Page 4 - Displays month and date, as well as day of the week.; Altimeter; Records highest altitude achieved.; Introduction; Register your product at
Watch Features Time of Day • Displays hours, minutes and seconds in 12- or 24-hourformat for two time zones. • Displays month and date, as well as day of the week. • Optional hourly chime. Altimeter • Reports altitude from -2296 to 29,520 feet (-700 to9000 meters) with 10 ft or 5 m resolution. • Dis...
Page 5 - Forecasts the weather for the next 4–6 hour period.; Thermometer
Chronograph • Time events up to 24 hours with 1/100-secondresolution. • Store up to 30 lap/split times. • View stored lap times as well as best (shortest) laptime, average lap time and total event time. Count Down Timer • Time events up to 24 hours. An alert is generatedwhen the timer reaches zero. ...
Page 6 - Button Functions; Normal Operation; Watch Modes; MODE
TIMER - The Countdown Timer is useful for timing fixed-time events ALARM - Five daily alarms to keep you on time TIP: Press and hold the MODE button for three seconds to go directly to TIME mode from any other mode in thewatch. Button Functions The buttons on your watch are multi-functional, serving...
Page 7 - Setting Operation; SET
Setting Operation When setting Time of Day, Alarms or the Countdown Timerand so on, the button functions change from what is print-ed on the case.NOTE: These setting functions are the same in any modewhere you can set a value. 1. Press and hold the SET button. While you are holding the button, “HOLD...
Page 8 - Watch Display Symbols
Watch Display Symbols Alarm is armed (flashing if backup alarm is active) Chronograph is running Hourly Chime is enabled Countdown Timer is running Indicates weather forecast 5. Repeat steps 3 and 4 for each of the values you wish to set. TIP: If you accidentally skip past a setting, continue topres...
Page 9 - Notes on calibrating the Altimeter and Barometer; How often should I calibrate?; Weather Forecasting; CONDITIONS
Notes on calibrating the Altimeter and Barometer The watch relies on a sensitive electronic sensor tomeasure the air pressure and temperature. This sensormust be calibrated periodically to maintain the high degreeof accuracy you expect from the watch. What is calibration? “Calibration” is simply a t...
Page 10 - Temperature Accuracy
reference source available.For example, if you are standing at a trail head and knowthe correct altitude, then the most accurate calibration willbe obtained by calibrating within ALTI mode (since it relieson altitude as the reference). However, if you don’t knowyour altitude, you can find out the cu...
Page 12 - button, the watch will display the time for
Using the Dual Time Zone feature The watch can keep track of the time for two zones (T1 and T2). By default, T1 is the “primary” time zone (theone that you can see) and T2 is the “secondary” time zone(the one you can’t see). The indicator for the primary timezone is shown in the lower left of the di...
Page 13 - button until the time; Viewing Temperature and Air Pressure Data; While in TIME mode, press and release the
BARO - Barometer Mode Want a better understanding of the forces that influencethe weather? This is the mode to do just that – here youcan view the current air pressure (local and sea level),monitor the current temperature and study the changes inair pressure over time, presented in a graphical forma...
Page 14 - Press and release; until you see “BARO” on the; Selecting Pressure and Temperature Units
When viewing the Time of Day, Sea Level Pressure andTemperature group, press STOP/RESET to toggle tempera- ture display units (°F or °C).NOTE: Unit selection made for temperature and barometricpressure in BARO mode applies to all modes in the watch.For example, if you select “°C” for the temperature...
Page 15 - What is “Sea Level Pressure”?
What is “Sea Level Pressure”? Sea Level Pressure is simply the air pressure for a specificlocation adjusted to account for the air pressure differencedue to the altitude of the location. Because very fewplaces on the earth are actually at sea level, this adjust-ment factor was devised to allow for e...
Page 16 - Using the Altimeter; until you see “ALTI” on the dis-; ALTI - Altimeter Mode
Using the Altimeter Press and release MODE until you see “ALTI” on the dis- play. After a couple of seconds, the watch will display thefollowing data, in the order shown, for two seconds each:• The highest recorded altitude (indicated by “HIGH” inthe lower display line). • The total accumulated posi...
Page 19 - Using the Chronograph; CHRO – Chronograph Mode
track, the lap time would be the time for one lap aroundthe track, assuming that you push the START/SPLIT button as you cross the start/finish line each time. Split Time: The elapsed time from the start of the workout, sometimes called the “total time”. “Taking a Lap”: Marking the end of one segment...
Page 20 - Changing the Display Format; If no laps have yet been taken:
Changing the Display Format You have the option of viewing either the lap or split timein the large digits in the center of the watch display. Thedisplay format can be changed at any time, though themethod changes based on whether or not laps have beentaken. The word “LAP” will appear on the display...
Page 22 - HOUR MINUTE SECONDS “ONCE”/“REPEAT”; Using the Countdown Timer; TIMER - Countdown Timer Mode; Setting the Countdown Timer
HOUR MINUTE SECONDS “ONCE”/“REPEAT” Setting the Timer to “ONCE” will cause the Timer to stopafter it completes its countdown; selecting “REPEAT” willcause the Timer to repeat the countdown indefinitely untilthe Timer is manually stopped. The Timer can be set to a maximum time of 23:59.59 (24 hours)....
Page 23 - Setting an Alarm; icon on the display when in TIME
ALARM - Alarm Mode The watch includes five independent daily alarms to helpyou coordinate your schedule. Setting an Alarm Refer to section entitled “Setting Operation” on page 11 tounderstand how the buttons function during setting.• You may set the Hour and Minute value for eachAlarm. • If the watc...
Page 25 - Trademark and Warranty Information
ages, so these limitations may not apply to you. This warranty gives you specific legal rightsand you may also have other rights which vary from country to country and state to state. To obtain warranty service, please return your watch to Timex, one of its affiliates or theTimex retailer where the ...