Page 2 - Instructions; General safety instructions; Risk of personal injury
Instructions 4 1 Instructions 1.1 General safety instructions Risk of personal injury • During use the appliance and its accessible parts become very hot. • Never touch the heating elements during use. • Keep children under eight years of age at a safe distance if they are not constantly supervised....
Page 3 - For this appliance; Identification plate; • The identification plate bears the technical
Instructions 5 EN • Use wooden or plastic utensils.• Do not seat on the appliance.• Do not use steam jets to clean the appliance. • Do not obstruct ventilation openings and heat dispersal slots. • Never leave the appliance unattended during cooking operations where fats or oils could be released. • ...
Page 4 - Identification plate; Danger of suffocation
Instructions 6 Our appliances are packed in non-polluting and recyclable materials.• Deliver the packing materials to the appropriate recycling centre. 1.4 Identification plate The identification plate bears the technical data, serial number and brand name of the appliance. Do not remove the identif...
Page 5 - Description; General Description; Control panel
Description 7 EN 2 Description 2.1 General Description 1 Control panel 2 Oven light 3 Seal 4 Door 5 Fan 6 Rack/tray support frames Frame shelf 2.2 Control panel 1 Programming knob This knob can be used to select:• The cooking temperature• The duration of a function• Programmed cooking procedures• Th...
Page 6 - Function knob
Description 8 3 Function knob This knob can be used to:• Turn the appliance on and off• Select a function• Temporarily start or stop a function. 2.3 Other parts Interior lighting The appliance interior lighting comes on:• When the door is opened (on some models only). • When any function is selected...
Page 7 - Available accessories; Rack
Description 9 EN 2.4 Available accessories Rack Useful for supporting containers with food during cooking. Tray rack To be placed over the top of the oven tray; for cooking foods which may drip. Oven tray Useful for collecting fat from foods placed on the rack above. Deep tray Useful for collecting ...
Page 8 - Use; Danger of burns
Use 10 3 Use 3.1 Instructions 3.2 First use 1. Remove any protective film from the outside or inside of the appliance, including accessories. 2. Remove any labels (apart from the technical data plate) from the accessories and from the oven cavity. 3. Remove and wash all the appliance accessories (se...
Page 9 - Using the accessories; Racks and trays
Use 11 EN 3.3 Using the accessories Racks and trays Racks and trays have to be inserted into the side guides until they come to a complete stop.• The mechanical safety locks that prevent the rack from being taken out accidentally have to face downwards and towards the oven back. Tray rack The tray r...
Page 10 - Switching on the oven
Use 12 3.4 Using the oven Switching on the oven 1. Press the function knob to turn on the display. 2. Turn the function knob to the right or left to select the required function. 3. Press the programming knob. 4. Turn the knob to set the temperature. 5. Press the programming knob or wait 3 seconds. ...
Page 11 - Fan assisted; and
Use 13 EN Fan assisted The operation of the fan, combined with traditional cooking, ensures consistent cooking even with complex recipes. Perfect for biscuits and cakes, even when simultaneously cooked on several levels. (For multiple-level cooking, we recommend using the 2 nd and 4 th shelves). Fan...
Page 12 - Display
Use 14 Display Clock indicator light Minute minder timer indicator light Programmed cooking indicator light Timed cooking indicator light Door lock indicator light (pyrolytic models only) Child lock indicator light Showroom indicator light Operating modes Stand-by: When no function is selected, the ...
Page 13 - Setting the time
Use 15 EN Setting the time On the first use, or after a power failure, the message will flash on the appliance's display. To be able to start any cooking function, the current time must be set.1. Turn the programming knob to set the displayed hour (keep the knob turned to produce a faster increase o...
Page 14 - Timed cooking
Use 16 Timed cooking 1. After selecting a cooking function and temperature, press the programming knob three times. The display shows and the indicator light flashes. 2. Turn the programming knob to set the cooking time (from 00:01 to 13:00). Keep the knob turned to produce a faster increase or decr...
Page 15 - Programmed cooking
Use 17 EN Programmed cooking 1. After selecting a cooking function and temperature, press the programming knob three times. The display shows and the indicator light flashes. 2. Turn the knob to set the cooking time (from 00:01 to 13:00). Keep the knob turned for a fast increase or decrease. 3. Pres...
Page 16 - General advice
Use 18 3.5 Cooking advice General advice • Use a fan assisted function to achieve consistent cooking at several levels. • It is not possible to shorten cooking times by increasing the temperature (the food could be overcooked on the outside and undercooked on the inside). Advice for cooking meat • C...
Page 17 - Cooking information table
Use 19 EN Cooking information table Food Weight (Kg) Function Runner position from the bottom Temperature (°C) Time (minutes) Lasagne 3 - 4 Static 1 220 - 230 45 - 50 Pasta bake 3 - 4 Static 1 220 - 230 45 - 50 Roast veal 2 Turbo/Fan assisted 2 180 - 190 90 - 100 Pork 2 Turbo/Fan assisted 2 180 - 19...
Page 18 - Special functions; Defrost by time
Use 20 3.6 Special functions Defrost by time 1. Place the food inside the oven.2. Press and turn the function knob to select the defrost by time function marked by the indicator light and the indicator light flashing. 3. Turn the programming knob to adjust the duration (from 1 minute to 13 hours). 4...
Page 19 - Proving
Use 21 EN Preset parameters: Proving 1. Press and turn the function knob to select the proving function. 2. Press the function knob to start the proving function. 3. While the function is in progress, it is possible to set a minute minder (see “Minute minder”), a proving duration (see “Timed cooking...
Page 20 - Sabbath
Use 22 Sabbath 1. Press and turn the function knob to select the Sabbath function. 2. Press and turn the programming knob to select the required temperature (from 60°C to 100°C). 3. Press the programming knob to confirm the parameters entered. 4. Press the function knob to start the Sabbath function...
Page 21 - ON
Use 23 EN 3.7 Secondary menu The appliance also has a drop-down secondary menu allowing the user to:• Activate or deactivate the Child Lock.• Activate or deactivate Showroom mode (which disables all the heating elements so that only the control panel works). • Activate or deactivate Eco-Logic mode.•...
Page 22 - OFF
Use 24 Showroom mode (for exhibitors only): This mode allows the appliance to deactivate all heating elements, while keeping the control panel active. To use the appliance normally, set this mode to OFF . Eco-logic mode: This mode allows the appliance to limit the power used. Indicated for use of mu...
Page 23 - Keep warm
Use 25 EN Keep warm This mode allows the appliance to keep cooked food warm (at low temperatures) after cooking finishes with a cooking cycle for which a duration has been set (if this is not manually interrupted), without altering the taste and aromas obtained during cooking. To use the appliance n...
Page 24 - Cleaning and maintenance; Cleaning the appliance; Grasp the door on both sides with both
Cleaning and maintenance 26 4 Cleaning and maintenance 4.1 Instructions 4.2 Cleaning the appliance Recommendations for cleaning the oven compartment In order to keep your oven in the best possible condition, clean it regularly after letting it cool down.Avoid letting food residue dry inside the oven...
Page 25 - To reassemble the door, put the hinges in; Cleaning the door glazing; Removing the internal glass panes
Cleaning and maintenance 27 EN 3. To reassemble the door, put the hinges in the relevant slots in the oven, making sure that grooved sections A are resting completely in the slots. Lower the door and once it is in place remove the pins from the holes in the hinges. 4.4 Cleaning the door glazing The ...
Page 26 - Removing rack/tray support frames
Cleaning and maintenance 28 5. Refit the panes in the reverse order in which they were removed. 6. Reposition the internal glass pane. Take care to centre and insert the 4 pins into their housings in the oven door by applying slight pressure. Removing rack/tray support frames Removing the rack/tray ...
Page 27 - Vapor Clean setting
Cleaning and maintenance 29 EN • Spray a water and washing up liquid solution inside the oven using a spray nozzle. Direct the spray against the side walls, upwards, downwards and towards the deflector. • Close the door.• During the assisted cleaning cycle, wash the self-cleaning panels (where fitte...
Page 28 - Setting timed Vapor Clean
Cleaning and maintenance 30 4. At the end of the Vapor Clean cycle, STOP flashes on the display and a buzzer will sound that can be deactivated by pressing the function knob. Setting timed Vapor Clean It is possible to program the Vapor Clean start time, like any cooking function.1. After selecting ...
Page 29 - Preliminary operations
Cleaning and maintenance 31 EN 4.6 Pyrolytic function (on some models only) Preliminary operations Before starting the pyrolytic cycle:• Clean the internal glass pane following the usual cleaning instructions. • For very stubborn encrustations spray an oven cleaning product onto the glass (read the ...
Page 30 - Pyrolytic cycle
Cleaning and maintenance 32 Pyrolytic cycle 1. Two minutes after the Pyrolytic cycle starts, the indicator light comes on to indicate that the door is locked by a device that prevents the door from being opened. 2. At the end of the Pyrolytic cycle, STOP flashes on the display and a buzzer will soun...
Page 31 - Setting of a programmed Pyrolytic cycle; Extraordinary maintenance; Replacing the internal light bulb
Cleaning and maintenance 33 EN Setting of a programmed Pyrolytic cycle It is possible to program the pyrolytic cycle start time like all other cooking functions.1. After selecting the Pyrolytic function and setting the duration (except for Eco Pyrolytic), press the programming knob. The display will...
Page 32 - Replace the lamp with one of the same
Cleaning and maintenance 34 4. Slide out and remove the lamp. 5. Replace the lamp with one of the same type (40W). 6. Refit the cover. Ensure the moulded part of the glass ( A ) is facing the door. 7. Press the cover completely down so that it attaches perfectly to the bulb support. Removing and fit...
Page 33 - Installation; Electrical connection; General information; Cable replacement; Power voltage
Installation 35 EN 5 Installation 5.1 Electrical connection General information Check the grid characteristics against the data indicated on the plate.The identification plate bearing the technical data, serial number and brand name is visibly positioned on the appliance.Do not remove this plate for...
Page 34 - Fastening bushings
Installation 36 5.3 Positioning Fastening bushings 1. Remove the bushing covers inserted on the front of the appliance. 2. Mount the appliance into the recess. 3. Secure the appliance to the piece of furniture using screws. 4. Cover the bushings with the covers removed previously. Heavy appliance Cr...
