Page 2 - will; could; result in death or serious; qualified personnel; . Qualified personnel
Safety Guidelines This manual contains notes which you should observe to ensure your own personal safety, as well as to protect the product and connected equipment. These notices are marked as follows according to the level of danger: Danger indicates an imminently hazardous situation which, if not ...
Page 3 - iii; Preface; Purpose; Caution; SIMATIC Panel PC 670/870, operating unit equipment manual
SIMATIC KeyTools Operating Instructions iii 1 Preface Purpose These operating instructions are part of the documentation for the SIMATIC Panel PC 670 or the SIMATIC Panel PC 870, respectively (referred to in the following as the Panel PC 670/870). These operating instructions provide the owner/opera...
Page 4 - Preface; Notation; Motor on; Trademarks
Preface Edition 08/03 SIMATIC KeyTools Operating Instructions iv Notation Different font formats simplify orientation within the text: Motor on The text on the screen of the operating unit is displayed in typewriter font. Output Inputs and outputs on the screen of the operating unit are displayed in...
Page 5 - A&D Technical Support; Available worldwide:
Edition 08/03 Preface SIMATIC KeyTools Operating Instructions v A&D Technical Support Available worldwide: Johnson City Nuremberg Beijing SIMATIC Hotline Worldwide (Nuremberg) Technical Support Local Time: 0:00 to 24:00, 365 days Telephone: +49 (0) 5050-222 Fax: +49 (0) 5050-223 E-Mail: adsuppor...
Page 6 - Service & Support in the Internet
Preface Edition 08/03 SIMATIC KeyTools Operating Instructions vi Service & Support in the Internet The SIMATIC Customer Support team offers you substantial additional information about SIMATIC products via its online services: • General current information can be obtained – In the Internet under...
Page 7 - vii; Table of Contents
SIMATIC KeyTools Operating Instructions vii Table of Contents 1 Description of Functions in SIMATIC KeyTools.............................. 1–1 1.1 Keycode Table ......................................................................................... 1–3 1.2 Security Features ..........................
Page 8 - viii
Table of Contents Edition 08/03 SIMATIC KeyTools Operating Instructions viii
Page 9 - Note
SIMATIC KeyTools Operating Instructions 1–1 1 Description of Functions in SIMATIC KeyTools "SIMATIC KeyTools" is a selection of applications for use with Panel PC 670/870 to facilitate adaptation of keycodes sent from the front keyboard. KeyTools consists of the following tools: • Keycode ta...
Page 10 - KeyTools
Description of Functions in SIMATIC KeyTools Edition 08/03 SIMATIC KeyTools Operating Instructions 1–2 Start "KeyTools" by selecting Start → Settings → Control panel, and then opening the application SIMATIC KeyTools . The following window will then open: Figure 1–1 KeyTools window You can f...
Page 11 - Description of Functions in SIMATIC KeyTools; Table; In the group; Keycode table; The following more closely describes these three keycode tables.; Default Panel PC; Keys; Keycodes
Edition 08/03 Description of Functions in SIMATIC KeyTools SIMATIC KeyTools Operating Instructions 1–3 1.1 Keycode Table In the group Keycode table , you can find three radio buttons for various keycode tables that can be sent to the front keyboard. • Default Panel PC • Standard PC compatible • User...
Page 12 - Standard PC Compatible
Description of Functions in SIMATIC KeyTools Edition 08/03 SIMATIC KeyTools Operating Instructions 1–4 Do the following to send the Default Panel PC keycode table to the front keyboard: 1. In the window SIMATIC KeyTools , select the Default Panel PC radio button. 2. Click on the SEND button. 3. In t...
Page 13 - User specific; Editing Keycode Tables; window
Edition 08/03 Description of Functions in SIMATIC KeyTools SIMATIC KeyTools Operating Instructions 1–5 User specific Under User specific , you have the option to edit the keycode tables and send them to the front keyboard. Editing Keycode Tables 1. In the window SIMATIC KeyTools , select the User sp...
Page 14 - Key definition
Description of Functions in SIMATIC KeyTools Edition 08/03 SIMATIC KeyTools Operating Instructions 1–6 5. Load the table You can use a copy of the Default Panel PC or Standard PC compatible keycode tables as a starting point. You will find these in the directory drive:\Siemens\KeyTools\KeyPad_user ....
Page 15 - a A; Name; LShift; Notice
Edition 08/03 Description of Functions in SIMATIC KeyTools SIMATIC KeyTools Operating Instructions 1–7 In the Normal Modus group, you can define which keycode 1 will be sent. In the Alpha Modus group, you can define which keycode 3 will be sent as special characters. The special characters are gener...
Page 16 - Sending Previously Edited keycode Tables; the
Description of Functions in SIMATIC KeyTools Edition 08/03 SIMATIC KeyTools Operating Instructions 1–8 Sending Previously Edited keycode Tables The advantage of this procedure is that it is not necessary to open the "keycode table". In this manner, a keycode table can be sent directly. 1. Pr...
Page 17 - Features; Security Features; Warning
Edition 08/03 Description of Functions in SIMATIC KeyTools SIMATIC KeyTools Operating Instructions 1–9 1.2 Security Features In the factory-delivered condition, the security features of the Panel PC 670/870 are activated. Figure 1–5 Security Features group (see also Figure 1–1) – the "Security f...
Page 18 - Functionality of the Security Features; If one of the; Keys pressed and keycode strings that will be sent; Desired key; Shift and F1; and
Description of Functions in SIMATIC KeyTools Edition 08/03 SIMATIC KeyTools Operating Instructions 1–10 Functionality of the Security Features If one of the Default Panel PC keycode tables is loaded, the front keyboard's controller will send the following character strings when you press a F or S ke...
Page 20 - Multiple-Key Operation; Standard
Description of Functions in SIMATIC KeyTools Edition 08/03 SIMATIC KeyTools Operating Instructions 1–12 Multiple-Key Operation We recommend using the direct key module (order number 6AV7671-7DA00-0AA0) with applications that require multiple-key operation (simultaneous pressing of two or more keys)....
Page 21 - WinCC Hotkey Function; WinCC hotkey function; Keycode string when WinCC hotkey function is deactivated –; Press key; Keycode string when WinCC hotkey function is activated –; START
Edition 08/03 Description of Functions in SIMATIC KeyTools SIMATIC KeyTools Operating Instructions 1–13 1.3 WinCC Hotkey Function The "W inCC hotkey function" is not needed with Windows 98. Figure 1–6 WinCC hotkey function group Some software packages (like the HMI software "WinCC") ...
Page 23 - Appendix; SIMATIC KeyTools
SIMATIC KeyTools Operating Instructions a 2 Appendix The following table provides a listing of all characters that you can enter in the SIMATIC KeyTools window, Keycode table group and the User specific option. The column "Display/Function" lists the character that will be triggered when the...
Page 24 - Appendix
Appendix Edition 08/03 SIMATIC KeyTools Operating Instructions b Name Code (Hex) 0x Check box Display/Function g G 0A – g L Shift/R Shift G h H 0B – h L Shift/R Shift H i I 0C – i L Shift/R Shift I R Alt í R Alt+L Shift/R Shift Í j J 0D – j L Shift/R Shift J k K 0E – k L Shift/R Shift K l L 0F – l L...
Page 28 - R Alt
Appendix Edition 08/03 SIMATIC KeyTools Operating Instructions f Name Code (Hex) 0x Check box Display/Function ` ~ 35 – ` L Shift/R Shift ~ , < 36 – , L Shift/R Shift < R Alt ç R Alt+L Shift/R Shift Ç . > 37 – . L Shift/R Shift > / ? 38 – / L Shift/R Shift ? R Alt ¿ Caps Lock 39 – Caps L...
