Timex 111-095009 - Manual - manualsarea.com

Page 3 - Congratulations on purchasing your TIMEX

TIMEX ® WATCHES Congratulations on purchasing your TIMEX ® watch. Please read these instructions carefully to understand how to operate your Timex timepiece.Your watch may not have all of the features described in this booklet. For more information, please visit: www.timex.com W217_NA_EN_analoglayou...

Page 5 - Water-Resistance Depth

WATER AND SHOCK RESISTANCE If your watch is water-resistant, meter marking (WR_M) is indicated. *pounds per square inch absolute WARNING: TO MAINTAIN WATER-RESISTANCE,DO NOT PRESS ANY BUTTONS OR PULL OUT THE CROWN UNDER WATER UNLESS YOURWATCH IS INDICATED AS 200 METER WATER-RESISTANT. 3 E N G L I S ...

Page 6 - DATE MODELS; E N G L I S H

DATE MODELS TO SET TIME: 1) PULL crown all the way out and turn to correct time. 2) Push crown in to restart. For screw-in setting crown, push crown in while turning CLOCKWISE to tighten. Watches with date: Note correct time of day (A.M or P.M.) for proper date function. TO SET DAY: 1) PULL crown to...

Page 7 - TO SET “QUICK DATE

DAY / DATE MODELS TO SET THE TIME: 1) PULL the crown out to the “C” position. 2) TURN the crown either way to the correct time. 3) PUSH in the crown to the “A” position. TO SET THE DATE: 1) PULL the crown out to the “B” position. 2) TURN the crown either way to the correct date.3) PUSH in the crown ...

Page 8 - EASY SET ALARM SETTINGS

EASY SET ALARM DATE & TIME SETTINGSTO SET THE DATE: 1) With the TIMEKEEPING CROWN in the “B” position TURN the TIMEKEEPING CROWN or TURNING RING in either direction to set the date. TO SET THE TIME: 1) With the TIMEKEEPING CROWN in the “C” position TURN the TIMEKEEPING CROWN or TURNING RING in e...

Page 9 - TO SET THE HOURLY ALARM:

TO SET THE HOURLY ALARM: 1) With the ALARM CROWN in the “D” position, TURN the ALARM CROWN or TURNING RING in either direction to set the minute alarm marker. 2) To activate the alarm to ring or vibrate at the desired minute, PULL the ALARM CROWN out to the “F” position. Three beeps sound and flash ...

Page 10 - TO SET TIME

TO SET TIME To set time, simply pull crown all the way out and turn. Day and date change automatically when time is adjusted past midnight; there is no additional step for setting day or date. Push crown in when done.After setting, if date changes at noon, time needs to be adjusted ahead or back 12 ...

Page 11 - ELAPSED TIME RING; TO TIME AN ACTIVITY FROM THE START:

ELAPSED TIME RING If your watch is equipped with a rotatable outer ring on the face, with numbers corresponding to minutes, you can use this Elapsed Time Ring to time an activity from the start, or to mark the ending time for the duration of an activity. TO TIME AN ACTIVITY FROM THE START: Set the S...

Page 12 - TO MEASURE THE TIME REMAINING:

TACHYMETER RING The tachymeter feature can be used to measure speed in miles per hour (MPH), nautical miles per hour (knots) or kilometers per hour (KPH) using the sweep second hand and the scale on the wall above the watch face. You need to know the actual distance you are covering in miles or km.S...

Page 13 - HOW TO ADJUST BRACELET; SLIDING CLASP BRACELET

HOW TO ADJUST BRACELET (Variations of the following bracelet sections apply to all watch models). SLIDING CLASP BRACELET 1 Open locking plate.2. Move clasp to desired bracelet length.3. Exert pressure while holding locking plate and slide clasp back and forth until it engages in grooves on under- si...

Timex 111-095009 - Manual

Table of Contents:

Summary

Other Timex Models