 45
46 Page 46
47 Page 47
48 Page 48
49 Page 49
50 Page 50
51 Page 51
52 Page 52
53 Page 53
54 Page 54
55 Page 55
56 Page 56
57 Page 57
58 Page 58
59 Page 59
60 Page 60
61 Page 61
62 Page 62
63 Page 63
64 Page 64
65 Page 65
66 Page 66
67 Page 67
68 Page 68
69 Page 69
70 Page 70
71 Page 71
72 Page 72
73 Page 73
74 Page 74
75 Page 75
76 Page 76
77 Page 77
78 Page 78
79 Page 79
80 Page 80
81 Page 81
82 Page 82
83 Page 83
84 Page 84
85 Page 85
86 Page 86
87 Page 87
88 Page 88
89 Page 89
90 Page 90
91 Page 91
92 Page 92
93 Page 93
94 Page 94
95 Page 95
96 Page 96
97 Page 97
98 Page 98
99 Page 99
100 Page 100
101 Page 101
102 Page 102
103 Page 103
104 Page 104
105 Page 105
106 Page 106
107 Page 107
108 Page 108
109 Page 109
110 Page 110
111 Page 111
112 Page 112
113 Page 113
114 Page 114
115 Page 115
116 Page 116
117 Page 117
118 Page 118
119 Page 119
120 Page 120
121 Page 121
122 Page 122
123 Page 123
124 Page 124
125 Page 125
126 Page 126
127 Page 127
128 Page 128
129 Page 129
130 Page 130
131 Page 131
132 Page 132
133 Page 133
134 Page 134
135 Page 135
136 Page 136
137 Page 137
138 Page 138
139 Page 139
140 Page 140
141 Page 141
142 Page 142
143 Page 143
144 Page 144
145 Page 145
146 Page 146
147 Page 147
148 Page 148
149 Page 149
150 Page 150
151 Page 151
152 Page 152
153 Page 153
154 Page 154
155 Page 155
156 Page 156
157 Page 157
158 Page 158
159 Page 159
160 Page 160
161 Page 161
162 Page 162
163 Page 163
164 Page 164
165 Page 165
166 Page 166
167 Page 167
168 Page 168
169 Page 169
170 Page 170
171 Page 171
172 Page 172
173 Page 173
Page: / 173

Table of Contents:

  • Page 2 – TABLE OF CONTENTS; NOTE FOR OPTIONAL EQUIPMENT INSTALLATION
  • Page 6 – The contents of this manual may be changed without notification.
  • Page 8 – plate to remove the ribbon shaft pad from the printer.; OPEN
  • Page 9 – Keep the carton and pads for later transport.; INSTALLATION; ) Place the printer on the level surface.
  • Page 10 – covers to catch them.
  • Page 11 – Printer Block
  • Page 12 – Free; O p e n p o s i t i o n; Ribbon Shaft Holder Plate
  • Page 13 – ) Raise the print head block until it stops.; Print Head Block
  • Page 14 – REMOVING THE OPERATION PANEL; removed from the printer.; Hooks
  • Page 15 – Operation Panel Ass’y
  • Page 16 – INSTALLATION PROCEDURE FOR OPTIONAL; Disc cutter
  • Page 17 – Front Plate
  • Page 19 – Cord Bush; Cutter Cover; Print Head Cleaner; Frame A and Rotary Cutter Frame B, respectively.
  • Page 21 – Cutter Paper Guide C
  • Page 22 – Hooker
  • Page 23 – Harness Ass’y
  • Page 24 – 1) Open the ribbon shaft holder plate.; Main PC Board
  • Page 25 – Cutter Unit
  • Page 26 – Screw
  • Page 29 – Rewinder Ass’y
  • Page 30 – Hole
  • Page 31 – Selection Switch
  • Page 32 – TBD
  • Page 34 – Adjustment Knob
  • Page 35 – RSV PC Board
  • Page 36 – Lock
  • Page 38 – Packing List; Installation Manual (1 copy; Installation Procedure; Be careful not to pinch your fingers or hands with the covers.
  • Page 39 – Connector J21
  • Page 41 – Remove the Blind Plate D from the back.; Blind Plate D
  • Page 42 – Reassemble the side panel (L) in the reverse order of removal.
  • Page 47 – Remove the Blind Plate A from the back.; Blind Plate A
  • Page 49 – MODE; LED Illuminates
  • Page 51 – Outline of Self-Diagnostic Test
  • Page 52 – Menu operation procedure example
  • Page 53 – COUNTER PARAMETE PRINT CONTENTS
  • Page 54 – Every cut operation is counted.
  • Page 60 – RTS protocol
  • Page 64 – USB MEMORY NG
  • Page 67 – Resistance
  • Page 70 – BASIC S NONE
  • Page 72 – PARAMETER SETTING; Outline of Parameter Setting; Parameter Setting; menu contains the following:
  • Page 74 – Disable ribbon save function
  • Page 79 – “X” indicates the remaining number of labels.)
  • Page 80 – XML
  • Page 85 – Fine adjustment value setting/ ADJUST SET; Outline of Printer Parameter Fine Adjustment
  • Page 86 – 単位
  • Page 87 – Cut position; performed with the head lifted, the head may not be lifted.
  • Page 88 – (a) Cut position fine adjustment value calculation; Operation example; Label pitch
  • Page 89 – ejected passes the paper feed roller, the sensor may not be able to
  • Page 90 – mm
  • Page 94 – Supplementary explanation
  • Page 95 – Speed
  • Page 96 – Outline of Test Print; Test Print
  • Page 103 – SENSOR ADJUSTMENT; Outline of the Sensor Adjustment
  • Page 105 – クリア
  • Page 112 – IP ADDRESS SETTING; Outline of the IP Address Setting; IP Address Setting
  • Page 120 – Outline of Basic Setting
  • Page 121 – RFID Module Setting; Outline of the RFID Module Setting
  • Page 130 – Example 1
  • Page 132 – LCD Display example; not used by any other devices.; Strength; “MAX 0011” means the value of the maximum radio wave picked up.
  • Page 133 – LED function; ]LED; Key function
  • Page 134 – Error messages; Error Messages; Close the Print Head Block.; COMMS ERROR; A communication error has occurred.
  • Page 138 – shown on 3
  • Page 140 – THRESHOLD SETTING; Threshold
  • Page 141 – Judgment display
  • Page 143 – ONLINE MODE LCD DISPLAY; ONLINE MODE LCD DISPLAY EXAMPLE
  • Page 145 – Open
  • Page 146 – EXPLANATION OF HELP DISPLAY; Error
  • Page 147 – English; Online mode; Error recovery method
  • Page 148 – PERIODIC MAINTENANCE PROCEDURE
  • Page 149 – Loosen the two Plastic Head Screws to remove the Cutter Cover.; Media Path
  • Page 151 – When the Strip Module is used; When labels skew to the right:
  • Page 154 – RFID ANALYZE TOOL; RFID tag type; System Requirement
  • Page 156 – Application Functions
  • Page 157 – Antenna Kind Information
  • Page 158 – Log Save As
  • Page 159 – Exits from the Analyze Tool program.
  • Page 161 – Makes settings for communication between the PC and the printer.; Serial port may not be selectable depending on the printer types.
  • Page 163 – Setting
  • Page 164 – Select the printer model; NOTE: This information can be saved by a parameter save function.; Select the test mode
  • Page 165 – Displays Printer Version and RFID Module Version.; Example; Example) CSV file information; Printer Version
  • Page 166 – Operating Procedure
  • Page 168 – printer is acceptable.
  • Page 169 – RFID module type to be analyzed (RFID Module Select); RFID Module Select
  • Page 170 – RFID module type; Tag; Tag Type
  • Page 171 – Set the feed amount range where an RFID tag is analyzed.
  • Page 172 – Write test
  • Page 173 – All read or write test results; Write/Read Results Box
Loading the manual

PRINTED IN JAPAN

TOSHIBA Thermal Printer

B-EX4 SERIES

Document No.

EO18-33027


Original Mar

,

2011

(Revised )

(PRELIMINARY VERSION)

Maintenance Manual

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - TABLE OF CONTENTS; NOTE FOR OPTIONAL EQUIPMENT INSTALLATION

EO18-33027 TABLE OF CONTENTS Page 1. UNPACKING-------------------------------------------------------------------------------------------------------- 1- 1 1.1 PROCEDURES ---------------------------------------------------------------------------------------------------1- 1 1.2 CHECKS --------------...

Page 6 - The contents of this manual may be changed without notification.

EO18-33027 CAUTION! 1. This manual may not be copied in whole or in part without prior written permission of TOSHIBA TEC. 2. The contents of this manual may be changed without notification. Copyright © 2011 by TOSHIBA TEC CORPORATION All Rights Reserved 570 Ohito, Izunokuni-shi, Shizuoka-ken, JAPAN

Page 8 - plate to remove the ribbon shaft pad from the printer.; OPEN

1. UNPACKING EO18-33027 1.1 PROCEDURE 1- 2 5) Open the top cover and remove the five pieces of tape. And then, open the ribbon shaft holder plate to remove the ribbon shaft pad from the printer. Top Cover Ribbon Shaft Holder Plate Ribbon Shaft Pad Tape Tape OPEN

Other Toshiba Models