Page 3 - Table of Contents
RUGGEDCOM RS8000 Installation Guide Table of Contents iii Table of Contents Preface ................................................................................................................ v Alerts .................................................................................................
Page 5 - Preface; Alerts; Related Documents; Accessing Documentation
RUGGEDCOM RS8000 Installation Guide Preface Alerts v Preface This guide describes the RUGGEDCOM RS8000. It describes the major features of the device, installation, commissioning and important technical specifications.It is intended for use by network technical support personnel who are responsible ...
Page 6 - Training; Customer Support
Preface RUGGEDCOM RS8000 Installation Guide vi Training For any questions about the documentation or for assistance finding a specific document, contact a Siemens sales representative. Training Siemens offers a wide range of educational services ranging from in-house training of standard courses on ...
Page 7 - Introduction; Feature Highlights
RUGGEDCOM RS8000 Installation Guide Chapter 1 Introduction Feature Highlights 1 Introduction The RUGGEDCOM RS8000 provides substation hardened, fully managed, Ethernet switches specifically designed to operate reliably in electrically and environmentally harsh environments.The RS8000’s Zero-Packet-L...
Page 8 - Ports, Controls and Indicator LEDs
Chapter 1 Introduction RUGGEDCOM RS8000 Installation Guide 2 Ports, Controls and Indicator LEDs Cyber Security Features • Multi-level user passwords• SSH/SSL (128-bit encryption)• Enable/disable ports, MAC based port security• Port based network access control (802.1x)• VLAN (802.1Q) to segregate an...
Page 11 - Installing the Device; Mounting the Device
RUGGEDCOM RS8000 Installation Guide Chapter 2 Installing the Device Mounting the Device 5 Installing the Device The following sections describe how to install the device, including mounting the device, installing/removing modules, connecting power, and connecting the device to the network. DANGER! E...
Page 12 - Mounting the Device on a DIN Rail; Mounting the Device to a Rack
Chapter 2 Installing the Device RUGGEDCOM RS8000 Installation Guide 6 Mounting the Device on a DIN Rail Section 2.1.1 Mounting the Device on a DIN Rail To mount the device to a standard 35 mm (1.4 in) DIN rail, do the following: 1. Align the adapters with the DIN rails and slide the device into plac...
Page 13 - Mounting the Device to a Panel
RUGGEDCOM RS8000 Installation Guide Chapter 2 Installing the Device Mounting the Device to a Panel 7 2 11 Figure 3: Rack Mounting 1. Rack Mount Adapter 2. Screw 3. Insert the rack mount adapter and device assembly into the rack. NOTE Since heat within the device is channelled to the enclosure, it is...
Page 14 - Connecting Power
Chapter 2 Installing the Device RUGGEDCOM RS8000 Installation Guide 8 Connecting Power 2 1 1 1 1 2 Figure 4: Panel Mounting 1. Screw 2. Panel/DIN Rail Adaptor 2. Install the supplied screws to secure the adapters to the panel. Section 2.2 Connecting Power The RS8000 supports a single integrated high...
Page 15 - Connecting AC Power; Connecting DC Power
RUGGEDCOM RS8000 Installation Guide Chapter 2 Installing the Device Connecting AC Power 9 • Section 2.2.2, “Connecting DC Power” Section 2.2.1 Connecting AC Power To connect a high AC power supply to the device, do the following: CAUTION! Electrical hazard – risk of damage to equipment. Before testi...
Page 16 - Connecting the Failsafe Alarm Relay
Chapter 2 Installing the Device RUGGEDCOM RS8000 Installation Guide 10 Connecting the Failsafe Alarm Relay This cable connects transient suppression circuitry to chassis ground and must be removed in order to avoid damage to transient suppression circuitry during testing. 1. Connect the positive wir...
Page 17 - Grounding the Device; Connecting to the Device; Serial Console Port
RUGGEDCOM RS8000 Installation Guide Chapter 2 Installing the Device Grounding the Device 11 1 2 3 Figure 7: Failsafe Alarm Relay Wiring 1. Normally Open 2. Common 3. Normally Closed Section 2.4 Grounding the Device The RS8000 chassis ground terminal uses a #6-32 screw. It is recommended to terminate...
Page 18 - Cabling Recommendations
Chapter 2 Installing the Device RUGGEDCOM RS8000 Installation Guide 12 Cabling Recommendations IMPORTANT! The serial console port is intended to be used only as temporary connections during initial configuration or troubleshooting. The serial console port implements RS232 DCE (Data Communication Equ...
Page 21 - Technical Specifications; Power Supply Specifications; Failsafe Relay Specifications
RUGGEDCOM RS8000 Installation Guide Chapter 4 Technical Specifications Power Supply Specifications 15 Technical Specifications The following sections provide important technical specifications related to the device and available modules:• Section 4.1, “Power Supply Specifications” • Section 4.2, “Fa...
Page 22 - Copper Ethernet Port Specifications; Fiber Optic Ethernet Port Specifications; Operating Environment
Chapter 4 Technical Specifications RUGGEDCOM RS8000 Installation Guide 16 Copper Ethernet Port Specifications Section 4.3 Copper Ethernet Port Specifications The following details the specifications for copper Ethernet ports that can be ordered with the RS8000. Speed e Connector Duplex e Cable Type ...
Page 23 - Mechanical Specifications
RUGGEDCOM RS8000 Installation Guide Chapter 4 Technical Specifications Mechanical Specifications 17 Section 4.6 Mechanical Specifications Parameter Value Dimensions Refer to Chapter 5, Dimension Drawings Weight 2.25 kg (5 lbs) Ingress Protection IP40 (1 mm or 0.04 in objects) Enclosure 18 AWG Galvan...
Page 27 - Certification; Agency Approvals; FCC Compliance; Industry Canada Compliance
RUGGEDCOM RS8000 Installation Guide Chapter 6 Certification Agency Approvals 21 Certification The RS8000 device has been thoroughly tested to guarantee its conformance with recognized standards and has received approval from recognized regulatory agencies.• Section 6.1, “Agency Approvals” • Section ...
Page 28 - EMI and Environmental Type Tests
Chapter 6 Certification RUGGEDCOM RS8000 Installation Guide 22 EMI and Environmental Type Tests Section 6.4 EMI and Environmental Type Tests The RS8000 has passed the following EMI and environmental tests. IEC 61850-3 Type Tests Test Description Test Levels Severity Levels Enclosure Contact +/- 8 kV...
Page 29 - Environmental Type Tests
RUGGEDCOM RS8000 Installation Guide Chapter 6 Certification EMI and Environmental Type Tests 23 Test Description Test Levels Severity Levels Signal ports 2 kVAC (Fail-Safe Relay output) DC Power ports 1.5 kVDC Dielectric Strength AC Power ports 2 kVDC Signal ports 5 kV (Fail-Safe Relay Output) DC Po...
