Swisher RC14544CPKA - User Manual
Swisher RC14544CPKA Lawnmower – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – LIMITED WARRANTY
- Page 3 – SAFETY PRECAUTIONS; Thank you for choosing Swisher’s 44” Trail Cutter. Before operating; Never allow children to operate this machine.; Never assume that children will remain where you last saw them; Always look down and behind before and during backing.
- Page 4 – ASSEMBLY; Tools Required
- Page 5 – OPERATING YOUR TRAIL CUTTER; INTENDED USE
- Page 6 – STARTING THE ENGINE; “ENGAGED”; BREAKING IN YOUR CUTTER
- Page 7 – CUTTER HEIGHT ADJUSTMENT; There is approximately 4” of height adjustment.; TOW HITCH OFFSET; Turn key switch to the “OFF” position.; SUGGESTED CUTTING PRACTICES
- Page 8 – CUTTER MAINTENANCE
- Page 9 – GENERAL TROUBLESHOOTING
- Page 10 – SAFETY AND OPERATIONAL DECALS
- Page 11 – DECK LEVELING DIAGRAM; FIGURE 1; FRONT TO BACK ADJUSTMENT
- Page 12 – FRONT SKIRT ASSEMBLY; FIGURE 3; HITCH ASSEMBLY; FIGURE 4
- Page 13 – FIGURE 5
- Page 14 – Z Bracket, Jack Support; DECK ASSEMBLY; FIGURE 6
- Page 15 – BLADE DRIVER ASSEMBLY; FIGURE 7
- Page 16 – FIGURE 8; FIGURE 9; IDLER CONFIGURATION; ENGINE PULLEY/BELT ASSEMBLY
- Page 18 – Cable Tie - Carbon Canister; REPAIR PARTS; Mowers equipped with a 14.5HP engine
- Page 19 – BATTERY HOLDER CONFIGURATION; Note; lid in the open position as shown in; Lid Closed Position
- Page 20 – BCS; BATTERY CABLE ASSEMBLY; Mower not shown for Clarity
- Page 21 – Unlocked
- Page 23 – SWISHER ACQUISITION INC.; OWNER’S; CHANGING YOUR LANDSCAPE SINCE 1945
10/26/2022
COMMERCIAL PRO
44” COUNTRY CUT
TRAIL CUTTER
OWNER’S
MANUAL
SWISHER ACQUISITION INC.
1602 CORPORATE DRIVE, WARRENSBURG, MISSOURI 64093
PHONE (660) 747-8183 FAX (660) 747-8650
Assembly
Operation
Service and Adjustment
Repair Parts
www.swisherinc.com
MODEL NO.
STARTING SERIAL #:
L122-315001
RC14544CPKA
20929 REV 22-315
Read and follow all
Safety Precautions
and Instructions
before operating this
equipment
.
IMPORTANT
Read and follow all
Safety Precautions
and Instructions
before operating this
equipment
.
IMPORTANT
Made In The
USA
of US and Global Parts
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
LIMITED WARRANTY The manufacturer’s warranty to the original consumer purchaser is: This product is free from defects in materials and workmanship for the period's shown below beginning from the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts ...
SAFETY PRECAUTIONS This Safety Alert Symbol indicates important messages in this manual. When you see this symbol, carefully read the message that follows and be alert to the possibility of personal injury. Read this manual completely. This machine can amputate hands and feet, and throw objects. Fai...
• Insert 5/8-11 X 2 ½ bolt through the top of pivot assembly and top link and secure with 5/8-11 nut. Insert 5/8-11 x 2½ bolt through the tabs on the top of the Hitch bar and Top Link. Secure with a 5/8-11 lock nut. • Place 2” Hitch Coupler on the end of the Hitch Bar. Align Holes with Hitch Bar and...
