Page 3 - Contents
3 Siemens Building Technologies Fire Safety & Security Products 12.2007 Contents 1 Product description ................................................................................ 5 2 Technical data .........................................................................................6 3 ...
Page 5 - Product description; Product; Features; Full report for all the events of the IC60.
Product description 5 Siemens Building Technologies Fire Safety & Security Products 12.2007 1 Product description The IGS6-10 is a GSM add-on modem. It connects to the Sintony bus and can function as a second dialer or backup dialer to the one in the control panel. When an event or alarm takes p...
Page 6 - Technical data; Technical
Technical data 6 Siemens Building Technologies Fire Safety & Security Products 12.2007 2 Technical data Radio frequency Operating frequency 850 MHz, 900 MHz, 1800 MHz, 1900 MHz Output power Class 4 EGSM850: 2 W Class 4 EGSM900: 2 W Class 1 EGSM1800: 1 W Class 1 EGSM1900: 1 W GPRS multi-slot clas...
Page 7 - Connections
Connections 7 Siemens Building Technologies Fire Safety & Security Products 12.2007 3 Connections 1 Status LEDs NET: turns green when there is communication with TCP/IP server. BUS: blinks yellow on BUS communication with control panel. FAIL: Blinks or stable in red on network error (problem wit...
Page 8 - Pre-installation requirements; requirements; account; On opening the account you receive the following:; SIM card; IP of target receiver.
Pre-installation requirements 8 Siemens Building Technologies Fire Safety & Security Products 12.2007 4 Pre-installation requirements 4.1 Cellular account You need to open a cellular account with your cellular service provider to enable the cellular gateway module on your unit. On opening the ac...
Page 9 - Installation; software; Next
Installation 9 Siemens Building Technologies Fire Safety & Security Products 12.2007 5 Installation 5.1 Configuration software 1. Double Click the installation file. Î The InstallShield Wizard opens. 2. Choose the destination location. 3. Click Next . Î The installation starts. 4. After the inst...
Page 10 - Using the paper template drill 4 holes in the wall to mount the unit.
Installation 10 Siemens Building Technologies Fire Safety & Security Products 12.2007 5.2 Unit z Before installing the hardware we strongly recommend that you pre-program the unit. This is done using a PC or a laptop running the configuration program and using the USB cable supplied. z If the GS...
Page 11 - Configure the unit; the; Click the; The following window will open:; OK
Configure the unit 11 Siemens Building Technologies Fire Safety & Security Products 12.2007 6 Configure the unit 6.1 Prerequisites z To ensure reporting disable the setting "No Keypad Indication if Armed": P25E13E 5E in the IC60. z Disable the setting: P168E1-16E 4E in the IC60. z Starti...
Page 12 - methods; Local control via COM; Local control via COM
Configure the unit 12 Siemens Building Technologies Fire Safety & Security Products 12.2007 6.3 Configuration methods There are 2 ways to configure the modem: – Local control via COM : for configuration via local PC (USB). – Control modem via Data Link : for remote configuration via GSM data cal...
Page 13 - Remote mode configuration; Control modem via Data Link
Configure the unit 13 Siemens Building Technologies Fire Safety & Security Products 12.2007 6.3.2 Remote mode configuration Disconnect the master unit (the modem you are dialing from) from the keypad bus of the IC60. Fig. 3 Configuration method: Remote mode configuration Prerequisites: z The SIM...
Page 14 - Available protocols
Configure the unit 14 Siemens Building Technologies Fire Safety & Security Products 12.2007 6.4 Protocols The following protocols can be used simultaneously: Reporting media Reporting format Reporting priority Symbol Section TCP/IP CID 1 6.4.1 GPRS CID 2 6.4.2 GSM SMS 3 6.4.3 If both GSM and TCP...
Page 16 - Internet configuration; Backup
Configure the unit 16 Siemens Building Technologies Fire Safety & Security Products 12.2007 6.4.1 TCP/IP Prerequisites: z APN (see section 4.3: TCP / IP) of your service provider. z Domain name or an IP address. 1. Click the button. Î The window Internet configuration will open: Fig. 4 Internet ...
Page 17 - Independently
Configure the unit 17 Siemens Building Technologies Fire Safety & Security Products 12.2007 Independently If you want the IGS6-10 modem unit to operate independently of the PSTN of the control panel: 4. Uncheck the checkbox Only while PSTN Fail/Dialer Failure! Î The IGS6-10 unit will transmit th...
Page 18 - Events in simple mode
Configure the unit 18 Siemens Building Technologies Fire Safety & Security Products 12.2007 Fig. 5 Events in simple mode There are two modes: z Simple mode: The available events list has only common events (see Fig. 5). z Advanced mode: The available events list has all events (Fig. 6). Fig. 6 E...
Page 19 - Available events list; Contact ID configuration
Configure the unit 19 Siemens Building Technologies Fire Safety & Security Products 12.2007 11. Choose a mode. 12. Double-click an event from the Available events list -OR- Select one and then click the button . Î Multiple events are now shown in the field Events to send . Any one of these event...
Page 20 - configuration; Click the button; SMS configuration; SMS configuration; Entry of APN not required.
Configure the unit 20 Siemens Building Technologies Fire Safety & Security Products 12.2007 6.4.3 SMS configuration 1. Click the button . Î The window SMS configuration opens: Fig. 8 SMS configuration 2. Configure the window SMS configuration as described in section 6.4.1. Exception: – Entry of ...
Page 21 - access; Remote access configuration
Configure the unit 21 Siemens Building Technologies Fire Safety & Security Products 12.2007 6.5 Remote access configuration In this window you can setup the remote configuration. There are 2 security levels: z Only password z Password and telephone number. The telephone number will be used to ge...
Page 22 - Check password and phone number; The window; Add phone number; Enter the phone number.
Configure the unit 22 Siemens Building Technologies Fire Safety & Security Products 12.2007 4. Enter the desired password (max. 14 characters). 5. If the authentication requires a password and a phone number, press the but-ton Check password and phone number . Î The window Add phone number opens...
Page 23 - Fast SMS configuration; Selected protocols
Configure the unit 23 Siemens Building Technologies Fire Safety & Security Products 12.2007 6.6 Fast SMS configuration This is the window to customize the SMS that will be triggered at Input 1. When Input 1 is shorted to ground (pulse), the custom SMS will be sent to the phone number entered in ...
