Page 2 - Owner’s Record; Important Safety Instructions
2 US To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the appa...
Page 3 - CAUTION
3 US 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for...
Page 4 - About This Manual; On Copyrights
4 US About This Manual • The instructions in this manual are for model HT-SS380. The illustrations used in this manual are of the USA model and they may be different from your model. Any differences in operation are marked in the manual as “USA model only”. The HT-SS380 consists of: • Receiver STR-K...
Page 5 - Table of Contents
5 US Table of Contents Supplied accessories ..................................... 6Supplied speakers.......................................... 6Description and location of parts .................. 7Getting started ............................................. 14 Connections 1: Installing the speaker...
Page 6 - Supplied accessories; and; Notes
6 US Supplied accessories • Operating Instructions (this manual)• Quick Setup Guide• FM wire antenna (aerial) (1) • Remote control (RM-AAU120) (1) • R6 (size-AA) batteries (2) • Optimizer microphone (ECM-AC2) (1) • DOCK FOR iPod/iPhone (TDM-iP380) (1) Supplied speakers • Front speaker (2)• Center sp...
Page 7 - Description and location of parts; Front panel; qs
7 US Description and location of parts A ? / 1 (on/standby) (page 24, 28, 39) B Display panel (page 7) C White indicator Lights up when the receiver is turned on.Lights off when the DIMMER is set to DIM MAX (page 43) or the receiver is turned off. D SOUND FIELD (page 32) E INPUT +/– (page 26) F Remo...
Page 9 - Rear panel
9 US A SPEAKERS section (page 17) B Audio signal sectionDIGITAL INPUT/OUTPUT jacks (page 18, 21) ANALOG INPUT jack (page 22) C AUTO CALIBRATION section (page 25) D ANTENNA section (page 23) E DMPORT section (page 22) F VIDEO signal section (page 21) Rear panel OPT IN COAX IN HDMI IN/OUT AUDIO IN AUT...
Page 10 - To control the receiver; Remote control
10 US Use the supplied remote control to operate this receiver and other equipment. The remote control is assigned to operate Sony audio/video equipment. You can reassign the input button to match the equipment connected to your receiver (page 38). RM-AAU120 To use the buttons printed in pink Hold d...
Page 11 - To control a Sony TV
11 US I AMP MENU Displays the menu to operate the receiver. J Press V / v / B / b to select the settings, then press to enter/confirm the selection. M TUNING +/– Scans a station (page 30). PRESET +/– Selects preset stations (page 31). N SOUND FIELD + 2) /– Selects a sound field (page 32). O SHIFT Ch...
Page 13 - To control other Sony equipment; Be sure to hold down SHIFT (
13 US To control other Sony equipment Be sure to hold down SHIFT ( O ) to activate the buttons printed in pink (page 10). 1) If you press AV ? / 1 ( A ) and ? / 1 ( B ) simultaneously, the receiver and connected equipment will turn off (SYSTEM STANDBY). The function of the AV ? / 1 ( A ) changes aut...
Page 14 - Getting started; Setting the audio output settings on the connected equipment
14 US Getting started You can enjoy your audio/video equipment connected to the receiver by following the simple steps below. m m m m m m Installing and connecting the speakers (page 15, 17) Connecting the TV (page 18) Connecting the video equipment (page 19) Connecting the audio equipment (page 22)...
Page 15 - : Installing the speakers; Center speaker; Tips; You can install your speakers on the wall.; Connections
15 US Connecti ons 1: Installing the speakers This receiver allows you to use a 5.1 channel speaker system. To fully enjoy theater-like multi channel surround sound, be sure to connect all the supplied speakers (two front speakers, a center speaker, and two surround speakers) and a subwoofer (5.1 ch...
Page 16 - For the center speaker
16 US 2 Fasten the screws to the wall. The screws should protrude 8 mm to 10 mm (11/32 in to 13/32 in). For the center speaker For the front speakers and surround speakers 3 Hang the speakers on the screws. Notes • Use screws that are suitable for the wall material and strength. As a plaster board w...
Page 19 - HDMI features; Using HDMI connection
19 US Connecti ons 4: Connecting the video equipment High-Definition Multimedia Interface (HDMI) is an interface which transmits video and audio signals in digital format.By connecting Sony “BRAVIA” Sync-compatible equipment using HDMI cables, operations can be simplified. See ““BRAVIA” Sync Feature...
Page 20 - Tip; When connecting cords
20 US • Before connecting cords, be sure to disconnect the AC power cord (mains lead). • It is not necessary to connect all the cords. Connect according to the availability of jacks on the connected equipment. • Use a High Speed HDMI cable. If you use a Standard HDMI cable, 1080p, Deep Color (Deep C...
Page 22 - • Be sure to use only the supplied DOCK FOR
22 US 5: Connecting the audio equipment Before connecting cords, be sure to disconnect the AC power cord (mains lead). Notes on connecting DOCK FOR iPod/iPhone • Be sure to use only the supplied DOCK FOR iPod/iPhone. • You can view the images on the TV screen by connecting the video output of the DO...
Page 24 - Initializing the receiver; Using AUTO CALIBRATION; Preparing the receiver
24 US Initializing the receiver Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to revert back to the factory default settings.Be sure to use the buttons on the receiver to perform this operation. 1 Press ? ...
Page 25 - ri; : Performing Auto Calibration
25 US Prepa ri n g the rec e iv er 1 Connect the supplied optimizer microphone to the AUTO CAL MIC jack. 2 Set up the optimizer microphone. Place the optimizer microphone at your seating position. You can also use a stool or tripod so that the optimizer microphone remains at the same height as your ...
Page 26 - To cancel Auto Calibration; View the measurement result.
26 US The table below provides measurement status shown on the display panel. To cancel Auto Calibration The Auto Calibration function will be canceled when you perform the following during the measurement process:– Press ? / 1 or MUTING. – Press input buttons on the remote control or INPUT +/– on t...
Page 27 - When error codes appear; Check the problem of the error.; To return to step 2 of; Checking the warning message
27 US Prepa ri n g the rec e iv er When error codes appear 1 Check the problem of the error. * xxx represent a speaker channel F Front S Surround SW Subwoofer Depending on the error code, the speaker channel may not appears. 2 Perform Auto Calibration again. Press V / v to select “RETRY YES”, then p...
Page 28 - Playback; Turn on the receiver.; Play back the source.; To activate the muting function; Basic Operations
28 US Playback 1 Turn on the connected equipment. 2 Turn on the receiver. 3 Press the input button which corresponds to the equipment you want. You can also use INPUT +/– on the receiver.The selected input appears on the display panel. Note When you press TUNER, “FM TUNER” appears for a while, and t...
Page 29 - When listening to FM radio; Listening to FM radio; Tuner Operations
29 US Bas ic Ope rations/T uner Oper ations Viewing information on the display panel The display panel provides various information of the receiver status such as sound field. 1 Select the input for which you want to check the information. 2 Press AMP MENU, then press DISPLAY repeatedly. Each time y...
Page 30 - If a wrong frequency is entered
30 US 1 Press TUNER. 2 Press TUNING + or TUNING –. TUNING + scans from lower to higher frequency stations and TUNING – for scanning higher to lower.The receiver stops scanning whenever a frequency is received. In case of poor FM stereo reception If the FM stereo reception is poor and “ST” flashes on...
Page 31 - r Op; Presetting radio stations; To change the preset number; Tuning to preset stations
31 US T u n e r Op era tio ns Presetting radio stations You can store up to 30 FM stations as your favorite stations. 1 Press TUNER. 2 Tune to the station that you want to preset using Automatic Tuning (page 30) or Direct Tuning (page 30). 3 Press MEMORY. A preset number appears on the display panel...
Page 32 - Selecting the sound field; Naming preset station
32 US 1 Press TUNER. 2 Tune to the preset station you want to create an index name for (page 31). 3 Press AMP MENU. 4 Press V / v repeatedly until “TUNER” appears, then press or b . 5 Press V / v repeatedly until “NAME IN” appears, then press or b . The cursor flashes and you can select a character....
Page 33 - Enjo; Reproduces the feeling of sports broadcasting.; Movie mode
33 US Enjo ying Surr ound Sound x A.F.D. STD (A.F.D. Standard) Presets the sound as it was recorded/encoded without adding any surround effects.However, this receiver will generate a low frequency signal for output to the subwoofer when there is no LFE signals. x A.F.D. MULTI (A.F.D. Multi) Outputs ...
Page 34 - What is “BRAVIA” Sync?; equipment; “BRAVIA” Sync Features
34 US • When the input signal is multi channel source, Dolby Pro Logic II Movie/Music are canceled and the multi channel source is output directly. • When the bilingual broadcast sound is input, Dolby Pro Logic II Movie/Music are not effective. • Depending on the input stream, the decoding mode may ...
Page 35 - “BRA; • If your TV is not compatible with the
35 US “BRA VIA” Sy nc Features Preparing for the “BRAVIA” Sync The receiver is compatible with the “Control for HDMI-Easy Setting” function.• If your TV is compatible with the “Control for HDMI-Easy Setting” function, you can set the Control for HDMI function of the receiver and playback equipment a...
Page 36 - Switches to appropriate HDMI input
36 US Playing back equipment with one-touch operation (One-Touch Play) By a simple operation (one-touch), equipment connected to the receiver with BRAVIA Sync function start automatically. You can enjoy the sound/images from the connected equipment. When you start playback a connected equipment, the...
Page 38 - With the AV; Example: With the AV; Advanced Settings
38 US Enjoying movies with the optimum sound field (Theatre/Theater Mode Sync) Press THEATER or THEATRE on the remote control of the TV or the Blu-ray Disc player, while pointing the remote control toward the TV. The sound field switches to “HD-D.C.S.”. To return to the previous sound field, press T...
Page 39 - nced Settings; Resetting the remote control; Using the setting menu; To exit the menu; Categories; Navigating through menus
39 US Adv a nced Settings 3 Referring to the following table, press the corresponding button for the category you want, then release AV ? / 1 . Example: Press 1, then release AV ? / 1 . Now you can use the SAT/CATV button to control the Blu-ray Disc player. a) The default setting of the BD/DVD butto...
Page 40 - Overview of the menus
40 US Overview of the menus You can set the following items using the AMP MENU.The default settings are underlined. AMP MENU AUTO CAL a) A.CAL START LEVEL TEST TONE AUTO xxx b) OFF FL LEVEL FL +6.0,… FL 0,... FL -6.0 FR LEVEL FR +6.0,… FR 0,... FR -6.0 CNT LEVEL c) CNT +6.0,... CNT 0,... CNT -6.0 SL...
Page 41 - To adjust the speaker levels; To set the speaker connection; LEVEL menu
41 US Adv a nced Settings You can adjust the level of each speaker to suit your preference. To output a test tone from each speaker You can output a test tone from the speakers in sequence.• AUTO FL, AUTO CNT, AUTO FR, AUTO SR, AUTO SL, AUTO SW • OFF When a test tone is not output from the speakers ...
Page 42 - FM MODE; • STEREO: This receiver will decode the; NAME IN; • SYNC OFF: The audio output is not; DUAL MONO; INPUT MODE; • OPT: Specifies the digital audio signals; TUNER menu
42 US You can set the FM station receiving mode and name the preset stations. x FM MODE • STEREO: This receiver will decode the signal as stereo signal when the radio station is broadcast in stereo. • MONO: This receiver will decode the signal as mono signal regardless of the broadcast signal. x NAM...
Page 43 - CTRL HDMI; • AUTO: When the TV is turned on while the; You can customize the settings of the receiver.; DIMMER; AUTO STBY; approximately 30 minutes.; HDMI menu
43 US Adv a nced Settings You can make various adjustments for HDMI settings. x CTRL HDMI Lets you turn the Control for HDMI function on or off. For details, see ““BRAVIA” Sync Features” (page 34). x PASS THRU Lets you output the HDMI signals to the TV even when the receiver is in standby mode.• ON:...
Page 44 - Precautions; On safety; Additional Information
44 US Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. On power sources • Before operating the receiver, check that the operating voltage is identical with your local power s...
Page 45 - fo; If howling occurs; Troubleshooting; Power
45 US Additional I n fo rmatio n If color irregularity is observed again... Place the speaker further away from the TV set. If howling occurs Reposition the speakers or turn down the volume on the receiver. On cleaning • Clean the cabinet, panel, and controls with a soft dry cloth. Do not use any ty...
Page 46 - There is severe hum or noise.
46 US There is no sound from a specific equipment. • Check that the equipment is connected correctly to the audio input jacks for that equipment. • Check that the cord(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the equipment. • Check that the equipment...
Page 47 - Image
47 US Additional I n fo rmatio n No sound is output from the receiver and TV speaker. • Check that the equipment is connected correctly to the HDMI jack for that equipment. • Make sure “CTRL HDMI” is set to “CTRL ON” in HDMI menu. • You cannot listen to the Super Audio CD by connecting HDMI. • Depen...
Page 48 - The FM reception is poor.; Tuner; Others
48 US The FM reception is poor. • Use a 75-ohm coaxial cable (not supplied) to connect the receiver to an outdoor FM antenna (aerial) as shown below. Radio stations cannot be tuned in. • Check that the antennas are connected securely. Adjust the antennas and connect an external antenna (aerial), if ...
Page 49 - Reference sections; Specifications; Amplifier section; Error messages
49 US Additional I n fo rmatio n If there is a malfunction, a message appears on the display panel. You can check the condition of the system by the message. If any problem persists, consult your nearest Sony dealer.If an error message appears while you perform Auto Calibration, see “When error code...
Page 50 - Speaker section
50 US Dimensions (w/h/d) (Approx.) 430 mm × 65 mm × 306 mm (17 in × 2 5/8 in × 12 1/8 in) including projecting parts and controls Mass (Approx.) 3.0 kg (6 lb 10 oz) Speaker section • Front/Surround speaker (SS-TSB105)• Center speaker (SS-CTB102) Front/Surround speaker Full range Center speaker Full ...
Page 51 - Index; Numerics
51 US Additional I n fo rmatio n Index Numerics 2 channel sound mode 325.1 channel 15 A A.F.D. MODE 32A/V SYNC 42Audio Return Channel (ARC) 37 Auto Calibration 24AUTO STBY 43 B Blu-ray Disc player connecting 21 “BRAVIA” Sync preparing 35 C Cable TV tuner connecting 21 CD player connecting 22 Clear m...
Page 52 - Registro del propietario; ADVERTENCIA
2 ES Nombre del producto: Sistema de cine para el hogar Modelo: HT-SS380POR FAVOR LEA DETALLADAMENTE ESTE MANUAL DE INSTRUCCIONES ANTES DE CONECTAR Y OPERAR ESTE EQUIPO. RECUERDE QUE UN MAL USO DE SU APARATO PODRÍA ANULAR LA GARANTÍA. Para reducir el riesgo de incendios o descargas eléctricas, no ex...
Page 54 - Acerca de este manual
4 ES Acerca de este manual • Las instrucciones que se incluyen en este manual son para el modelo HT-SS380. Las ilustraciones utilizadas en este manual corresponden al modelo de Estados Unidos y pueden no coincidir con su modelo. Las diferencias en el funcionamiento se marcan en el manual con el text...
Page 55 - Índice; Conexiones
5 ES Índice Accesorios suministrados.............................. 6Altavoces suministrados................................ 6Descripción y localización de las piezas ....... 7Procedimientos iniciales ............................. 15 Conexiones 1: Instalación de los altavoces ..................... 16...
Page 56 - Altavoces suministrados; de las pilas coincidan con el diagrama; Notas
6 ES Accesorios suministrados • Manual de instrucciones (este manual)• Guía de instalación rápida• Antena monofilar de FM (1) • Mando a distancia (RM-AAU120) (1) • Pilas R6 (tamaño AA) (2) • Micrófono optimizador (ECM-AC2) (1) • DOCK FOR iPod/iPhone (TDM-iP380) (1) Altavoces suministrados • Altavoz ...
Page 57 - Descripción y localización de las piezas; Panel frontal
7 ES Descripción y localización de las piezas A ? / 1 (encendido/en espera) (página 25, 29 y 41) B Visor (página 7) C Indicador blanco Se ilumina cuando el receptor está encendido.Se apaga cuando el DIMMER está ajustado en DIM MAX (página 46) o el receptor está apagado. D SOUND FIELD (campo sonido) ...
Page 59 - Panel posterior
9 ES A Sección SPEAKERS (altavoces) (página 18) B Sección de señal de audioTomas DIGITAL INPUT/OUTPUT (entrada/salida digital) (páginas 19 y 22) Toma ANALOG INPUT (página 23) C Sección AUTO CALIBRATION (Calibración automática) (página 26) D Sección ANTENNA (antena) (página 24) E Sección DMPORT (pági...
Page 60 - Para controlar el receptor; Mando a distancia
10 ES Con el mando a distancia suministrado podrá utilizar este receptor y otros equipos. El mando a distancia está asignado a la utilización de equipos de audio o vídeo de Sony. Con el botón de entrada puede modificar la asignación en función de los equipos que tenga conectados al receptor (página ...
Page 62 - Para controlar un televisor Sony; Mantenga pulsado TV (
12 ES Para controlar un televisor Sony Mantenga pulsado TV ( P ) y, a continuación, pulse el botón con la impresión amarilla para seleccionar la función que desee.Ejemplo: mantenga pulsado el botón TV ( P ), y, a continuación, pulse TV CH + (canal TV +) ( N ). A TV ? / 1 (encendido/en espera) Encien...
Page 63 - Para controlar otros equipos Sony; ) para activar los botones con la impresión
13 ES Para controlar otros equipos Sony Mantenga pulsado el botón SHIFT (mayúsculas) ( O ) para activar los botones con la impresión rosa (página 10). Nombre Lector de discos Blu-ray, DVD Sintonizador de satélite, decodificador de televisión por cable Videograbadora Lector de CD A AV ? / 1 1) Alimen...
Page 65 - Procedimientos iniciales; Conexión de un equipo de vídeo (página 20)
15 ES Procedimientos iniciales Siguiendo el procedimiento descrito a continuación podrá disfrutar de su equipo de audio o vídeo conectado al receptor. m m m m m m Instalación y conexión de los altavoces (página 16, 18) Conexión del televisor (página 19) Conexión de un equipo de vídeo (página 20) Con...
Page 66 - : Instalación de los altavoces; Altavoz central; Observaciones; Puede instalar los altavoces en la pared.
16 ES 1: Instalación de los altavoces Este receptor le permite utilizar un sistema de altavoces de 5.1 canales. Para disfrutar al máximo de un sonido envolvente multicanal similar al de las salas de cine, asegúrese de conectar todos los altavoces suministrados (dos altavoces frontales, un altavoz ce...
Page 69 - : Conexión del televisor
19 ES Cone xiones 3: Conexión del televisor Al conectar la toma HDMI TV OUT (salida HDMI TV) a un televisor, se ve la imagen de la entrada seleccionada.Antes de conectar los cables, asegúrese de desconectar el cable de alimentación de CA. * Para disfrutar de un programa de televisión con sonido envo...
Page 70 - Especificaciones de HDMI; Uso de la conexión HDMI
20 ES 4: Conexión de un equipo de vídeo La interfaz multimedia de alta definición (HDMI) es una interfaz que transmite señales de audio y vídeo en formato digital.Mediante la conexión de equipos compatibles con la tecnología Sony “BRAVIA” Sync utilizando cables HDMI, pueden simplificarse las operaci...
Page 71 - Conexión de los cables
21 ES Cone xiones • Antes de poder disfrutar de PCM lineal multicanal, es posible que tenga que realizar algunos ajustes en la resolución de la imagen del equipo de reproducción. Consulte el manual de instrucciones del equipo de reproducción. • Puede disfrutar de contenidos de vídeo en 3D con televi...
Page 72 - Cable digital coaxial
22 ES A Cable digital coaxial (no suministrado) B Cable HDMI (no suministrado) Sony recomienda utilizar un cable HDMI certificado o un cable HDMI de Sony. C Cable digital óptico (no suministrado) Notas • No olvide modificar el ajuste predeterminado del botón de introducción BD/DVD del mando a distan...
Page 75 - • Mida las características de la frecuencia.; Preparación del receptor
25 ES Pre p aración del rec e pto r Inicialización del receptor Antes de utilizar el receptor por primera vez, inicialícelo siguiendo los pasos que se indican a continuación. Este procedimiento también puede utilizarse para restaurar los ajustes predeterminados de fábrica.Utilice los botones del rec...
Page 76 - Observación
26 ES Notas • Los altavoces emiten un sonido muy alto durante la calibración y el volumen no puede ajustarse. Piense en los vecinos y en los niños que estén en la sala. • Si ha activado la función de silenciamiento antes de realizar la Calibración automática, se apagará automáticamente. 1 Conecte el...
Page 78 - Consulte el problema asociado al error.; Para volver al paso 2 de
28 ES 4 Desconecte el micrófono optimizador del receptor. Nota Si cambia de sitio el altavoz, le recomendamos que vuelva a realizar la Calibración automática para disfrutar del mejor sonido envolvente. Cuando aparecen códigos de error 1 Consulte el problema asociado al error. * xxx representa un can...
Page 79 - Reproducción; Encienda el equipo conectado.; Reproduzca la fuente.; Para evitar dañar los altavoces; Operaciones básicas
29 ES Opera c iones básicas Reproducción 1 Encienda el equipo conectado. 2 Encienda el receptor. 3 Pulse el botón de introducción del equipo que desea utilizar. También puede pulsar INPUT +/– (entrada +/-) en el receptor.La entrada seleccionada aparecerá en el visor. Nota Al pulsar TUNER (sintonizad...
Page 80 - Al escuchar radio FM; Escuchar la radio FM; Operaciones del sintonizador
30 ES Visualización de información en el visor El visor ofrece distintos datos sobre el estado del receptor, como el campo de sonido. 1 Seleccione la entrada de la que desea obtener información. 2 Pulse AMP MENU (menú amplificación) y, después, pulse DISPLAY (visor) varias veces. Cada vez que pulse ...
Page 82 - Vuelva a empezar desde el paso 3.
32 ES Presintonización de emisoras de radio Puede guardar un máximo de 30 emisoras de FM como emisoras favoritas. 1 Pulse TUNER (sintonizador). 2 Sintonice la emisora que desee presintonizar con Sintonización automática (página 31) o Sintonización directa (página 31). 3 Pulse MEMORY (memoria). Apare...
Page 83 - Si introduce un carácter incorrecto
33 ES Operac ione s del sintonizador 1 Pulse TUNER (sintonizador). 2 Pulse PRESET + (presintonizar +) o PRESET – (presintonizar –) para seleccionar la emisora. Cada vez que pulsa el botón, puede seleccionar una emisora presintonizada en este orden: Otra opción es mantener pulsado SHIFT (mayúsculas) ...
Page 84 - Disfrutar de sonido envolvente
34 ES Selección del campo de sonido Este receptor tiene la capacidad de crear sonido envolvente multicanal. Es posible seleccionar uno de los campos de sonido optimizados entre los campos de sonido preprogramados del receptor. Pulse SOUND FIELD +/– (campo sonido +/–) varias veces para seleccionar el...
Page 85 - Aumenta la claridad de la voz del presentador.; Modo Música
35 ES Disfrutar de sonido env o lve n te x PLII MV (Pro Logic II Movie) Efectúa la decodificación en el modo Dolby Pro Logic II Movie. Este ajuste es ideal para películas codificadas en Dolby Surround. Además, este modo puede reproducir sonido de 5.1 canales para ver vídeos de películas antiguas o s...
Page 86 - ¿Qué es “BRAVIA” Sync?; equipo; Funciones de “BRAVIA” Sync
36 ES ¿Qué es “BRAVIA” Sync? La función “BRAVIA” Sync permite la comunicación entre los productos Sony, como televisores, reproductores de discos Blu-ray, lectores de DVD o amplificadores de AV, entre otros, con la función Control por HDMI.Al conectar equipos Sony compatibles con la función “BRAVIA”...
Page 87 - Se activará la función Control por HDMI.; Se enciende
37 ES Funcio nes de “BRA VIA” Sync Si el televisor no es compatible con la función “Control por HDMI (ajuste fácil)” 1 Pulse AMP MENU (menú amplificación). 2 Pulse V / v varias veces hasta que aparezca “HDMI” y, a continuación, pulse o b . 3 Pulse V / v varias veces hasta que aparezca “CTRL HDMI” y,...
Page 88 - • Al ajustar el volumen del televisor, la; • Se activa la
38 ES Escuchar el sonido del televisor por los altavoces conectados al receptor (Control de audio del sistema) Es posible escuchar el sonido del televisor a través de los altavoces conectados al receptor mediante una sencilla operación. La función Control de audio del sistema puede controlarse a tra...
Page 90 - Con el botón AV; Configuración avanzada
40 ES Disfrutar de películas con el campo de sonido óptimo (Sincronización del modo Theater/Theatre) Pulse THEATER (cine) o THEATRE (cine) en el mando a distancia del televisor o del reproductor de discos Blu-ray con el mando a distancia orientado hacia el televisor. El campo de sonido pasa a “HD-D....
Page 91 - Reinicio del mando a distancia; Uso del menú de ajustes; Para volver a la pantalla anterior; Categorías; Navegación por los menús
41 ES Con fig uración a v anzada 3 Consultando la tabla siguiente, pulse el botón asociado a la categoría que desee y, a continuación, suelte AV ? / 1 . Ejemplo: Pulse 1 y, a continuación, suelte AV ? / 1 . A partir de ahora podrá utilizar el botón SAT/CATV para controlar el reproductor de discos Bl...
Page 93 - Menú LEVEL
43 ES Con fig uración a v anzada Es posible ajustar el nivel de cada altavoz para adaptarlo a sus preferencias. Para emitir un tono de prueba desde cada altavoz Puede emitir un tono de prueba desde los altavoces siguiendo una secuencia.• AUTO FL, AUTO CNT, AUTO FR, AUTO SR, AUTO SL, AUTO SW • OFF Si...
Page 94 - Menú SPEAKER
44 ES Es posible ajustar la distancia de los altavoces conectados a este receptor. Para ajustar la conexión de los altavoces • CENTER (SUR) YES: se selecciona cuando conecta el altavoz. • CENTER (SUR) NO: se selecciona cuando no conecta el altavoz. Para ajustar la distancia de los altavoces Puede aj...
Page 95 - • MAIN: se emite el sonido correspondiente al; NIGHT MODE; • OPT: especifica las señales de audio digital; • AUTO: cuando se enciende el televisor; Menú HDMI
45 ES Con fig uración a v anzada x DUAL MONO Le permite elegir el idioma que prefiere al escuchar audio dual en una emisión digital, cuando esta opción está disponible. Esta función solo puede utilizarse en las fuentes Dolby Digital.• MAIN / SUB: se emite, simultáneamente, el sonido correspondiente ...
Page 96 - Precauciones; Seguridad; Menú SYSTEM
46 ES Puede personalizar los ajustes del receptor. x DIMMER Le permite ajustar el brillo del visor en tres niveles.• DIM MAX• DIM MID• DIM OFF x SLEEP Le permite configurar el receptor para que se apague automáticamente cuando haya transcurrido el tiempo especificado.• 2-00-00• 1-30-00• 1-00-00• 0-3...
Page 97 - Acumulación de calor
47 ES In fo rmaci ón adicio nal Acumulación de calor Que el receptor se caliente durante el funcionamiento no indica un fallo de funcionamiento. Si utiliza este receptor de forma continua a niveles de volumen elevados, la temperatura aumentará considerablemente en las partes superior, laterales e in...
Page 98 - Solución de problemas; El receptor se apaga automáticamente.; Alimentación
48 ES Solución de problemas Si experimenta alguna de las siguientes dificultades cuando utilice el receptor, utilice esta guía de solución de problemas para solucionar el problema. Si el problema persiste, consulte con el distribuidor Sony más cercano. Tenga en cuenta que si el personal del servicio...
Page 100 - Imagen
50 ES No se emite sonido del receptor ni del altavoz del televisor. • Compruebe que el equipo está conectado correctamente a la toma HDMI correspondiente a dicho equipo. • Asegúrese de que “CTRL HDMI” esté ajustado en “CTRL ON” en el menú HDMI. • No es posible escuchar un Super Audio CD mediante una...
Page 101 - Sintonizador; Otros
51 ES In fo rmaci ón adicio nal La recepción de FM no es buena. • Utilice un cable coaxial de 75 ohmios (no suministrado) para conectar el receptor a una antena de FM externa como se muestra a continuación. No se pueden sintonizar emisoras de radio. • Compruebe que las antenas estén conectadas corre...
Page 102 - PROTECTOR; Apartados de referencia; Especificaciones; Sección del amplificador; Mensajes de error
52 ES Si se produce un error, aparece un mensaje en el visor. El mensaje proporciona información sobre el estado del sistema. Si el problema persiste, consulte con el distribuidor Sony más cercano.Si aparece un mensaje de error mientras se realiza el proceso de Calibración automática, consulte “Cuan...
Page 103 - • Altavoz frontal/altavoz de sonido
53 ES In fo rmaci ón adicio nal General Requisitos de alimentación ca de 120 V, 60 Hz Salida de potencia (DMPORT) Salida de CC: 5 V, 1 A Max Consumo de energía 110 WConsumo de energía (durante el modo de espera) 0,3 W (si Control por HDMI está desactivado) Dimensiones (an/al/prf) (Aprox.) 430 mm × 6...