Siemens v1.0 - User Manual

Siemens v1.0

Siemens v1.0 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
Page: / 25

Table of Contents:

  • Page 2 – ProfinetCommander User Manual V1.0; Table of Contents
  • Page 3 – Hardware and Software Requirements; PC with Ethernet port
  • Page 5 – Set the IP address on the PC using the Windows software. Select; Connections; and double-click on the appropriate Ethernet connection.; Select Properties
  • Page 6 – Edit the Station Configuration; in the Windows; Station Name
  • Page 7 – c) Select Index 1 and then use the “Add...” button to add an Application.; Add Application
  • Page 8 – select the appropriate card if more than one exists as shown below.; Select IE General
  • Page 9 – to determine the error.; Configure the PROFINET IO Network; Configuration OK
  • Page 16 – Download the Configuration to the PC Station; b) Download the configuration by selecting the icon shown.
  • Page 18 – Download the PROFINET IO Device Names; ProfinetCommander is not running or HW Config will lock up.; Select Device Name
  • Page 21 – Configuration Display
  • Page 23 – Displaying Diagnostic Alarms; Diagnostic Alarm
  • Page 24 – Reading Diagnostics; Then Call Up Read
Loading the manual

- 1 -








ProfinetCommander

User Manual

V1.0

July 2006










"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - ProfinetCommander User Manual V1.0; Table of Contents

- 2 - ProfinetCommander User Manual V1.0 Table of Contents ProfinetCommander User Manual V1.0 ........................................................................................2 1.0 Version History ...................................................................................................

Page 3 - Hardware and Software Requirements; PC with Ethernet port

- 3 - 2.0 Introduction The PROFI Interface Center (PIC) in Johnson City, Tennessee has created the ProfinetCommander application, which runs as a PROFINET IO controller on a PC with an easy-to-use graphical user interface. With ProfinetCommander, the user can test a PROFINET network and the IO Devic...

Page 5 - Set the IP address on the PC using the Windows software. Select; Connections; and double-click on the appropriate Ethernet connection.; Select Properties

- 5 - Set the IP address on the PC using the Windows software. Select Start->Settings->Network Connections and double-click on the appropriate Ethernet connection. Select the Properties button to bring up the IP Properties screen. Select “Use the following IP address” and enter the IP address ...

Other Siemens Models