Page 3 - CHAPTER 1; INTRODUCTION
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 3 CHAPTER 1 INTRODUCTION What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Web interface
Page 4 - Disclaimer
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 4 Intellectual Property Rights This User Guide and the Products to which it pertains contain information that is proprietary to TANDBERG and its licensors. Information regarding the Products is found in the Administrator guide for this product, w...
Page 8 - CHAPTER 2; CONNECTING THE EX90
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 8 CHAPTER 2 CONNECTING THE EX90 What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Web interface
Page 9 - Connecting the TANDBERG EX90; Connecting for use as PC screen; Connecting
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 9 Connecting the TANDBERG EX90 Connect the cables as shown. Sockets are located behind the rear cover. If you have one LAN connection only—and need that for your PC—the TANDBERG EX90 has a built in Gigabit ethernet switch that enables you to conn...
Page 11 - CHAPTER 3; USING THE EX90
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 11 CHAPTER 3 USING THE EX90 What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Web interface
Page 13 - inTouch controller—initial view
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 13 inTouch controller—initial view System setup Do not disturb Microphone mute (on/off) Volume Selfview (what others see from your video system—the outgoing video) Select between handset, headset and speaker Information bar Numeric keypad or alph...
Page 14 - Initial settings—before you begin
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 14 Tap Selfview to see what others will see of you. Tilt the camera to obtain the best view. The best view wil be the view that positions your face as high up on the screen as possible without cutting off the top of your head. If you need to adju...
Page 15 - Calling someone by dialing
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 15 Calling someone by dialing Tap Dial pad . Use the numeric keypad for numbers, or use the keyboard mode. If you need to key in digits or special characters, press and hold the key until the character appears. Tap abc to change to keyboard and 1...
Page 16 - Calling someone using Recent calls
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 16 Calling someone using Recent calls Recent calls is a list of placed, missed and received calls since the last time you cleared the list. Calls placed Calls received Calls missed Tap Recent calls to display the list of recent calls. Scroll by d...
Page 17 - Calling someone using My contacts
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 17 Calling someone using My contacts Tap My contacts to display your personal phone book. Scroll by dragging up or down anywhere in the list. Tap the entry to be called. This will cause the Call button to appear. Tap to display the context sensit...
Page 18 - Calling someone using the Phone book
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 18 Calling someone using the Phone book Tap Phone book to display the corporate phone book. Phone books may have subfolders. Tap a subfolder to display its contents. Scroll by dragging up or down anywhere in these lists. Tap the entry you want to...
Page 19 - Search the Phone book, then call
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 19 Search the Phone book, then call Tap Phone book to display the corporate phone book. Tap in the search field to start searching for an entry. The keyboard will now appear. Start keying in the entry. Matches will appear as you write. Tap Call t...
Page 22 - Call transfer
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 22 To put one of the participants on hold, tap that participant. A menu will appear next to that person allowing you to put him or her on hold. To put both on hold, tap Hold (next to the red Terminate call button), as outlined. Tap Swap to swap t...
Page 23 - Far end camera control
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 23 Calling another (optional feature) Calling another (optional feature) Receiving calls Receiving another call while already in a call Tap Accept to accept the incoming call or Reject to reject it. If you already are in a call and someone else c...
Page 24 - CHAPTER 4; THE SETTINGS—USING INTOUCH
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 24 CHAPTER 4 THE SETTINGS—USING INTOUCH The TANDBERG EX90 can be configured via the inTouch controller or via its web interface. For full access to all configurable parameters the web interface must be used—the inTouch controller provides access ...
Page 25 - Setting the TANDBERG EX90 in standby
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 25 Outside a call, you may have the unit enter standby mode by touching the Power button on the main unit (the screen). The Standby dialog is displayed and the unit enters standby immediately. This does not work when you are in a call. Outside a ...
Page 26 - Entering the Settings menus
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 26 Entering the Settings menus Tap Setup . Tap Settings to gain access to the Settings . Select the tab required by tapping on it. Tap a field to enter the corresponding settings. If both DVI and HDMI are connected to external sources, a Source b...
Page 27 - Call settings
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 27 Call settings The Call settings let you define whether your EX90 shall respond automatically to incoming calls or not. If you set it to Auto answer On , you may specify a delay from the moment an incoming call appears until the unit responds. ...
Page 29 - Ringtone & sound settings
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 29 Ringtone & sound settings The Ringtone & sound settings let you specify: • Audible tones when tapping keys on or off. • The ringtone volume. • The type of ringtone. Tap a ringtone to hear what it sounds like. What’s in this Guide? Intr...
Page 30 - Display settings
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 30 Display settings The Display settings let you adjust: • Preferred brightness by moving the Brightness slider. • The color balance. There are four preset color settings ( Cold , Neutral , Warm and your own ( Custom )) available. When you select...
Page 31 - Camera control & settings
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 31 Camera control & settings The Camera control & settings let you specify: • The Whitebalance setting. • The Exposure setting. • Whether Backlight compensation shall be activated or not. Backlight compensation is used to avoid that you a...
Page 34 - SIP settings
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 34 SIP settings The SIP settings let you specify: • Your URI . • The Default transport layer, this can be set to TCP , UDP , TLS or Auto . • The proxy type can be set to Standard, Alcatel, Avaya, TANDBERG, Microsoft, Nortel, Experimental, Siemens...
Page 35 - System information
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 35 System information The System information provides all the system information at a glance. Scroll down to also see status on video inputs (DVI and HDMI). What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Web interface
Page 36 - Call status
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 36 Call status The Call status provides all the call status information at a glance. What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Web interface
Page 37 - CHAPTER 5; THE WEB INTERFACE
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 37 CHAPTER 5 THE WEB INTERFACE What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Web interface
Page 38 - Entering the web interface
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 38 Entering the web interface Key in the IP address of your TANDBERG EX90 in your browser to access its web interface. System information page is accessed here. This is the “Home page” of your video system. The advanced configuration is accessed ...
