Page 3 - Contents
Operating Instructions Control Panel SCD 1297-K Page 3 / 31 DOC-Nr.: B4 0003E1.DOC Contents 1. Overview ................................................................................................................... 5 1.1. Layout of this Handbook ....................................................
Page 4 - Figures
Operating Instructions Control Panel SCD 1297-K Page 4 / 31 DOC-Nr.: B4 0003E1.DOC Figures Fig. 2: Connecting the SCD 1297-K to the computer system over a short distance ....................... 16Fig. 3: Connecting the SCD 1297-K to the computer system over a longer distance ..................... 17...
Page 6 - Layout of this Handbook; In detail, the chapters are arranged as follows:
Operating Instructions Control Panel SCD 1297-K Page 6 / 31 DOC-Nr.: B4 0003E1.DOC 1.1. Layout of this Handbook This handbook should be kept within reach when installing and operating the SCD 1297-K. It hasbeen laid out so that even inexperienced users can find the information they require. Chapters...
Page 7 - Warnings and Safety Notes; Transport
Operating Instructions Control Panel SCD 1297-K Page 7 / 31 DOC-Nr.: B4 0003E1.DOC 1.2. Warnings and Safety Notes Transport The LCD monitor should only be transported in its original packaging. This is the only way to ensure itwill be protected against shocks and rough treatment. Setting up When ins...
Page 8 - Electrostatic Shock
Operating Instructions Control Panel SCD 1297-K Page 8 / 31 DOC-Nr.: B4 0003E1.DOC 1.2.1. Instructions for Handling Assemblies Susceptible to Electrostatic Shock Most of the assemblies within the SCD 1297-K contain components which can be destroyedby electrostatic voltages. It is also possible for t...
Page 9 - General Installation; Removal of all packaging; Removal of Packaging and Checking of Individual Parts; The original packaging should be kept for future transportation.
Operating Instructions Control Panel SCD 1297-K Page 9 / 31 DOC-Nr.: B4 0003E1.DOC 2. General Installation Preparation for installing the LCD monitor includes the following points: • Removal of all packaging • Checking of components for damage • Comparison of components received with those on the de...
Page 10 - Installation of the Monitor
Operating Instructions Control Panel SCD 1297-K Page 10 / 31 DOC-Nr.: B4 0003E1.DOC 2.2. Installation of the Monitor The SCD 1297-K is a 19” rack module and is mounted in a standard 19” cabinet. Guide rails are notnecessary. 25 Fig. 1: Dimensions of the SCD 1297-K S I EM EN S Bracket f or mounting t...
Page 12 - Converter
Operating Instructions Control Panel SCD 1297-K Page 12 / 31 DOC-Nr.: B4 0003E1.DOC Thermal Problems In order that the SCD 1297-K maintains an optimum operating temperature while in use, air must beallowed to circulate freely around the enclosure. This is especially important for the rear of the uni...
Page 13 - Interfaces; Pin
Operating Instructions Control Panel SCD 1297-K Page 13 / 31 DOC-Nr.: B4 0003E1.DOC 2.3. Interfaces 2.3.1. VGA-Interface X1 The VGA interface is a standard 15-pin female HD-D-type connector. Pin Signal 1 Video input RED 2 Video input GREEN 3 Video input BLUE 4 Not used 5 Not used 6 GND (RED) 7 GND (...
Page 15 - This female connector is used for updating the SCD 1297-K software.
Operating Instructions Control Panel SCD 1297-K Page 15 / 31 DOC-Nr.: B4 0003E1.DOC 2.3.5. PC Interface Keyboard/Mouse (Long Distance) X27 This interface is used when the computer system and the control panel are separated bymore than 5m. The mouse and keyboard signals are transmitted via a common c...
Page 16 - Connecting to the Computer System; Computer; system; VGA
Operating Instructions Control Panel SCD 1297-K Page 16 / 31 DOC-Nr.: B4 0003E1.DOC 2.3.7. Power Supply X7 / X8 / X9 Power is supplied to the SCD 1297-K via a DC connector, X7, on the rear of the unit. The DC input(12V) has been design to make it impossible to connect the supply voltage the wrong wa...
Page 17 - Electrical Installation
Operating Instructions Control Panel SCD 1297-K Page 17 / 31 DOC-Nr.: B4 0003E1.DOC If the control panel and the computer system are further apart or if there are strong interference fieldsin the vicinity then the second variation using the special interface (long distance, X27) should beused for th...
Page 18 - Operation and Alignment; Location of the Operation and Alignment Controls; Important; Key definition
Operating Instructions Control Panel SCD 1297-K Page 18 / 31 DOC-Nr.: B4 0003E1.DOC 3. Operation and Alignment This chapter contains a description of the operating and alignment functions. 3.1. Location of the Operation and Alignment Controls The operating controls such as the keyboard and mouse are...
Page 19 - Key table for control panel XXY at plant ZYX; Flags; A semi-colon indicates the start of a comment.
Operating Instructions Control Panel SCD 1297-K Page 19 / 31 DOC-Nr.: B4 0003E1.DOC 3.2.2. Key Definition Table Various keywords, characters and syntax are used in the table. The table, which is supplied with thecontrol panel, contains definitions for all of the keys with permanent labels. ; Key tab...
Page 20 - Syntax of a table entry
Operating Instructions Control Panel SCD 1297-K Page 20 / 31 DOC-Nr.: B4 0003E1.DOC Syntax of a table entry X key co-ordinate Y key co-ordinate Key number Flag Comment The individual entries like X key co-ordinate and Y key co-ordinate must be separated by a space. Key co-ordinatesThis matrix co-ord...
Page 21 - Shift
Operating Instructions Control Panel SCD 1297-K Page 21 / 31 DOC-Nr.: B4 0003E1.DOC Protocol 0xEA B1H B1L B2H B2L B3H B3L B4H B4L B5H B5L 0xEA : Special command BxH, BxL : LED Information in ASCII-Hexformat (H= high, L=low) Important: Each of the LED bytes, B1 to B5 is in ASCII hex format, i.e. for ...
Page 22 - Display Alignment; Left mouse button
Operating Instructions Control Panel SCD 1297-K Page 22 / 31 DOC-Nr.: B4 0003E1.DOC 3.3. Integrated Mouse (Finger-mouse) The “finger-mouse” on the front of the control panel fulfils the same function as a standard Microsoft-compatible 2-button mouse. The mouse is moved using the central positioning ...
Page 23 - MENU
Operating Instructions Control Panel SCD 1297-K Page 23 / 31 DOC-Nr.: B4 0003E1.DOC 3.4.2. OSD-Menu The „On Screen Display“ OSD is a menu system, which is shown on the display. With thehelp of OSD and the described controls elements, all adjustments of the monitor areexecutable. There are just 4 key...
Page 24 - Brightnes; Contrast; Function
Operating Instructions Control Panel SCD 1297-K Page 24 / 31 DOC-Nr.: B4 0003E1.DOC 3.4.3. Quick-OSD-Menu-Functions Following adjustments can do via the Quick-OSD-menu: Brightnes Contrast Auto adjust Invoke via key <SET> Function Adjustment/value Description Contrast Range: 0 to 100 via key &l...
Page 27 - Display module; Active colour TFT-LCD; Power Supply; Operating temperature
Operating Instructions Control Panel SCD 1297-K Page 27 / 31 DOC-Nr.: B4 0003E1.DOC 4. Technical Data 4.1. Display module Type Active colour TFT-LCD Diagonal size 30.8 cm (12.1") Display area (WxH) 246.0 x 184.5 mm Resolution 800 x 600 pixels Pitch 0.33 x 0.33 mm² Colours 262144 Backlight 2xCCFT...
Page 28 - Protection; Aluminium
Operating Instructions Control Panel SCD 1297-K Page 28 / 31 DOC-Nr.: B4 0003E1.DOC 4.4. Protection Protection class - front IP65 Protection class - rear IP20 4.5. Enclosure Weight approx. 4.5 kg Enclosure material Aluminium 4.6. Input Signal (Video) Level 0.7Vss RGB analog at 75 Ω Bandwidth 140 MHz...
Page 29 - EU Declaration of Conformity on EMC; Product; EU framework guidelines; Additional Licensing
Operating Instructions Control Panel SCD 1297-K Page 29 / 31 DOC-Nr.: B4 0003E1.DOC 4.7. EU Declaration of Conformity on EMC Product LCD-Monitor SCD 1297-K Test foundations EU framework guidelines No. 89/336/EWG No. 92/031/EWG No. 73/23/EWG No. 93/68/EWG Harmonised standardsused EN 50081-2 (EN55022 ...
