Page 3 - Table of Contents
RUGGEDCOM RSG2200 Installation Guide Table of Contents iii Table of Contents Preface ................................................................................................................ v Alerts ................................................................................................
Page 5 - Preface; Alerts; NOTE; Related Documents
RUGGEDCOM RSG2200 Installation Guide Preface Alerts v Preface This guide describes the RUGGEDCOM RSG2200. It describes the major features of the device, installation, commissioning and important technical specifications.It is intended for use by network technical support personnel who are responsibl...
Page 6 - Training; Customer Support
Preface RUGGEDCOM RSG2200 Installation Guide vi Training For any questions about the documentation or for assistance finding a specific document, contact a Siemens sales representative. Training Siemens offers a wide range of educational services ranging from in-house training of standard courses on...
Page 7 - Introduction; Feature Highlights
RUGGEDCOM RSG2200 Installation Guide Chapter 1 Introduction Feature Highlights 1 Introduction The RUGGEDCOM RSG2200 is a rugged, fully managed, modular Ethernet switch specifically designed to operate reliably in electrically harsh and climatically demanding utility substation, railway and industria...
Page 8 - Ports, Controls and Indicator LEDs
Chapter 1 Introduction RUGGEDCOM RSG2200 Installation Guide 2 Ports, Controls and Indicator LEDs ▪ Exceeds IEC 61850-3 (electric utility substations)▪ Exceeds IEC 61800-3 (variable speed drive systems)▪ Exceeds NEMA TS-2 (traffic control equipment)▪ Exceeds IEC 61000-6-2 (generic industrial environm...
Page 11 - Installing Device; Mounting the Device
RUGGEDCOM RSG2200 Installation Guide Chapter 2 Installing Device Mounting the Device 5 Installing Device The following sections describe how to install the device, including mounting the device, installing/removing modules, connecting power, and connecting the device to the network. DANGER! Electroc...
Page 12 - Mounting the Device to a Rack
Chapter 2 Installing Device RUGGEDCOM RSG2200 Installation Guide 6 Mounting the Device to a Rack The following sections describe the various methods of mounting the device:• Section 2.1.1, “Mounting the Device to a Rack” • Section 2.1.2, “Mounting the Device on a DIN Rail” • Section 2.1.3, “Mounting...
Page 13 - Mounting the Device on a DIN Rail; Mounting the Device to a Panel
RUGGEDCOM RSG2200 Installation Guide Chapter 2 Installing Device Mounting the Device on a DIN Rail 7 Section 2.1.2 Mounting the Device on a DIN Rail For DIN rail installations, the RSG2200 can be equipped with panel/DIN rail adapters pre-installed on each side of the chassis. The adapters allow the ...
Page 14 - Connecting Power
Chapter 2 Installing Device RUGGEDCOM RSG2200 Installation Guide 8 Connecting Power 2 1 1 Figure 4: Panel Mounting 1. Screw 2. Panel/DIN Rail Adaptor 2. Install the supplied screws to secure the adapters to the panel. Section 2.2 Connecting Power The RSG2200 supports single or dual redundant AC and/...
Page 15 - Connecting AC Power
RUGGEDCOM RSG2200 Installation Guide Chapter 2 Installing Device Connecting AC Power 9 • Equipment must be installed according to applicable local wiring codes and standards. The following sections describe how to connect power to the device:• Section 2.2.1, “Connecting AC Power” • Section 2.2.2, “C...
Page 16 - Connecting DC Power
Chapter 2 Installing Device RUGGEDCOM RSG2200 Installation Guide 10 Connecting DC Power 4 2 1 3 4 6 5 7 4 6 5 3 6 5 7 4 6 5 Figure 5: Terminal Block Wiring 1. Screw-Type Terminal Block 2. Pluggable Terminal Block 3. Jumper 4. Positive/Live (+/L) Terminal 5. Negative/Neutral (-/N) Terminal (-/N) 6. S...
Page 18 - Wiring Examples
Chapter 2 Installing Device RUGGEDCOM RSG2200 Installation Guide 12 Wiring Examples Section 2.2.3 Wiring Examples The following illustrate how to connect power to single and dual power supplies. Figure 7: Single AC Power Supply Figure 8: Single DC Power Supply
Page 20 - Connecting the Failsafe Alarm Relay
Chapter 2 Installing Device RUGGEDCOM RSG2200 Installation Guide 14 Connecting the Failsafe Alarm Relay Figure 11: Dual AC/DC Power Supply Section 2.3 Connecting the Failsafe Alarm Relay The failsafe relay can be configured to latch based on alarm conditions. The NO (Normally Open) contact is closed...
Page 21 - Grounding the Device; Connecting to the Device
RUGGEDCOM RSG2200 Installation Guide Chapter 2 Installing Device Grounding the Device 15 1 3 2 Figure 12: Failsafe Alarm Relay Wiring 1. Normally Open 2. Common 3. Normally Closed Section 2.4 Grounding the Device The RSG2200 chassis ground terminal uses a #6-32 screw. It is recommended to terminate ...
Page 22 - Management Port; Cabling Recommendations; Protection On Twisted-Pair Data Ports
Chapter 2 Installing Device RUGGEDCOM RSG2200 Installation Guide 16 Cabling Recommendations Management Port Connect a PC or terminal directly to the management port to access the boot-time control and ROS interfaces. The management port provides access to ROS's console and Web interfaces. IMPORTANT!...
Page 23 - Gigabit Ethernet 1000Base-TX Cabling Recommendations
RUGGEDCOM RSG2200 Installation Guide Chapter 2 Installing Device Gigabit Ethernet 1000Base-TX Cabling Recommendations 17 Siemens also does not recommend using copper Ethernet ports to interface with devices in the field across distances that could produce high levels of ground potential rise (i.e. g...
Page 26 - Copper Ethernet Ports
Chapter 3 Communication Ports RUGGEDCOM RSG2200 Installation Guide 20 Copper Ethernet Ports Section 3.1 Copper Ethernet Ports The RSG2200 supports several 10/100/1000Base-TX Ethernet ports that allow connection to standard Category 5 (CAT-5) unshielded twisted-pair (UTP) cables with either RJ45 male...
Page 27 - Fiber Optic Ethernet Ports; SFP Optic Ethernet Ports
RUGGEDCOM RSG2200 Installation Guide Chapter 3 Communication Ports Fiber Optic Ethernet Ports 21 Name Pin 10/100Base-TX 1000Base-TX Description 6 TX- BI_DA- Transmit Data- or Bi-Directional 7 Reserved (Do Not Connect) 8 Reserved (Do Not Connect) For specifications on the available copper Ethernet po...
Page 28 - Installing an SFP Optical Port
Chapter 3 Communication Ports RUGGEDCOM RSG2200 Installation Guide 22 Installing an SFP Optical Port 2 1 Figure 25: LC Port 1. Tx Connector 2. Rx Connector NOTE SFP modules, as well as their optical ports, can be safely inserted and removed while the chassis is powered and operating. The following s...
Page 29 - Removing an SFP Optical Port
RUGGEDCOM RSG2200 Installation Guide Chapter 3 Communication Ports Removing an SFP Optical Port 23 2 1 Figure 26: Installing an SFP Optical Port (Typical) 1. SFP Optical Port 2. Metal Bail-Latch 5. Remove the dust cover from the port.6. Connect a cable to the port and test the connection. Section 3....
Page 30 - GBIC Optic Ethernet Ports; Installing a GBIC Optical Port
Chapter 3 Communication Ports RUGGEDCOM RSG2200 Installation Guide 24 GBIC Optic Ethernet Ports Section 3.4 GBIC Optic Ethernet Ports GBIC (Gigabit Interface Converter) optic Ethernet ports are available with SC (Standard or Subscriber Connector) connectors. 2 1 Figure 28: SC Port 1. Tx Connector 2....
Page 31 - Removing a GBIC Optical Port
RUGGEDCOM RSG2200 Installation Guide Chapter 3 Communication Ports Removing a GBIC Optical Port 25 2 1 3 Figure 29: Installing a GBIC Optical Port 1. GBIC Optical Port Module 2. GBIC Optical Port 3. Locking Latch 5. Release the latches and make sure the module is locked in place.6. Remove the dust c...
Page 33 - Technical Specifications; Power Supply Specifications; Failsafe Relay Specifications
RUGGEDCOM RSG2200 Installation Guide Chapter 4 Technical Specifications Power Supply Specifications 27 Technical Specifications The following sections provide important technical specifications related to the device and available modules:• Section 4.1, “Power Supply Specifications” • Section 4.2, “F...
Page 34 - Supported Networking Standards; Copper Ethernet Port Specifications; Copper Gigabit Ethernet (1 Gbps) Port Specifications
Chapter 4 Technical Specifications RUGGEDCOM RSG2200 Installation Guide 28 Supported Networking Standards Section 4.3 Supported Networking Standards Standard 10 Mbps Ports 100 Mbps Ports 1000 Mbps Ports Notes IEEE 802.3 10BaseT/10BaseFL IEEE 802.3u ü 100BaseTX/100BaseFX IEEE 802.3x ü ü ü Flow Contro...
Page 35 - Fixed Gigabit Transceivers; SFP Gigabit Transceivers; Fiber Optic Ethernet Port Specifications; 0FL Ethernet Optical Specifications
RUGGEDCOM RSG2200 Installation Guide Chapter 4 Technical Specifications Fiber Optic Ethernet Port Specifications 29 Fixed Gigabit Transceivers Order Code Connector Duplex e Cable Type f Wiring Standard g Maximum Distance h Isolation i CG01 RJ45 FDX/HDX > Category 5 TIA/EIA T568A/B 100 m (328 ft) ...
Page 36 - Gigabit Ethernet (1 Gbps) Optical Specifications
Chapter 4 Technical Specifications RUGGEDCOM RSG2200 Installation Guide 30 Fast Ethernet (10/100 Mbps) Optical Specifications Section 4.5.2 Fast Ethernet (10/100 Mbps) Optical Specifications Order Code Mode Connector Type Cable Type (µm) Tx λ (typ.) (nm) Tx min. (dBm) Tx max. (dBm) Rx Sensitivity (d...
Page 37 - Operating Environment
RUGGEDCOM RSG2200 Installation Guide Chapter 4 Technical Specifications Operating Environment 31 s Typical distance. The maximum segment length is greatly dependent on factors such as fiber quality, and the number of patches and splices. Consult a Siemens sales associates when determining maximum se...
Page 38 - Mechanical Specifications
Chapter 4 Technical Specifications RUGGEDCOM RSG2200 Installation Guide 32 Mechanical Specifications Section 4.7 Mechanical Specifications Parameter Value Dimensions Refer to Chapter 5, Dimension Drawings Weight 4.8 kg (10.6 lbs) Ingress Protection IP40 (1 mm or 0.04 in objects) Enclosure 18 AWG Gal...
Page 43 - Certification; Agency Approvals; FCC Compliance; Industry Canada Compliance
RUGGEDCOM RSG2200 Installation Guide Chapter 6 Certification Agency Approvals 37 Certification The RSG2200 device has been thoroughly tested to guarantee its conformance with recognized standards and has received approval from recognized regulatory agencies.• Section 6.1, “Agency Approvals” • Sectio...
Page 44 - EMI and Environmental Type Tests
Chapter 6 Certification RUGGEDCOM RSG2200 Installation Guide 38 EMI and Environmental Type Tests Section 6.4 EMI and Environmental Type Tests The RSG2200 has passed the following EMI and environmental tests. IEC 61850-3 EMI Type Tests NOTE • In the case of an all fiber port configuration, this produ...
Page 46 - Environmental Type Tests
Chapter 6 Certification RUGGEDCOM RSG2200 Installation Guide 40 EMI and Environmental Type Tests IEEE 1613 (C37.90.x) EMI Immunity Type Tests NOTE The RSG2200 meets Class 2 requirements for an all-fiber configuration and Class 1 requirements for copper ports. Test Description Test Levels Enclosure C...
