Smeg PGF95BE-1- Manual

Smeg PGF95BE-1

Smeg PGF95BE-1– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
Page: / 16

Table of Contents:

  • Page 2 – Introduction; INSTRUCTIONS FOR SAFE AND PROPER USE
  • Page 4 – Instructions for the installer; POSITIONING OF THE HOB; Create an opening with the
  • Page 6 – Apply a layer of “waterproof primer” to the milled surface.
  • Page 8 – connection; Do not use reducers, adapters or shunts.
  • Page 9 – requirements
  • Page 11 – ADJUSTMENT TO DIFFERENT TYPES OF GAS; Replacement of nozzles on the hob; Replace the burners in the correct position.
  • Page 12 – Burner and nozzle characteristics table; Arrangement of burners on cooking hob; Auxiliary
  • Page 13 – FINAL; Regulation of minimum for town gas and natural gas
  • Page 14 – Instructions for the user; USING; Ignition of the burners; the high flame symbol
  • Page 15 – Practical advice for using the burners
  • Page 16 – CLEANING; Before any intervention, disconnect the appliance from the mains.; Cleaning the stainless steel; Routine daily cleaning; Cleaning of cooking hob components
Loading the manual

Summary

1

INSTRUCTIONS FOR SAFE AND PROPER USE______________ 20

2

POSITIONING OF THE HOB ______________________________ 22

3

ADJUSTMENT TO DIFFERENT TYPES OF GAS ______________ 29

4

FINAL OPERATIONS ____________________________________ 31

5

USING THE HOB _______________________________________ 32

6

CLEANING AND MAINTENANCE __________________________ 34















THESE INSTRUCTIONS ARE VALID ONLY FOR END USER COUNTRIES WHOSE
IDENTIFICATION SYMBOLS APPEAR ON THE COVER OF THIS MANUAL.

INSTRUCTIONS FOR THE INSTALLER: these are for the qualified
technician who must carry out a suitable check of the gas system,
install the appliance, set it functioning and carry out an inspection test.

INSTRUCTIONS FOR THE USER : these contain user advice,
description of the commands and the correct procedures for cleaning
and maintenance of the appliance.

19

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Introduction; INSTRUCTIONS FOR SAFE AND PROPER USE

Introduction 1 INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE HOB. WE ADVISE READING THIS MANUAL AND ALL THE INSTRUCTIONS THEREIN BEFORE USING THE HOB. ALSO ...

Page 4 - Instructions for the installer; POSITIONING OF THE HOB; Create an opening with the

Instructions for the installer 2 POSITIONING OF THE HOB The following operation requires building and/or carpentry work so must be carried out by a competent tradesman. Installation can be carried out on various materials such as masonry, metal, solid wood or plastic laminated wood, as long as they ...

Page 6 - Apply a layer of “waterproof primer” to the milled surface.

Instructions for the installer 2.2 Attachment to support structure, flush-mounting model Create an opening with the dimensions shown in the figure in the work surface, observing a minimum distance of 50 mm from the rear edge. The lower part of the protective cover must be fully accessible when the a...

Other Smeg Models