Sterling SSIL Series - Manual

Sterling SSIL Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1

2

3

4

Page: / 4 Go to

Next Page

PDF Text Table of Contents

Table of Contents:

• Page 2 – SSL and SSIL Series Hopper Loaders – Series One Plus Control; Complete Operation and Installation Instructions; Sterling; Spare Parts Location
• Page 3 – Spare Parts List; (See previous page for Spare Parts Location); NOTE: Refer to the main manual for a complete Spare Parts List.
• Page 4 – Troubleshooting – Quick Guide; Problem

Loading the manual

SSL and SSIL Series Hopper Loaders – Series One Plus Control

Reference Manual (PN: 882.00149.00) for

Complete Operation and Installation Instructions

(Available online at www.acscustomerservice.com)

Sterling

Part No: 882.00349.00

2900 S. 160

th

Street • New Berlin, WI 53151 USA

Bulletin No: CV1-335.01

Tel. 262.641.8610 • Fax 262.641.8653

Quickstart Installation Checklist

(Refer to main manual for complete installation instructions)

1. Mount hopper mounting flange to machine bin or feed throat, using rivets if possible.

2. Ensure that unit is level for proper operation.

3. Attach flex hose to unit and pickup wand. Secure it with hose clamps.

4. Attach clean, dry 80-120psi air.

5. Plug unit into grounded three-prong receptacle.

Unit Operation

(Refer to main manual for complete operating instructions)

1. Insert pickup wand into desired material.

2. Press the

START/STOP

key.

Note: The hopper loader loads itself until full, then dumps and repeats.

It pauses only when the machine bin below is full.

3. To stop the unit from loading, press the

START/STOP

key.

For Proportioning Models

1. Insert pickup wands into desired materials.

2. Press

SCROLL

key repeatedly until screen displays “

3

”.

3. Press the

START/STOP/SELECT

key to select the “% of MAT’L B” menu.

4. Use the

UP

and

DOWN

keys to set the desired % of Material B.

5. Press the

START/STOP/SELECT

key to set this value.

6. Press the

START/STOP/SELECT

key again to start the hopper loader.

Other Sterling Models

• Sterling 2000
  • Manual
• Sterling S1201-0
  • Manual
• Sterling SSE-2
  • Manual
• Sterling CFP05-30W
  • Manual
• Sterling 7210-B
  • Manual
• Sterling E045200
  • Manual
• Sterling BB122430
  • Manual
• Sterling 131
  • Manual
• Sterling STT 500
  • Manual
• Sterling C711FST
  • Manual