Page 3 - Congratulations on purchasing your TIMEX
TIMEX ® WATCHES Congratulations on purchasing your TIMEX ® watch. Please read these instructions carefully to understand how to operate your Timex timepiece.Your watch may not have all of the features described in this booklet. For more information, please visit: Timex.com W223_Analog2_NA_EN.qxd 6/5...
Page 5 - WATER AND SHOCK RESISTANCE; DO NOT PRESS ANY BUTTONS OR PULL OUT; ENGLISH; Water-Resistance Depth
WATER AND SHOCK RESISTANCE If your watch is water-resistant, meter marking (WR_M) is indicated. *pounds per square inch absolute WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY BUTTONS OR PULL OUT THE CROWN UNDER WATER UNLESS YOUR WATCH IS INDICATED AS 200 METER WATER- RESISTANT. 1. Watch is...
Page 6 - ANALOG/DIGITAL MODELS; INDIGLO
ANALOG/DIGITAL MODELS 4-PUSHER ANALOG/DIGITAL MODEL WITH INDIGLO ® NIGHT-LIGHT & NIGHT-MODE ® FEATURE 5 ENGLISH 2. Watch is not a diver watch and should not be used for diving. 3. Rinse watch with fresh water after exposure to salt water. 4. Shock-resistance will be indicated on the watch face o...
Page 7 - DIGITAL DISPLAY; TO USE INDIGLO
DIGITAL DISPLAY 1) The Digital display changes to each function every time you PRESS pusher “A”. (As illustrated below):TIME / CALENDAR DAILY ALARM COUNTDOWN TIMER CHRONOGRAPH DUAL TIME 7 ENGLISH TO USE INDIGLO ® NIGHT-LIGHT 1) PRESS pusher “B” to illuminate the entire dial (Both analog and digital)...
Page 8 - TO SET TIME / CALENDAR
• To view or change the display to TIME, repeat the steps above. NOTE: “A” or “P” will appear when the 12-Hour format is selected. • Set this time to coordinate with the Analog time or another time zone. • PRESS and HOLD pusher “C” for 2 seconds in setting mode, to activate fast advance. 9 ENGLISH T...
Page 9 - TO SET DAILY ALARM
NOTE: • When the alarm sounds, it will beep for 20 seconds. • To stop the alarm beep, PRESS any pusher.• PRESS and HOLD pusher “C” for 2 seconds in setting mode, to activate fast advance. 11 ENGLISH TO SET DAILY ALARM 1) PRESS pusher “A” to bring up DAILY ALARM dis- play: “ALARM” will appear for 3 s...
Page 10 - TO USE COUNTDOWN TIMER; TO SET DAILY ALARM OR CHIME ON/OFF
TO USE COUNTDOWN TIMER 1) PRESS pusher “A” to bring up COUNTDOWN TIMER display. “24 HR TR” will appear. 2) PRESS pusher “D” to let hour flash.3) PRESS pusher “C” to advance hour.4) PRESS pusher “A” to set tens of minutes.5) PRESS pusher “C” to advance tens of minutes.6) PRESS pusher “A” and “C” as a...
Page 11 - TO USE CHRONOGRAPH FOR LAP OR SPLIT; TO USE CHRONOGRAPH FOR STANDARD
TO USE CHRONOGRAPH FOR LAP OR SPLIT TIME MEASUREMENT: 1) PRESS pusher “A” to bring up CHRONOGRAPH display; “CH LAP” or “CH SPL” will appear. 2) PRESS pusher “D” to select LAP or SPLIT.3) PRESS pusher “C” to start timing.4) PRESS pusher “C” to record the first Lap or Split time; digits will be frozen...
Page 13 - TO SET THE DAY
TO SET THE TIME 1) Pull crown all the way out and turn to correct time. 2) Push crown in to restart. Note: 24-hour display will set automatically. TO SET THE DATE Instant date change:1) Pull crown out one stop and turn CLOCKWISE until you reach correct date. 2) Push crown in to restart. 19 ENGLISH M...
Page 14 - Remember to set time for am or pm (sun or
NOTE: Remember to set time for am or pm (sun or moon). TO SET DATE: 1) PULL out crown to “B” position.2) TURN crown clockwise to correct date.3) PUSH in crown to “A” position TO SET DAY: 1) PULL out crown to “C” position.2) Advance time 24 hours to change the day.3) PUSH in crown to “A” position 21 ...
Page 16 - STANDARD CHRONOGRAPH; CHRONOGRAPH
NOTE: PRESSING and HOLDING either pusher “A” or “B” will cause the hands to move continually until the pusher is released. STANDARD CHRONOGRAPH MEASUREMENT: 1) PRESS pusher “A” to start timing2) PRESS pusher “A” to stop timing3) PRESS pusher “B” to reset 25 ENGLISH CHRONOGRAPH • The Chronograph is c...
Page 17 - SETTING THE TIME
SETTING THE DATE 1) PULL the crown out to the 1st position “B”.2) Turn the crown counter-clockwise to set the date. *If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day. 3) After the date has been set, push the crown back to the normal pos...
Page 18 - CHRONOGRAPH RESET; TIME MEASUREMENT
*Do not push crown to normal position while the chronograph second hand returns to zero position. It stops on the way when crown is returned to normal position and its position is recognized as zero position. 29 ENGLISH minute hand, and chronograph hour hand return to zero position. CHRONOGRAPH RESE...
Page 19 - TO ADJUST TO A NEW TIME ZONE:; BASIC OPERATIONS
TIMETO SET THE TIME: 1. PULL crown out to “C” position.2. TURN crown either way to correct time.3. PUSH crown in to “A” position. TO ADJUST TO A NEW TIME ZONE: 1. PULL crown out to “B” position.2. TURN crown either way to move the hour hand in hour increments. CALENDARTO SET THE CALENDAR: 1. PULL cr...
Page 20 - TO ADJUST CHRONOGRAPH HANDS:; BEFORE USING THE CHRONOGRAPH,
TO ADJUST CHRONOGRAPH HANDS: 1. PULL crown out to “B” position.2. PRESS pusher “B” until the hand at the 10 o’clock eye resets to the “30” position. 3. PULL crown out to “C” position.4. PRESS pusher “A” until the chronograph second hand resets to the “0” or “60” or 12-hour position. 5. PRESS pusher ...
Page 21 - minescent
NIGHT-MODE ® FEATURE TO USE NIGHT-MODE ® FEATURE: 1. PUSH and HOLD Crown to “D” position for 4 sec- onds to activate NIGHT-MODE ® feature . PRESSING any pusher will cause the INDIGLO ® night-light to stay on for 3 seconds. 2. NIGHT-MODE ® feature will last for 8 hours. 3. Or PUSH and HOLD Crown to “...
Page 22 - TO ADJUST THE STOPWATCH HANDS TO
TIMETO SET THE TIME: NOTE: The stopwatch must be stopped and reset to the zero position prior to setting the time.1. Pull the crown out to position 2.2. Rotate the crown either direction until the 24-hour, hour, and minute hands display the correct time. 3. Push Crown in to position 1. TO ADJUST THE...
Page 23 - ELAPSED TIME RING; TO TIME AN ACTIVITY FROM THE START:
ELAPSED TIME RING If your watch is equipped with a rotatable outer ring on the face, with numbers corresponding to minutes, you can use this Elapsed Time Ring to time an activity from the start, or to mark the ending time for the duration of an activity. TO TIME AN ACTIVITY FROM THE START: Set the S...
Page 24 - TO MEASURE THE TIME REMAINING:; TACHYMETER RING
If within the first minute, a distance greater than one mile or kilometer is covered, multiply the tachymeter number by the distance to get the actual rate: if you went 1.2 miles in 45 seconds, multiply the 80 by 1.2 – 96 MPH. COMPASS RING If your watch is equipped with a movable ring around the dia...
Page 25 - SLIDING CLASP BRACELET
FOLDOVER CLASP BRACELET 1. Find spring bar that con- nects bracelet to clasp. 2. Using a pointed tool, push in spring bar and gently twist bracelet to disengage. 3. Determine wrist size, then insert spring bar in correct bottom hole. 4. Push down on spring bar, align with top hole and release to loc...
Page 26 - BATTERY; DO NOT DISPOSE OF BATTERY IN FIRE. DO NOT
BATTERY Timex strongly recommends that a retailer or jeweler replace battery. If applicable, push reset button when replacing battery. Battery type is indicated on case- back. Battery life estimates are based on certain assumptions regarding usage; battery life may vary depending on actual usage. DO...
