Smeg DOSPA6395X - User Manual

Description 7 ITEN 2 Description 2.1 General Description 1 Control panel 2 Main oven light 3 Main oven seal 4 Main oven door 5 Fan 6 Rack/tray support frames Frame shelf 7 Auxiliary oven light 8 Auxiliary oven seal 9 Auxiliary oven door 2.2 Control panel

Description 8 1 Main oven temperature knob This knob allows you to select the cooking time and temperature, set programmed cooking and the current time as well as turn the light inside the oven on and off. 2 Main oven function knob This knob allows you to turn the appliance on and off and select the...

Description 9 ITEN 2.4 Available accessories Rack Useful for supporting containers with food during cooking. Tray rack To be placed over the top of the oven tray; for cooking foods which may drip. Oven tray Useful for collecting fat from foods placed on the rack above and for cooking sweets, biscuit...

Use 10 3 Use 3.1 Instructions 3.2 First use 1. Remove any protective film from the outside or inside of the appliance, including accessories. 2. Remove any labels (apart from the technical data plate) from the accessories and from the oven cavity. 3. Remove and wash all the appliance accessories (se...

Use 11 ITEN 3.3 Using the accessories Racks and trays Racks and trays have to be inserted into the side guides until they come to a complete stop.• The mechanical safety locks that prevent the rack from being taken out accidentally have to face downwards and towards the oven back. Tray rack The tray...

Use 12 3.5 Using the main oven with display First use On the first use, or after a power failure, will be flashing on the appliance's display. In order to be able to start any cooking program, the current time must be set (if the oven is being turned on for the first time, it is also recommended you...

Use 13 ITEN Cooking functions 1. Turn the control knob to the right or left to select cooking functions from the main menu. Then press it to confirm. 2. Turn the control knob to select the required function. Press the knob to confirm the selection. 3. The appliance will begin automatic preheating. T...

Use 14 List of cooking functions Certain functions are not available on all models. Eco The combination of the fan and the circular heating element, in ECO mode, is particularly indicated for cooking on a single shelf, with reduced power consumption. Convection As the heat comes from above and below...

Use 15 ITEN Baker's function The combination of the fan with just the lower heating element allows cooking to be completed more rapidly. This system is recommended for sterilising or for finishing off the cooking of foods which are already well-cooked on the surface, but not inside, which therefore ...

Use 16 3.6 Cooking advice General advice • Use a fan-assisted function to achieve consistent cooking at several levels. • It is not possible to shorten cooking times by increasing the temperature (the food could be overcooked on the outside and undercooked on the inside). • To prevent excessive amou...

Use 17 ITEN Timer during function 1. Press the control knob during a cooking function. 2. Turn the control knob right or left to set the duration (from 1 minute to 4 hours). After a few seconds, the symbol stops flashing and the countdown starts. 3. Wait for the buzzer to indicate that the time has ...

Use 18 4. At the end of the cooking time “function ended” appears on the display and a buzzer will sound that can be deactivated by pressing the control knob. Modifying the data set during timed cooking During operation, it is possible to modify timed cooking duration: 1. When the symbol is steady a...

Use 20 Modifying the data set during programmed cooking During operation, it is possible to modify programmed cooking duration: 1. When the and symbols are lit steadily and the appliance is waiting for cooking to start, press the control knob. The symbol starts flashing. 2. Turn the control knob to ...

Use 21 ITEN Proving The proving function, using the heat coming from the top, makes it possible to prove all types of dough, guaranteeing perfect results quickly. Food warming To heat food or keep it hot. Sabbath mode This mode allows food to be cooked while respecting the requirements of the Jewish...

Use 22 Timer 1. Turn the control knob to the right or left to select timer from the “special functions” menu. Then press it to confirm. 2. Turn the control knob right or left to set the duration (from 1 minute to 4 hours). After a few seconds, the symbol stops flashing and the countdown starts. 3. I...

Use 23 ITEN Defrost by weight 1. Place the food inside the appliance.2. Turn the control knob to the right or left to select defrost by weight from the “special functions” menu. Then press it to confirm. 3. Turn the control knob to select the type of food to defrost. 4. Turn the control knob to sele...

Use 24 Pre-set parameters: Defrost by time 1. Place the food inside the appliance.2. Turn the control knob to the right or left to select defrost by time from the “special functions” menu. Then press it to confirm. 3. Turn the control knob to adjust the value (from 1 minute to 13 hours). 4. Press th...

Use 26 7. At the end of the cooking time “function ended” appears on the display and a buzzer will sound that can be deactivated by pressing the control knob. Food warming 1. Position the tray on the first shelf and place the plates to be warmed in its centre. 2. Turn the control knob to the right o...

Use 27 ITEN 6. While the function is in progress, it is possible to set a timer for a maximum of 4 hours (see “Timer during function”), a warming duration (see “Timed cooking”) or a delayed warming (see “Delayed cooking”). Press the control knob to make the required changes. 7. At the end of the coo...

Use 28 1. Turn the control knob to the right or left to select sabbath mode from the “special functions” menu. Then press it to confirm. 2. Turn the control knob to the right or left to change the heating temperature. 3. Press the control knob to confirm the parameters and start the Sabbath mode. 4....

Use 29 ITEN 3. Select the type of cooking (where possible, depending on the dish chosen) and press the control knob to confirm. 4. Turn the control knob to select the dish weight. 5. At this point it is possible to start the selected preset program, permanently modify the settings or perform delayed...

Use 30 Ending a preset program 1. When the preset program has finished, the appliance will warn the user with buzzers and the flashing symbol. 2. Press the control knob to perform cooking with the same parameters currently set (press the knob twice if the buzzer is active). The appliance will automa...

Use 31 ITEN 4. Turn the control knob to the right or left to select the duration to associate with the preset program. Press the control knob to confirm. 5. Turn the control knob to the right or left to select the temperature to associate with the preset program. Press the control knob to confirm. 6...

Use 32 Preset program table MEATS FISH VEGETABLES Subcategory Cooking Weight (Kg) Function Level Temp. (°C) Time (minutes) Roast beef rare 1 Fan forced 2 200 35 medium 1 Fan forced 2 200 40 well done 1 Fan forced 2 200 45 Pork loin - 1 Supercook 2 190 75 Lamb medium 1 Supercook 2 190 100 well done 1...

Use 33 ITEN DESSERTS/PASTRIES BREAD PIZZA PASTA/RICE Subcategory Cooking Weight (Kg) Function Level Temp. (°C) Time (minutes) Ring cake - 1 Fan assisted 2 160 60 Biscuits - 0.6 Supercook 2 160 18 Muffins - 0.5 Fan forced 2 160 18 Profiteroles - 0.5 Supercook 2 180 70 Meringues - 0.3 Supercook 2 120 ...

Use 34 SLOW COOKING Subcategory Cooking Weight (Kg) Function Level Temp. (°C) Time (minutes) Veal - 1 Supercook 2 90 360 Beef rare 1 Convection 2 90 105 well done 1 Convection 2 90 380 Pork - 1 Supercook 2 90 330 Lamb - 1 Supercook 2 90 360 The cooking times in the table refer to the food indicated ...

Use 35 ITEN Auxiliary oven cooking information table Food Weight (Kg) Function Runner position from the bottom Temperature (°C) Time (minutes) Lasagne 3 / 4 Static 1 or 2 220 - 230 50 - 60 Pasta bake 2 Static 1 or 2 220 - 230 40 Roast veal 1 Static 2 180 - 190 70 - 80 Pork loin 1 Static 2 180 - 190 ...

Use 37 ITEN 6. Turn the control knob to the right or left to select the shelf to associate with the recipe. Press the control knob to confirm. 7. Pressing the control knob again will return to point 2 of the change sequence. You must press the return knob to save the recipe. The appliance will ask y...

Use 40 4. Press the control knob to confirm. 5. After a few seconds the symbol stops flashing. The appliance waits for the delayed start time. 3.10 Settings The product configuration can be set using this menu. Language Sets the interface language from those available.1. Turn the control knob to the...

Use 41 ITEN Control lock Allows the appliance to lock the controls automatically after one minute of normal operation without any intervention from the user. To confirm activation of the control lock, select YES . During normal operation it is indicated by the indicator light coming on. To release t...

Use 42 Eco-Logic This mode allows the appliance to limit the power used. Indicated for use of multiple home appliances at the same time. If this option is enabled, the symbol will appear on the display. To confirm activation of the eco-logic mode, select YES . Sound Whenever one of the knobs is pres...

Use 43 ITEN Eco-Light For greater energy savings, the light is automatically deactivated one minute after the start of cooking. To confirm activation of the eco-light mode, select YES . Digital clock Displays the time in digital format. To confirm activation of the digital clock, select YES . When n...

Cleaning and maintenance 44 4 Cleaning and maintenance 4.1 Instructions 4.2 Cleaning the surfaces To keep the surfaces in good condition, they should be cleaned regularly after use. Let them cool first. 4.3 Ordinary daily cleaning Always use only specific products that do not contain abrasives or ch...

Cleaning and maintenance 46 6. Reposition the internal glass panel. Take care to centre and insert the 4 pins into their housings in the oven door by applying slight pressure. 4.8 Cleaning the inside of the oven For the best oven upkeep, clean it regularly after having allowed it to cool.Take out al...

Cleaning and maintenance 47 ITEN 4.9 Pyrolytic (main oven only) Preliminary operations Before starting the pyrolytic cycle:• Clean the internal glass panel following the usual cleaning instructions. • For very stubborn encrustations spray an oven cleaning product onto the glass (read the warnings on...

Cleaning and maintenance 48 3. Press the control knob. The symbol will now be lit solidly. The display shows a warning to remove accessories from inside the oven cavity. 4. Press the control knob to start the pyrolytic cycle. Pyrolytic 1. The display shows “cleaning in progress” and the remaining ti...

Cleaning and maintenance 49 ITEN Setting of programmed pyrolytic cycle It is possible to program the pyrolytic cycle start time.1. After selecting the pyrolytic cycle duration, press the control knob. The display shows the current time and the symbol comes on. 2. Turn the control knob to set the tim...

Installation 51 ITEN 5 Installation 5.1 Electrical connection General information Check the grid characteristics against the data indicated on the plate.The identification plate bearing the technical data, serial number and brand name is visibly positioned on the appliance.Do not remove this plate f...

Installation 52 5.2 Cable replacement 1. Unscrew the fastening screws 2 of the terminal board cover. 2. Slide the tabs 1 of the terminal board cover out of the grooves; 3. Loosen the screw of the cable retention bracket in the right lower part of the oven back 3 ; 4. Make sure that the cables (for t...

Installation 53 ITEN Fixing To secure the appliance to the counter, screw in 6 screws through the holes in the frame. Appliance overall dimensions (mm) Mounting (mm) The oven is designed for mounting into any piece of furniture as long as it is heat-resistant. Respect the unit dimensions and the ove...