Page 5 - Operating Manual
Page 6 - Your training needs
Your training needs . . . The Siemens Nixdorf Training Centers offer you a wide range of training courses ininformation technology and on IT products and other subjects - onsite near to yourworkplace or offsite at one of our training centers. Contact us for information on consulting, course schedule...
Page 7 - Contents
A26361-K472-Z100-2-5E19 English Contents Introduction .............................................................................................................. 1 Explanation of symbols .................................................................................... 2 Important notes ..........
Page 9 - Introduction
A26361-K472-Z100-2-5E19 English - 1 Introduction Your new MCM 1755 NTD color monitor possesses a whole range of usefulfeatures and functions, e. g.: • 17" (40 cm) high-resolution CRT (0.28 mm dot pitch) • automatic scanning of all horizontal frequencies from 30 to 69 kHz and allrefresh rates (ve...
Page 10 - Explanation of symbols
Color monitor MCM 1755 NTD 2 - English A26361-K472-Z100-2-5E19 Explanation of symbols The meanings of the symbols and fonts used in this manual are as follows: ! Pay particular attention to texts marked with this symbol. Failure toobserve this warning endangers your life, destroys the system, or may...
Page 11 - Important notes; Safety
Color monitor MCM 1755 NTD A26361-K472-Z100-2-5E19 English - 3 Important notes In this chapter you will find information regarding safety which is essential to takenote of with your monitor. The chapter also contains information on the licensesissued for your equipment. Safety This device complies w...
Page 13 - Note on RFI suppression
Color monitor MCM 1755 NTD A26361-K472-Z100-2-5E19 English - 5 Manufacturer's notes Energy Star The Siemens Nixdorf multiscan color monitor MCM 1755NTD is designed to conserve electricity by dropping to lessthan 15 W when it goes into suspend mode and to less than5 W when it goes into OFF mode. With...
Page 15 - FCC Class B Compliance Statement; Important note on power cable
Color monitor MCM 1755 NTD A26361-K472-Z100-2-5E19 English - 7 FCC Class B Compliance Statement If there is an FCC identifier on the device, then:The following statement applies to the products covered in this manual, unlessotherwise specified herein. The statement for other products will appear in ...
Page 17 - Disposal and recycling
Color monitor MCM 1755 NTD A26361-K472-Z100-2-5E19 English - 9 Power cable for devices distributed in the US and Canada In the United States and Canada the cord set must also be UL-listed and CSA-labelled. The voltage rating should be min. 250 volts a.c. Please consult the following table for the se...
Page 18 - Checking the contents of the consignment
Color monitor MCM 1755 NTD 10 - English A26361-K472-Z100-2-5E19 Checking the contents of the consignment Ê Unpack all the individual parts. Ê Check the consignment for damage incurred during transport. Ê Check whether the consignment agrees with the details in the delivery note.A complete consignmen...
Page 19 - Installing an ergonomic video workstation
Color monitor MCM 1755 NTD A26361-K472-Z100-2-5E19 English - 11 Installing an ergonomic video workstation Before you set up your equipment you should select a suitable position for workingat the monitor. Please observe the following advices when installing a videoworkstation. Window Avoid direct and...
Page 20 - Connecting the monitor
Color monitor MCM 1755 NTD 12 - English A26361-K472-Z100-2-5E19 Connecting the monitor See your PC's operating manual for details of the connectors on the system unit. ! Please note the information provided in the chapter " Safety " at the beginning of this manual. Do not cover the ventilati...
Page 22 - Operation of the monitor; Switching the monitor on; Switching the monitor off
Color monitor MCM 1755 NTD 14 - English A26361-K472-Z100-2-5E19 Operation of the monitor 1 2 3 1 = Control panel with buttons for screen setting (underneath the cover) 2 = Power lamp3 = ON/OFF switch Switching the monitor on Ê Press the ON/OFF switch (3). The power lamp (2) lights up green when the ...
Page 23 - Notes on power management
Color monitor MCM 1755 NTD A26361-K472-Z100-2-5E19 English - 15 Notes on power management If your PC has a VESA DPMS (Video Electronics Standard Association, DisplayPower Management Signaling) power management function (energy-savingmode), your monitor will fully support this function. The monitor h...
Page 24 - Changing the monitor settings
Color monitor MCM 1755 NTD 16 - English A26361-K472-Z100-2-5E19 Changing the monitor settings With the buttons and controls on the control panel, you can change the monitorsettings. Ê Open the cover of the control panel by pressing on the arrow and pulling thecover slightly downward. 7 8 9 1 2 3 4 5...
Page 26 - Activating the factory settings
Color monitor MCM 1755 NTD 18 - English A26361-K472-Z100-2-5E19 COLORTEMP. Setting the color temperaturePress the Color temperature button once.Use arrow button or to select color temperature 6500 K or 9300 K. Activating the factory settings Factory settings are provided for picture size, picture po...
Page 27 - Displaying stored settings
Color monitor MCM 1755 NTD A26361-K472-Z100-2-5E19 English - 19 Displaying stored settings You can have information about the stored settings displayed in a window. If nobutton is pressed for several seconds the window will be masked out and thepower lamp will glow green again. Press the Position bu...
Page 28 - Notes on ergonomic color adjustment
Color monitor MCM 1755 NTD 20 - English A26361-K472-Z100-2-5E19 Notes on ergonomic color adjustment If you select colors for the display in your application programs, take note of theinformation below. The primary colors blue and red on a dark background do not produce theminimum required contrast o...
Page 29 - Cleaning the monitor; Transporting the monitor
Color monitor MCM 1755 NTD A26361-K472-Z100-2-5E19 English - 21 Cleaning the monitor ! Always pull out the power plug before you clean the monitor. Do not clean any interior parts yourself, leave this job to a servicetechnician. Do not use any cleaning agents that contain abrasives or may corrodepla...
Page 32 - Preset operating modes; Tilting and turning area
Color monitor MCM 1755 NTD 24 - English A26361-K472-Z100-2-5E19 Preset operating modes The monitor is preset to the following modes at the factory: Horizontal frequency Refresh rate Resolution 31.5 kHz ± 0.5 kHz 31.5 kHz ± 0.5 kHz 43.3 kHz ± 0.5 kHz 37.8 kHz ± 0.5 kHz 50.6 kHz ± 0.5 kHz 53.7 kHz ± 0...
Page 34 - Error handling
Color monitor MCM 1755 NTD 26 - English A26361-K472-Z100-2-5E19 Error handling If an error occurs, first check the points listed below. If you cannot solve theproblem, please contact our customer service. The display is too small or not centered The monitor recognizes an undefined mode. Ê Adjust the...
