Sunbeam EM7100 - User Manual

10 Using your espresso machine continued user complete control over the length of the espresso pour.To use this operation press the MANUAL button once to start the espresso pour. The pour will start with the pre-infusion and then the espresso pour will follow. Press the MANUAL button again to stop t...

12 Inserting a capsule adaptor 1. Choose a Capsule adaptor base which matches your capsule brand, eg. Black = Nespresso. Insert the base into the group handle. Ensure the bayonets on the underside of the base, are inserted into the slots on the handle. Ensure the adaptor base sits flush in the group...

13 Using your espresso machine - Capsule Single Capsule Espresso Pour The capsule function removes the guess work and is programmed to pour about 30 to 40mls of coffee depending on which capsule is used. Tip: We recommend using the Capsule button for all capsules. Press the Capsule button ONCE to st...

14 Guide to milk texturing What you want to achieve is silky thick rich milk that has been heated to between 60-65°C.The steam coming out of the machine will only heat the milk, it is up to the coffee maker to aerate the milk in a way that allows the creation of beautifully textured micro foam and i...

15 Programming 1 Cup Volume PREPARE the 1 cup filter with coffee and tamp.PLACE a cup under the espresso pour spouts.PRESS and HOLD the 1 CUP button for over 1.5 seconds.Press the 1 CUP button again once the desired volume of espresso has been extracted. The espresso machine will beep twice to indic...

16 -4ºC -2ºC Factory Setting +2ºC +4ºC 4. PRESS and RELEASE one of the buttons below depending on the required Pre-infusion setting; Constant = PRESS the MANUAL button Infusion = PRESS the 1 CUP button Progressive = PRESS the 2 CUP button When the new pre-infusion program has been selected the espre...

20 Care and cleaning The coffee making process involves extracting oils out of coffee grinds to make espresso coffee. Deposits of these oils build up over time and affect the taste of the coffee and operation of the espresso machine. Regular cleaning to remove these oils is essential and will mainta...

21 Care and cleaning continued Steam wand Keeping the steam arm clean is essential to ensure maximum efficiency of the steam function. A build up of caramelised/dried milk on the steam wand will impair the steaming and texturing ability of the espresso machine. Important: Wipe the steam wand clean w...

22 Deposits of coffee oils build up over time and affect the taste of the coffee and operation of the espresso machine. Therefore the group head will require regular cleaning. It is recommended that the group head is cleaned at a minimum every 3 months, this will vary depending on the frequency of u...

24 12. The espresso machine will repeat the pumping and rest cycles for 13 times for both the STEAM and ESPRESSO thermoblocks. This will take approximately 17 minutes. 13. At the completion of the 14 cycles the espresso machine will start to beep and the 1 CUP button will flash. 14. Remove the water...

In the unlikely event that this appliance develops any malfunction within 12 months of purchase due to faulty materials or manufacture, we will REPAIR it for you free of charge. 12 Month Repair Guarantee Should you experience any difficulties with your appliance, please contact our customer service ...

is a registered trade mark. Need help with your appliance? Contact our customer service team or visit our website for information and tips on getting the most from your appliance. In Australia Visit www.sunbeam.com.au Or call 1300 881 861 In New Zealand Visit www.sunbeam.co.nz Or call 0800 786 232 ‘...