Page 2 - Trademarks and Copyright
We recommend that you check out the TANDBERG web site regularly for updated versions of this manual: http://www.tandberg.net/suppor t/documentation.php All rights reserved. This document contains information that is proprietary to TANDBERG. No part of this publication may be reproduced, stored in a ...
Page 3 - Disclaimer & License Agreements
We recommend that you check out the TANDBERG web site regularly for updated versions of this manual: http://www.tandberg.net/suppor t/documentation.php The information in this document is furnished for informational purposes only, is subject to change without prior notice, and should not be construe...
Page 4 - Disclaimer & License Agreements, Patent Information
D 13954.01JUNE 2006 TANDBERG 1700 MXP USER GUIDE Disclaimer The information in this document is furnished for informational pur-poses only, is subject to change without prior notice, and should not be construed as a commitment by TANDBERG.TANDBERG reserves the right to amend any of the information g...
Page 5 - Operator Safety / Environmental Issues
We recommend that you check out the TANDBERG web site regularly for updated versions of this manual: http://www.tandberg.net/suppor t/documentation.php For your own protection, please read the overleaf safety instructions completely, before operating the equipment and keep this manual for future ref...
Page 6 - Safety Instructions
For your protection please read these safety instructions completely before you connect the equipment to the power source. Carefully observe all warnings, precautions and instruc-tions both on the apparatus and in these operating instructions. Retain this manual for future reference. Water and Moist...
Page 7 - Environmental Issues
D 13954.01JUNE 2006 7 TANDBERG 1700 MXP USER GUIDE Thank you for buying a product which contributes to a reduc-tion in pollution, and thereby helps save the environment. Our products reduce the need for travel and transport and thereby reduce pollution. Our products have either none or few consum-ab...
Page 8 - Finding the Information You Need
We recommend that you check out the TANDBERG web site regularly for updated versions of this manual: http://www.tandberg.net/suppor t/documentation.php Thank you for choosing TANDBERG! The TANDBERG 1700 MXP has been designed to provide you with many years of safe, reliable operation.Your approach to...
Page 9 - What’s in this
D 13954.01JUNE 2006 Disclaimer & License Agreements Disclaimer & License Agreements, Patent Information ........... 4 Disclaimer .................................................................... 4License Agreements ...................................................... 4Agfa ................
Page 12 - Getting Acquainted with the System
We recommend that you check out the TANDBERG web site regularly for updated versions of this manual: http://www.tandberg.net/suppor t/documentation.php Getting Acquainted with the System Before you start using the system we recommend that you take your time to read through this section of the User G...
Page 13 - Preparing for Use
D 13954.01JUNE 2006 13 TANDBERG 1700 MXP USER GUIDE Preparing for Use Getting Acquainted with the System Tilt the camera manually to make it point at you. The Lens Cap is held in place by a magnet. Headset toggle button Headset out Headset microphone For more on the use of headset and microphone, se...
Page 15 - Operating Principles
D 13954.01JUNE 2006 15 TANDBERG 1700 MXP USER GUIDE Use the horizontal Arrow keys to navigate in the menu line and press OK to enter a submenu. Operating Principles Getting Acquainted with the System Basic Menu Navigation Rules Pick up the remote control to wake up the system or press OK to disp...
Page 16 - Camera Adjustments
D 13954.01JUNE 2006 1 TANDBERG 1700 MXP USER GUIDE Camera Adjustments Getting Acquainted with the System About Camera Adjustments The focus of the camera is adjusted manu-ally by rotating the ring as pointed out in Preparing for Use . The camera can be tilted manually as explained on the same page. ...
Page 17 - The icons Appearing on the Screen
D 13954.01JUNE 2006 17 TANDBERG 1700 MXP USER GUIDE Secure Conference, AES This double padlock indicator is shown when AES encryption (Secure Conference) is active. Secure Conference, DES This padlock indicator is shown when DES encryption (Secure Conference) is active. Not Secure Conference This op...
Page 19 - Screen Layout
D 13954.01JUNE 2006 1 TANDBERG 1700 MXP USER GUIDE About Screen Layout The layout of the screen can either be shown as Picture In Picture ( PIP ) or Picture Outside Picture (POP) when displaying more than one video image. For widescreen moni-tors, POP is recommended. The behavior of the Layout key d...
Page 20 - Local PC Display
D 13954.01JUNE 2006 20 TANDBERG 1700 MXP USER GUIDE Local PC Display Getting Acquainted with the System Touch tones Snapshot Camera Presets Touch tones Snapshot Camera Presets Touch tones Snapshot Camera Presets Near end video Far end video You are using the monitor as a PC monitor. You accept an in...
Page 23 - Standby
D 13954.01JUNE 2006 23 TANDBERG 1700 MXP USER GUIDE Navigate to the Standby now icon and click OK . Press OK and navigate to the Standby icon. Select Standby from the menu and click OK . Standby Getting Acquainted with the System About Standby The system will automatically go to Standby Mode whe...
Page 24 - Call Handling
We recommend that you check out the TANDBERG web site regularly for updated versions of this manual: http://www.tandberg.net/suppor t/documentation.php Call Handling Your TANDBERG 1700 MXP can do point-to-point video and telephone calls as well as video conferences with up to 4 video calls and 3 tel...
Page 25 - Access Codes
D 13954.01JUNE 2006 25 TANDBERG 1700 MXP USER GUIDE Access Codes About Access Codes Your TANDBERG system may, or may not, be set up to require Access Codes to be typed in before a call can be made.Access Codes are used for two things; call restrictions and billing opportunities. Call restrictions ma...
Page 27 - Making Point-to-Point Calls Using the Phone Book
D 13954.01JUNE 2006 27 TANDBERG 1700 MXP USER GUIDE Select Make a Call from the menu, or, press the green Call key on the remote control. Use the Cursor keys to navigate to the Phone Book icon and press OK on the remote control, or just press the Phone Book button on the remote control. Use th...
Page 30 - MultiSite Conferences – Adding Calls
D 13954.01JUNE 2006 30 TANDBERG 1700 MXP USER GUIDE MultiSite Conferences – Adding Calls Call Handling About MultiSite Conferences Conference systems with built-in MultiSite can han-dle up to 4 IP video calls and 3 IP telephone calls simultaneously.You may set up a video meeting with many par-ticipa...
Page 31 - Altering the Call Settings
D 13954.01JUNE 2006 31 TANDBERG 1700 MXP USER GUIDE Set the Call Settings as required. If you want the new settings to be used as the new Default Call Settings, select Set Default and press OK . These settings will now be the default settings for all future manually dialled calls. Otherwise, jus...
Page 32 - Streaming
D 13954.01JUNE 2006 32 TANDBERG 1700 MXP USER GUIDE Streaming Call Handling About Streaming Streaming lets you broadcast your meeting to participants on the web. The web participants can view the meeting, listen to the meeting, see snapshots, but not participate themselves. Snapshots of current stre...
Page 33 - Answering an Incoming Call
D 13954.01JUNE 2006 33 TANDBERG 1700 MXP USER GUIDE Answering an Incoming Call Call Handling Press the OK button on the remote control. Press the the green Call button on the remote control. •• Accept the incoming call Reject the incoming call This will not apply if Do Not Disturb has been activated...
Page 34 - Ending an Ongoing Call
D 13954.01JUNE 2006 3 TANDBERG 1700 MXP USER GUIDE Ending a Point-to-Point Call Ending a MultiSite Call Ending an Ongoing Call Call Handling Use either of the below methods: Press the End Call button ( Touch tones Snapshot Presets ) on the remote control. Press the OK/Menu button on the remote con...
Page 35 - Basic Phone Book Features
D 13954.01JUNE 2006 35 TANDBERG 1700 MXP USER GUIDE Basic Phone Book Features The Call Log – listing Placed Calls Missed Calls Received Calls is essentially a set of lists of your system’s call history. The lists contain the most recent numbers placed, missed, and received, limited to a maximum of 3...
Page 36 - Searching in the Phone Book
D 13954.01JUNE 2006 3 TANDBERG 1700 MXP USER GUIDE About Searching in the Phone Book The My Contacts may contain up to 200 en- tries and the entire Phone Book (which may include server based Global Directories) can be virtually unlimited in size. Hence, using the Arrow keys as the only navigation de...
Page 37 - Adding New Contacts to the Phone Book
D 13954.01JUNE 2006 37 TANDBERG 1700 MXP USER GUIDE Adding New Contacts to the Phone Book Adding a New Contact Manually Press the Phone Book icon to enter the Phone Book. Use the Arrow keys to navigate down to My Contacts Press OK to produce the contents of My Contacts . Use the Arrow keys t...
Page 38 - Editing Entries in the Phone Book
D 13954.01JUNE 2006 38 TANDBERG 1700 MXP USER GUIDE Editing Entries in the Phone Book Call Handling Editing a Contact in My Contacts Press the Phone Book icon to enter the Phone Book. Use the Arrow keys to navigate down to My Contacts Press OK to produce the contents of My Contacts . Use the...
Page 39 - Creating Multisite Contacts in the Phone Book
D 13954.01JUNE 2006 3 TANDBERG 1700 MXP USER GUIDE Bandwidth for a MultiSite Contact Call When calling a MultiSite Contact, the system will try to call the participants with their speci-fied bandwidths. If the total bandwidth exceeds the system’s maximum bandwidth, the system will downspeed and dist...
Page 40 - Editing Multisite Contacts in the Phone Book
D 13954.01JUNE 2006 0 TANDBERG 1700 MXP USER GUIDE Editing Multisite Contacts in the Phone Book Call Handling Viewing the Participants in a MultiSite Contact Press the Phone Book key to enter the Phone Book. Use the Arrow keys to navigate down to My Contacts Press OK to produce the contents of...
Page 41 - Video Meeting Features
Video Meeting Features Your TANDBERG 1700 MXP can do point-to-point video and telephone calls as well as video conferences with up to 4 video calls and 3 telephone calls (the latter is called MultiSite). Some system features apply to point-to-point calls only, others apply to video conferences only,...
Page 42 - Features Overview
D 13954.01JUNE 2006 2 TANDBERG 1700 MXP USER GUIDE Features Overview Video Meeting Features This section of the User Guide outlines features available during a video call. Main emphasis has been put on features avail-able in point-to-point calls only (as opposed to video conference calls – also call...
Page 43 - Far End Camera Control – Pan, Tilt and Zoom
D 13954.01JUNE 2006 3 TANDBERG 1700 MXP USER GUIDE Far End Camera Control – Pan, Tilt and Zoom Video Meeting Features About Far End Camera Control This is a feature that lets you pan, tilt, and zoom the far end camera. If far end presets* are available you may access these as well, and you may also ...
Page 44 - Far End Camera Control – Using Far End Camera Presets
D 13954.01JUNE 2006 TANDBERG 1700 MXP USER GUIDE Far End Camera Control – Using Far End Camera Presets Video Meeting Features About Camera Presets The far end may use camera presets to easily vary be-tween predefined camera angles in their own end. Thus they eliminate the need to move their camera a...
Page 45 - Presentation
D 13954.01JUNE 2006 5 TANDBERG 1700 MXP USER GUIDE Presentation Video Meeting Features About Presentation The Presentation Functionality in the system enables you to show other available video sources in addition to your Main Cam-era. This is perfect for meetings where you would like to show a Power...
Page 46 - Dual Video Stream
D 13954.01JUNE 2006 TANDBERG 1700 MXP USER GUIDE Dual Video Stream Video Meeting Features About Dual Video Stream With Dual Stream (optional) you have the opportunity to show two different live video streams simultaneously, main video and one additional source. This is handy when showing a presentat...
Page 47 - Snapshots
D 13954.01JUNE 2006 7 TANDBERG 1700 MXP USER GUIDE Snapshots Video Meeting Features About Snapshots The system can take a snapshot of your live video. Snapshot is handy when you are in a call with a system that does not support Dual Video Stream . Use Snapshot to show a snapshot of your presentation...
Page 48 - Gaining Access to the Far End Video Sources
D 13954.01JUNE 2006 8 TANDBERG 1700 MXP USER GUIDE Gaining Access to the Far End Video Sources Video Meeting Features About Far End Video Sources In point-to-point video meetings your system may be con-nected to a system with several inputs for various video sources. You may get access to these by m...
Page 49 - Text Chat
D 13954.01JUNE 2006 TANDBERG 1700 MXP USER GUIDE In a call click OK to display the menu and navigate to Services . Click OK and navigate to Text Chat . Press OK and start your text chatting by pressing the keys on the remote control. Press OK to end the chat and return to the Services menu. ...
Page 50 - MultiSite Features
We recommend that you check out the TANDBERG web site regularly for updated versions of this manual: http://www.tandberg.net/suppor t/documentation.php The TANDBERG 1700 MXP can handle up to 4 IP video calls and 3 IP telephone calls simultaneously. To be able to do this, the 1700 MXP has a built-in ...
Page 51 - Video Meetings with Several Participants – an Overview
D 13954.01JUNE 2006 51 TANDBERG 1700 MXP USER GUIDE Layout When you are the host of a MultiSite video meeting, you have control of the main conference image layout. The layout chosen by you is transmitted to the other participants as a single image and its layout cannot be changed by them. However, ...
Page 52 - Request and Release Floor
D 13954.01JUNE 2006 52 TANDBERG 1700 MXP USER GUIDE In a MultiSite call (a video meeting) click OK to display the menu and navigate to Services . Request and Release Floor Click OK to enter the submenu and navigate to Request Floor . Click OK to have your video broadcasted as the large picture...
Page 53 - Assign Floor
D 13954.01JUNE 2006 53 TANDBERG 1700 MXP USER GUIDE In a MultiSite call (a video meeting) click OK to display the menu and navigate to Services . Assign Floor Click OK to enter the submenu and navigate to Assign Floor . Click OK to display a list of the meeting participants. Navigate to the pe...
Page 56 - Control Panel
We recommend that you check out the TANDBERG web site regularly for updated versions of this manual: http://www.tandberg.net/suppor t/documentation.php Control Panel In order to provide you with the expected high level of TANDBERG video conferencing quality, the unit needs to be configured properly....
Page 57 - The Remote Control
D 13954.01MAY 2006 57 TANDBERG 1700 MXP USER GUIDE Control Panel Settings The Remote Control PRESENTATION KEY switches to a predefined presentation source. If the Presentation key is held down for 1 second then the Presentation video sources menu will appear. ARROW KEYS are used to navigate in the m...
Page 58 - An Overview of the Control Panel
D 13954.01MAY 2006 58 TANDBERG 1700 MXP USER GUIDE Back Restart (the system switches itself OFF and ON again) Audio Demo (discussed in Diagnostics at the end of this section) Diagnostics (discussed in Diagnostics at the end of this section) On-line User Guide (discussed in Diagnostics at the end of ...
Page 59 - An Overview of the Control Panel Settings
D 13954.01MAY 2006 5 TANDBERG 1700 MXP USER GUIDE An Overview of the Control Panel Settings Control Panel General Settings Menu Settings Presentation Settings Video Settings Restore Default Settings Audio Settings Network Settings Security Settings Call Quality Settings
Page 60 - Password Protection of the Control Panel Settings
D 13954.01MAY 2006 0 TANDBERG 1700 MXP USER GUIDE Password Protection of the Control Panel Settings Control Panel Set a Password Password Protection All settings of the Control Panel may be password protected by a pin code consist-ing of up to five digits. Whenever you click the Settings icon in the...
Page 61 - General Settings – an Overview
D 13954.01MAY 2006 1 TANDBERG 1700 MXP USER GUIDE LOST IN TRANSLATION? Click on the Phone Book icon 5 times followed by pressing the number key 1 on the remote control to reset the menu language to English. Press OK to produce the below menu. Use the Arrow keys to move to the Control Panel . P...
Page 62 - Language
D 13954.01MAY 2006 2 TANDBERG 1700 MXP USER GUIDE Language Control Panel > General Settings Tip! When the Input Editor Language is set to Chinese, Korean or Japanese you will be able to enter Chinese / Korean / Japanese characters into an input field like the System Name or Phone Book, using the ...
Page 63 - System Name Settings
D 13954.01MAY 2006 3 TANDBERG 1700 MXP USER GUIDE System Name Settings Control Panel > General Settings Touch tones Snapshot Presets Touch tones Snapshot Presets SYSTEM NAME Identifies the system: On the welcome screen of your systemDuring an MCU conference callWhen using the Web-interfaceWhen th...
Page 64 - Autoanswer
D 13954.01MAY 2006 TANDBERG 1700 MXP USER GUIDE Autoanswer Control Panel > General Settings AUTOANSWER The autoanswer setting determines whether an incoming call is put through automatically or manually. On . The system will automatically answer all incoming calls. On+Mic Off . The system will au...
Page 65 - Phone Book Settings
D 13954.01MAY 2006 5 TANDBERG 1700 MXP USER GUIDE Phone Book Settings Control Panel > General Settings What is Corporate Directory? Your system may be connected to a Directory Service or Management System such as the TANDBERG Management Suite (TMS). The Management System may then provide your vid...
Page 66 - External Services
D 13954.01MAY 2006 TANDBERG 1700 MXP USER GUIDE External Services Control Panel > General Settings EXTERNAL SERVICESOn Set this to On when External Services are available. Off Set this to Off when External Services are unavailable. IP ADDRESS Enter the IP address or DNS name of the Service Provid...
Page 67 - Permissions
D 13954.01MAY 2006 7 TANDBERG 1700 MXP USER GUIDE Permissions Control Panel > General Settings WHAT IS MCU? MCU is short for Multipoint Conference Unit, a device used to connect multiple audio and video sites in one or more ISDN, IP and mixed ISDN and IP video meetings. ACCESS CODE An access code...
Page 70 - Software Options
D 13954.01MAY 2006 70 TANDBERG 1700 MXP USER GUIDE Software Options Control Panel > General Settings The system requires a valid option key to activate MultiSite and/or Presenter functionality. In order to activate additional bandwidth, you need to enter a bandwidth key. A restart of the system i...
Page 71 - Date and Time Settings
D 13954.01MAY 2006 71 TANDBERG 1700 MXP USER GUIDE Date and Time Settings Control Panel > General Settings NTP IP This is the NTP time server address from which the system can get updated time information. See IP Services for more details. Auto. The NTP IP address is set automatically. Manual. Th...
Page 73 - Kiosk Mode Settings
D 13954.01MAY 2006 73 TANDBERG 1700 MXP USER GUIDE Kiosk Mode Settings Control Panel > Menu Settings CANCEL Select this icon and press OK to leave the menu undoing any changes. RESTORE DEFAULTS Select this icon and press OK to restore the default settings. SAVE Select this icon and press OK to le...
Page 74 - Startup Settings
D 13954.01MAY 2006 7 TANDBERG 1700 MXP USER GUIDE Startup Settings Control Panel > Menu Settings WELCOME MENU The Welcome Menu contains the Main Menu, System Status, your System Name and dial-in numbers. Set to ON to produce the Welcome Menu when the system wakes up from standby mode.Set to OFF t...
Page 76 - Presentation Settings – an Overview
D 13954.01MAY 2006 7 TANDBERG 1700 MXP USER GUIDE Presentation Settings – an Overview Control Panel > Presentation Settings LOST IN TRANSLATION? Click on the Phone Book icon 5 times followed by pressing the number key 1 on the remote control to reset the menu language to English. Press OK to pr...
Page 77 - Presentation Start / H23 Enabling
D 13954.01MAY 2006 77 TANDBERG 1700 MXP USER GUIDE Presentation Start / H23 Enabling Control Panel > Presentation Settings CANCEL Select this icon and press OK to leave the menu undoing any changes. RESTORE DEFAULTS Select this icon and press OK to restore the default settings. SAVE Select this i...
Page 78 - Call Video Source
D 13954.01MAY 2006 78 TANDBERG 1700 MXP USER GUIDE Call Video Source Control Panel > Presentation Settings CANCEL Select this icon and press OK to leave the menu undoing any changes. RESTORE DEFAULTS Select this icon and press OK to restore the default settings. SAVE Select this icon and press OK...
Page 79 - Presentation Source
D 13954.01MAY 2006 7 TANDBERG 1700 MXP USER GUIDE Presentation Source Control Panel > Presentation Settings CANCEL Select this icon and press OK to leave the menu undoing any changes. RESTORE DEFAULTS Select this icon and press OK to restore the default settings. SAVE Select this icon and press O...
Page 80 - Snapshot Source
D 13954.01MAY 2006 80 TANDBERG 1700 MXP USER GUIDE Snapshot Source Control Panel > Presentation Settings CANCEL Select this icon and press OK to leave the menu undoing any changes. RESTORE DEFAULTS Select this icon and press OK to restore the default settings. SAVE Select this icon and press OK t...
Page 81 - Auto-Display Snapshot
D 13954.01MAY 2006 81 TANDBERG 1700 MXP USER GUIDE Auto-Display Snapshot Control Panel > Presentation Settings CANCEL Select this icon and press OK to leave the menu undoing any changes. RESTORE DEFAULTS Select this icon and press OK to restore the default settings. SAVE Select this icon and pres...
Page 82 - PIP Placing
D 13954.01MAY 2006 82 TANDBERG 1700 MXP USER GUIDE PIP Placing Control Panel > Presentation Settings CANCEL Select this icon and press OK to leave the menu undoing any changes. RESTORE DEFAULTS Select this icon and press OK to restore the default settings. SAVE Select this icon and press OK to le...
Page 83 - VNC Settings
D 13954.01MAY 2006 83 TANDBERG 1700 MXP USER GUIDE VNC Settings Control Panel > Presentation Settings CANCEL Select this icon and press OK to leave the menu undoing any changes. RESTORE DEFAULTS Select this icon and press OK to restore the default settings. SAVE Select this icon and press OK to l...
Page 84 - PC SoftPresenter and VNC
D 13954.01MAY 2006 8 TANDBERG 1700 MXP USER GUIDE PC SoftPresenter and VNC Control Panel > Presentation Settings About PC SoftPresenter PC SoftPresenter is used to display PC images on your sys-tem without using a VGA cable (PC Presenter). The system and your PC must be connected to the same LAN....
Page 85 - Call Quality Settings – an Overview
D 13954.01MAY 2006 85 TANDBERG 1700 MXP USER GUIDE Call Quality Settings – an Overview Control Panel > Call Quality Settings LOST IN TRANSLATION? Click on the Phone Book icon 5 times followed by pressing the number key 1 on the remote control to reset the menu language to English. AAC-LD 128 Spec...
Page 86 - Video Algorithm
D 13954.01MAY 2006 8 TANDBERG 1700 MXP USER GUIDE Video Algorithm Control Panel > Call Quality Settings CANCEL Select this icon and press OK to leave the menu undoing any changes. RESTORE DEFAULTS Select this icon and press OK to restore the default settings. SAVE Select this icon and press OK to...
Page 87 - Audio Algorithm
D 13954.01MAY 2006 87 TANDBERG 1700 MXP USER GUIDE Audio Algorithm Control Panel > Call Quality Settings CANCEL Select this icon and press OK to leave the menu undoing any changes. RESTORE DEFAULTS Select this icon and press OK to restore the default settings. SAVE Select this icon and press OK t...
Page 89 - Natural Video
D 13954.01MAY 2006 8 TANDBERG 1700 MXP USER GUIDE Natural Video Control Panel > Call Quality Settings CANCEL Select this icon and press OK to leave the menu undoing any changes. RESTORE DEFAULTS Select this icon and press OK to restore the default settings. SAVE Select this icon and press OK to l...
Page 91 - Video Quality
D 13954.01MAY 2006 1 TANDBERG 1700 MXP USER GUIDE Video Quality Control Panel > Call Quality Settings CANCEL Select this icon and press OK to leave the menu undoing any changes. RESTORE DEFAULTS Select this icon and press OK to restore the default settings. SAVE Select this icon and press OK to l...
Page 92 - About Intelligent Video Management (IVM) on TANDBERG Systems
D 13954.01MAY 2006 2 TANDBERG 1700 MXP USER GUIDE About Intelligent Video Management (IVM) on TANDBERG Systems Control Panel > Call Quality Settings > Video Quality IVM Resolution The below table shows the relationship between Transmission modes selected by the system when Motion or Sharpness ...
Page 93 - Default Call Settings – an Overview
D 13954.01MAY 2006 3 TANDBERG 1700 MXP USER GUIDE Default Call Settings – an Overview Control Panel > Call Quality Settings CANCEL Select this icon and press OK to leave the menu undoing any changes. RESTORE DEFAULTS Select this icon and press OK to restore the default settings. SAVE Select this ...
Page 94 - Default Video Call Settings
D 13954.01MAY 2006 TANDBERG 1700 MXP USER GUIDE Default Video Call Settings Control Panel > Call Quality Settings > Default Call Settings CANCEL Select this icon and press OK to leave the menu undoing any changes. RESTORE DEFAULTS Select this icon and press OK to restore the default settings. ...
Page 95 - Default Net Settings
D 13954.01MAY 2006 5 TANDBERG 1700 MXP USER GUIDE Default Net Settings Control Panel > Call Quality Settings > Default Call Settings CANCEL Select this icon and press OK to leave the menu undoing any changes. RESTORE DEFAULTS Select this icon and press OK to restore the default settings. SAVE ...
Page 96 - Default Bandwidth Settings
D 13954.01MAY 2006 TANDBERG 1700 MXP USER GUIDE Default Bandwidth Settings Control Panel > Call Quality Settings > Default Call Settings CANCEL Select this icon and press OK to leave the menu undoing any changes. RESTORE DEFAULTS Select this icon and press OK to restore the default settings. S...
Page 97 - Audio Settings – an Overview
D 13954.01MAY 2006 7 TANDBERG 1700 MXP USER GUIDE Audio Settings – an Overview Control Panel > Audio Settings LOST IN TRANSLATION? Click on the Phone Book icon 5 times followed by pressing the number key 1 on the remote control to reset the menu language to English. Press OK to produce the belo...
Page 99 - Alert Tones & Volumes
D 13954.01MAY 2006 TANDBERG 1700 MXP USER GUIDE Alert Tones & Volumes Control Panel > Audio Settings Use the vertical Arrow keys to move up and down in the Alert tone list. Press OK to listen to the alert tone selected. To stop playing the alert tone, use the vertical Arrow keys to move away ...
Page 100 - Graphical View of Settings
D 13954.01MAY 2006 100 TANDBERG 1700 MXP USER GUIDE Graphical View of Settings Control Panel > Audio Settings Ever wondered how things are connected in your system? The Graphical View is a matrix showing what is connected to what, and by playing test tones you will be able to verify that the con-...
Page 101 - Video Settings – an Overview
D 13954.01MAY 2006 101 TANDBERG 1700 MXP USER GUIDE Video Settings – an Overview Control Panel > Video Settings LOST IN TRANSLATION? Click on the Phone Book icon 5 times followed by pressing the number key 1 on the remote control to reset the menu language to English. Press OK to produce the be...
Page 102 - MCU Status Line
D 13954.01MAY 2006 102 TANDBERG 1700 MXP USER GUIDE MCU Status Line Control Panel > Video Settings CANCEL Select this icon and press OK to leave the menu undoing any changes. RESTORE DEFAULTS Select this icon and press OK to restore the default settings. SAVE Select this icon and press OK to leav...
Page 105 - MultiSite Picture Mode
D 13954.01MAY 2006 105 TANDBERG 1700 MXP USER GUIDE MultiSite Picture Mode Control Panel > Video Settings CANCEL Select this icon and press OK to leave the menu undoing any changes. RESTORE DEFAULTS Select this icon and press OK to restore the default settings. SAVE Select this icon and press OK ...
Page 106 - Video Name
D 13954.01MAY 2006 10 TANDBERG 1700 MXP USER GUIDE Video Name Control Panel > Video Settings CANCEL Select this icon and press OK to leave the menu undoing any changes. RESTORE DEFAULTS Select this icon and press OK to restore the default settings. SAVE Select this icon and press OK to leave the ...
Page 107 - Security Settings – an Overview
D 13954.01MAY 2006 107 TANDBERG 1700 MXP USER GUIDE Security Settings – an Overview Control Panel > Security Settings LOST IN TRANSLATION? Click on the Phone Book icon 5 times followed by pressing the number key 1 on the remote control to reset the menu language to English. Press OK to produce ...
Page 108 - Encryption
D 13954.01MAY 2006 108 TANDBERG 1700 MXP USER GUIDE Encryption Control Panel > Security Settings CANCEL Select this icon and press OK to leave the menu undoing any changes. RESTORE DEFAULTS Select this icon and press OK to restore the default settings. SAVE Select this icon and press OK to leave ...
Page 109 - Network Settings – an Overview
D 13954.01MAY 2006 10 TANDBERG 1700 MXP USER GUIDE Network Settings – an Overview Control Panel > Network Settings LOST IN TRANSLATION? Click on the Phone Book icon 5 times followed by pressing the number key 1 on the remote control to reset the menu language to English. Press OK to produce the...
Page 118 - Wireless LAN Settings
D 13954.01MAY 2006 118 TANDBERG 1700 MXP USER GUIDE Wireless LAN Settings NOTE! The PC card/PCMCIA-card used must comply with the relevant regulations for such cards in the country where it is used. The unit must be supplied by power supply (AC-DC adaptor) powerbox SPN-270 -12, which complies with t...
Page 119 - SNMP Settings
D 13954.01MAY 2006 11 TANDBERG 1700 MXP USER GUIDE SNMP Settings Control Panel > Network Settings > LAN Settings Note! The SNMP Community name is case sensitive. The default password is public Touch tones Snapshot Camera Presets CANCEL Select this icon and press OK to leave the menu undoing an...
Page 122 - Quality of Service (II) – IP Presedence Video
D 13954.01MAY 2006 122 TANDBERG 1700 MXP USER GUIDE Quality of Service (II) – IP Presedence Video Control Panel > Network Settings > LAN Settings Touch tones Snapshot Camera Presets Touch tones Snapshot Camera Presets CANCEL Select this icon and press OK to leave the menu undoing any changes. ...
Page 123 - Quality of Service (III) – IP Presedence Telephony
D 13954.01MAY 2006 123 TANDBERG 1700 MXP USER GUIDE Quality of Service (III) – IP Presedence Telephony Control Panel > Network Settings > LAN Settings Touch tones Snapshot Camera Presets Touch tones Snapshot Camera Presets CANCEL Select this icon and press OK to leave the menu undoing any chan...
Page 125 - Quality of Service (V) – Diffserv Telephony
D 13954.01MAY 2006 125 TANDBERG 1700 MXP USER GUIDE Quality of Service (V) – Diffserv Telephony Control Panel > Network Settings > LAN Settings Touch tones Snapshot Camera Presets Touch tones Snapshot Camera Presets CANCEL Select this icon and press OK to leave the menu undoing any changes. RE...
Page 128 - Data Port
D 13954.01MAY 2006 128 TANDBERG 1700 MXP USER GUIDE Data Port Control Panel > Network Settings > Data Port Touch tones Snapshot Camera Presets CANCEL Select this icon and press OK to leave the menu undoing any changes. RESTORE DEFAULTS Select this icon and press OK to restore the default setti...
Page 133 - Diagnostics – an Overview
D 13954.01MAY 2006 133 TANDBERG 1700 MXP USER GUIDE GETTING TO THIS MENU LOST IN TRANSLATION? Click on the Phone Book icon 5 times followed by pressing the number key 1 on the remote control to reset the menu language to English. Press OK to produce the below menu. Use the Arrow keys to move to ...
Page 135 - Call Status
D 13954.01MAY 2006 135 TANDBERG 1700 MXP USER GUIDE Call Status Control Panel > Diagnostics CancelView Adminstrator SettingsDetailed Call StatusCall StatusOn-line User Guide CALL STATUS Comprehensive information about the call is available through the Call Status window. The menu has two columns,...
Page 136 - Detailed Call Status
D 13954.01MAY 2006 13 TANDBERG 1700 MXP USER GUIDE Control Panel > Diagnostics Detailed Call Status CancelView Adminstrator SettingsDetailed Call StatusCall StatusOn-line User Guide DETAILED CALL STATUS The detailed call status menu provides detailed information on packet loss and jitter.
Page 137 - System Selftest
D 13954.01MAY 2006 137 TANDBERG 1700 MXP USER GUIDE System Selftest Control Panel > Diagnostics SYSTEM SELFTEST The system performs a check to determine internal hardware integrity. System Selftest is useful when you want to check if your network connection is active.
Page 138 - View Adminstrator Settings
D 13954.01MAY 2006 138 TANDBERG 1700 MXP USER GUIDE ••• View Adminstrator Settings ••• Control Panel > Diagnostics Touch tones Snapshot Camera Presets ADMINSTRATOR SETTINGS This window displays all the system set-tings. Use the Arrow keys on the remote control to scroll through the list.
Page 139 - IP Address Conflict Check
D 13954.01MAY 2006 13 TANDBERG 1700 MXP USER GUIDE Control Panel > Diagnostics IP Address Conflict Check IP ADDRESS CONFLICT CHECK The system will give a warning if there is an IP conflict. Initiate this check by selecting IP Address Conflict Check .
Page 140 - Warnings
D 13954.01MAY 2006 10 TANDBERG 1700 MXP USER GUIDE Warnings Control Panel > Diagnostics WARNINGS Any warnings registered by the sys-tem will be displayed in the Warnings menu. Open a warning in the list to get more information about the warning.
Page 141 - Audio Demo
D 13954.01MAY 2006 11 TANDBERG 1700 MXP USER GUIDE Audio Demo Control Panel AUDIO DEMO A feature designed to demonstrate the high quality of the TANDBERG audio system.Click on the Audio Demo button to demonstrate the high quality of the TANDBERG audio system.
