Silvercrest KH 2450 - Manual

10 5.3 Top o Memory card slot » SD/MMC« (for SD/MMC memory cards) a Button »ON/OFF« (for switching the voice recorder on and off ) s Microphone jack socket »MIC « (for connecting an external microphone with a 3.5 mm jack plug) d Status lamp »DICT « f Microphone »MIC « (internal microphone of the voi...

11 2 Only for mains power operation: Insert the DC plug (barrel plug) of a suit- able power adapter into the socket »DC 5V 0.5A« u on the voice recorder. A power adapter is not supplied. Pay heed to the correct polarity of the DC plug. For this voice recorder, a suitable power adapter must have a po...

14 Ú in battery/cell operation, the battery symbol ; the beams in the battery symbol indicate the current full resp. charged condition of the batteries. Ú in mains power/USB operation the symbol . The voice recorder is now ready for use. 7. using the voice recorder 7.1 Switching the voice recorder o...

15 Menu NEW Free 11:43h no dictations q w e r t q The amount of recording time currently available for dictations, e.g. »Free 11:43h« w With battery/cell operation: the battery symbol ; the beams in the battery symbol indicate the current full resp. charged condition of the batteries. With mains pow...

18 In accord with this pattern, after every further three hours additional dictations are automatically initiated (e.g. »DICT008B«, »DICT008C« etc.). For each of these an acoustic signal sounds. 5 When you wish to interrupt the dictation recording: Place the multi-function slider h at » STOP«. In th...

19 3 Should there be several dictations extant: Select the one you want by pressing the function buttons B e /C r »DICT ±« to switch between the saved dicta- tions. When the desired dictation recording is shown in the display q : 4 Place the multi-function slider h at » START«. The selected dictatio...

22 7.6 Handling recorded dictations 7.6.1 Overwriting passages in a recorded dictation You can amend saved dictations at any point; for this, simply start a new dictation recording at the desired point: 1 Switch the voice recorder on by pressing the button »ON/OFF« a . As soon as the start screen is...

23 2 Should there be several dictations extant: Select the one you want by press- ing the function buttons B e /C r »DICT ±« to switch between the saved dictations. When the designation of the dictation recording to be amended is shown in the display q : 3 Place the multi-function slider h at » STAR...

25 6 By pressing the function button D t select »OK«. The dictation recording will now be deleted, subsequently, the Menu is once again indicated in the display q . 7.7.2 Partially deleting recorded dictations To partially delete the selected dictation recording: 6 By pressing the function button B ...

27 8. Further functions and adjustments of the voice recorder 8.1 Activating/deactivating the key lock This voice recorder is fitted with a key lock. With an activated key lock the voice recorder is protected against unintentional operation resp. being unintentionally switched on. To activate the ke...

29 Menu NEW no dictations Free 11:43h A 8.3 Provide dictation recordings with references Dictation recordings that you save onto the voice recorder can be provided with a reference. References can be serial numbers or freely selectable combinations of numbers, letters and characters. References can ...

36 7 Select, by pressing the function button C r , »VA on«. Subsequently select, by pressing the function button D t , »OK«. In the display q the Menu is once again shown; to return to the start screen: select, by pressing the function button A w twice in succession, »ESC«. When voice activation is ...

38 6 Now select, by pressing the function buttons B e resp. C r , »Dictation« or »Conference«. Subsequently select, by pressing the function button D t , »OK«. The microphone sensitivity is now set to your personal selection; In the display q the Menu is once again shown. To return to the start scre...

44 6 Select, by pressing the function button B e or C r , the type of audio signal to be switched on/off. »Auto off« stands for Ack. beep, »Battery low« for audio warnings. Subsequently select, by pressing the function button D t , »OK«. In the display q is indicated: OK ESC Signal on Signal off 7 T...

46 6 Select, by pressing the function button B e or C r , »Off« or »Auto«. Subse- quently select, by pressing the function button D t , »OK«. In the display q the programming Menu is once again shown. To return to the start screen: Se- lect, by pressing the function button A w twice in succession, »...

47 4 Select, by repeated pressing of the function button C r , the Menu item »Set- tings«. Then select, by pressing the function button D t , »OK«. In the display q is indicated: OK ESC Voice active. Mic. Sensitivity PC Microphone 5 Select, by pressing the function button C r , the Menu item »Rec. m...

49 OK ESC 01d 01m 06y 00h 00m 6 Carry out the steps 5 to 14 in chapter 6, » Preparing the voice recorder for use«. To subsequently return to the start screen: Select, by pressing the function but- ton A w twice in succession, »ESC«. 8.13 Resetting the internal dictation counter Every new dictation r...

51 6 By pressing the function button D t select »OK«. The dictation counter has now been returned to null. In the display q the programming menu is now once again shown. To return to the start screen: Select, by pressing the func- tion button A w twice in succession, »ESC«. 8.14 Returning the voice ...

52 OK ESC Voice active. Mic. Sensitivity PC Microphone 5 Select, by repeated pressing of the function button C r , the Menu item »Fac- tory setting«. By pressing the function button D t select »OK«. In the display q is indicated: OK ESC Reset all settings? 6 Select, by pressing the function button D...

54 OK ESC Memory Format? 6 By pressing the function button D t select »OK«. Formatting of the internal memory begins; during formatting the hourglass symbol is shown in the dis- play q . As soon as the formatting is complete, shown in the display q is: OK Formatting successful! 7 Select, by pressing...

56 OK ESC Voice active. Mic. Sensitivity PC Microphone 5 Select, by repeated pressing of the function button C r , the Menu item »Language«. By pressing the function button D t select »OK«. In the display q is indicated: OK ESC Dansk Deutsch English 6 Select, by pressing the function buttons B e or ...

60 the voice recorder for dictation recordings. Additionally, in PC operation you cannot utilise the menu or any of the other adjustments for the voice recorder. 3 Insert the small plug of the supplied USB cable into the USB interface » « k on the voice recorder. 4 Insert the large plug of the USB c...

61 Before taking it into use … Ú the software must first of all be installed on the PC. Ú the voice recorder must be connected with the supplied USB cable to a USB in- terface on the PC. ‹ ] noTICe: › The steps towards installing and using the software »Convert« will be shown for the case of the ope...

63 10.2 Using the software »Convert« ‹ ] noTICe: › All of the screenshots shown in this chapter (pictures of the display on the PC monitor) are examples. Dependant on the operating system and settings, the displays on your PC may differ slightly from those shown here. Should message windows appear o...

67 Click on the button »OK«. The conversion is now finalised. Should you wish to copy further dictation recordings: Repeat the steps 8 to 9. You would like to separate the voice recorder from the PC: 11 First, click on the symbol »Securely remove hardware« in the Info-area of the task bar. This is t...

68 5 On the PC monitor appears the notification Click on the button »Yes«. Following this, the window for the »Uninstall Wiz- ard« opens; the deinstallation then progresses completely automatically. 6 Indicated on completion of the deinstallation is: 7 Finally, click on the button »OK«. The software...

69 11.2 Connecting an external microphone to the voice recorder Should you prefer to use an external microphone for dictation recording instead of the internal microphone of the voice recorder:Insert the 3.5 mm jack plug of the microphone into the microphone socket »MIC « s . The internal microphone...

70 13.1.2 With mains power operation 1 Check to ensure that the DC plug of the power adapter is correctly inserted into the socket »DC 5V 0.5 A« u . 2 Check to see if the power adapter cable is correctly inserted into the mains power socket. 3 Check to see that the mains power socket into which the ...

71 Insert batteries or fully charged cells into the battery compartment. Be sure to insert the batteries/cells with their correct polarities. The correct polarity is in- dicated inside the battery compartment. Close and secure the battery compart- ment. 2 Check to see if the voice recorder now funct...

72 14. Disposal 14.1 Device Do not dispose of the device in your normal domestic waste. This product is subject to the provisions of European Directive 2002/96/EC. Dispose of the device through an approved disposal centre or at your community waste facility. Observe the currently applicable regulati...

74 .wav file, See Wave file 3.5 mm jack plug 9, 10, 38, 69 A Access times 52 Ack. beep, See Audio signals Anti-virus programme 61 Audio signals 42, 43 AutoPlay 61 B Background Illumination, See Illumination adjustments Barrel plug, See DC plug Batteries 7, 9, 10, 12, 14, 15, 58, 72, 73 Batteries/rec...