Timex T152 - Manual

Limited 90-Day Warranty Information

Timex Audio Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies),

warrants this product to be free from defects in workmanship and materials, under normal use

a n d c o n d i t i o n s , f o r a p e r i o d o f 9 0 d a y s f r o m t h e d a t e o f o r i g i n a l p u r c h a s e .
Should this product fail to function in a satisfactory manner, it is best to first return it to the store

where it was originally purchased. Should this fail to resolve the matter and service still be required

by reason of any defect or malfunction during the warranty period, SDI Technologies will repair

or, at its discretion, replace this product without charge (except for a $5.00 charge for handling,

packing, return UPS/postage, and insurance). This decision is subject to verification of the defect

or malfunction upon delivery of this product to the Factory Service Center listed below. The

product must include proof of purchase, including date of purchase. The fee for service after the

warranty period or without proof of purchase is $10.00.
Before returning this product for service, please first replace the batteries (if applicable) with fresh

ones, as exhausted or defective batteries are the most common cause of problems encountered.
If service is still required:
1. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated

box.

2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date

of purchase, if within the warranty period.

3. Enclose a check or money order payable to the order of SDI Technologies, for the sum of

$5.00 ($10.00 after warranty period).

4. Send the unit prepaid and insured, to the Factory Service Center listed below.

Consumer Repair Department

SDI Technologies Inc.

Timex Audio Products Division

1401 Pullman Drive, Suite A

El Paso, TX 79936-7726

NOTE: This warranty is valid only if the product is used for the purpose for which it was designed.

It does not cover (i) products which have been damaged by negligence, misuse or accident, or

which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets,

or units damaged by excessive heat; (iii) damage to CD’s or tape cassettes (if applicable); (iv) the

cost of shipping this product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the

product subsequent to the original purchaser. Any applicable implied warranties are also limited

to 90 days, and SDI Technologies will not be liable for consequential damages. (Some states do

not allow limitations on implied warranties or exclusion of consequential damages, so these

restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also

have other rights which vary from state to state.

For questions or comments regarding this or other products, please call our toll-free number
1-800-888-4491.
TIMEX is a registered trademark of Timex Corporation in the U.S. and other countries.

Model T152

Rotating Alarm Clock

with Nature Sounds

IMPORTANT SAFETY INSTRUCTIONS

This unit has been designed and manufactured to assure your personal safety. Improper use can result

in potential electrical shock or fire hazards. Please read all the safety and operating instructions carefully

before installation and use. Keep these instructions handy for future reference. Take special note, adhere

to all warning, and always follow the instructions on the unit and in the instructions and service manuals.
1.

Water and Moisture

- The unit should not be used near water. For example: near a bathtub,

washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.

2.

Ventilation

- The unit should be situated so that its location or position does not interfere with its

proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that

may block ventilation openings. Also, it should not be placed in a built-in installation, such as a

bookcase or cabinet that may impede the flow of air through the ventilation openings.

3.

Heat

- The unit should be situated away from heat sources such as radiators, heat registers, stoves

or other appliances (including amplifiers) that produce heat.

4.

Power Sources

- The unit should be connected to a power supply only of the type described in

the operating instructions or as marked on the appliance.

5.

Grounding or Polarization

- This product is equipped with a polarized alternating current line

plug (a plug having one blade wider than the other). As a safety feature this plug will fit into the power

outlet only one way. If you are unable to fit the plug fully into the outlet, try reversing the plug. If the

plug still fails to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

6.

Power-Cord Protection

- Power supply cords should be routed so that they are not likely to be

walked on or pinched by items placed upon or against them. It is always best to have a clear area

from where the cord exits the unit to where it is plugged into an AC outlet.

7.

Cleaning

- Unplug this product from the well outlet before cleaning. Do not use liquid cleaners or

aerosol cleaners. Use a damp cloth for cleaning.

8.

Non-Use Periods

– The power cord of the unit should be unplugged from the outlet when it is to

be left unused for a long period of time.

9.

Objects and Liquid Entry

- Care should be taken so that objects do not fall and liquids are not

spilled into the enclosure through openings.

10.

Attachments

- Do not use attachments not recommended by the product manufacturer as they

may cause hazards.

11.

Lightning

- For added protection for this product during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or

cable system. This will prevent damage to the product due to lightning and power-line surges.

12.

Overloading

- Do not overload wall outlets, extension cords, or integral convenience receptacles

as this can result in a risk of fire or electric shock.

13.

Damage Require Service

- The unit should be serviced by qualified service personnel when:

A. The power supply cord or plug has been damaged.
B. Objects have fallen into or liquid has been spilled into the enclosure.
C. The unit has been exposed to rain.
D. The unit has been dropped or the enclosure damaged.
E. The unit does not appear to operate normally or exhibits a marked change in performance.

14.

Servicing

- The user should not attempt to service the unit beyond that described in the user’s

operating instructions. All other servicing should be referred to qualified service personnel.

15.

Safety Check

- Upon completion of any service or repairs to this product, ask the service telchnician

to perform safety checks to determine that the product is in proper operating condition.

16.

Antenna

- Do not connect to an external antenna.

17. If you have any questions, call SDI Technologies Inc. Timex Audio Products Division Customer Service,

1-800-888-4491.

A Consumer Guide to Product Safety

Para instruccionese en Espanol, llame al 1-800-888-4491.

For questions or comments regarding this or other products,

p l e a s e c a l l o u r t o l l - f r e e n u m b e r 1 - 8 0 0 - 8 8 8 - 4 4 9 1 .

For additional information, online registration,

and exclusive special offers visit our website:

www.timexaudio.com

1. Press the

Snooze/Off/Backlight Button

after the alarm came, the alarm will go

off and will come on again in approximately 9 minutes (Adjustable). You may repeat

this cycle during the one hour alarm cycle.

2. To adjust snooze period, slide the

Setting Switch

to

Alarm

and hold the

Snooze/Off/Backlight Button

until it show current snooze period. Then press

Hour/Month Button

to advance forward or

Minute/Date Button

to advance

backward. Snooze period can be adjust from 1 to 15 minutes.

3. As normal condition, press the

Snooze/Off/Backlight Button

to active the 10

seconds Backlight in case you are using batteries only. For using AC adapter,

backlight will be always turned on.

Set the

Dimmer Switch

to

HI

or

LO

to adjust backlight brightness depending on the

brightness in the room.

The unit has a built in thermometer which shows indoor temperature. Press the

°

F/

°

C/Year Button

to set the

°

F or

°

C reading.

Snooze/ Back-light Operation

Dimmer Switch

Thermometer

5