Siemens EH679MN27E - User Manual

6 Unsuitable pans Never use diffuser hobs or pans made from: ■ common thin steel ■ glass ■ earthenware ■ copper ■ aluminium Characteristics of the pan base The characteristics of the pan base may affect the uniformity of the cooking results. Pans made from materials which help diffuse heat, such as ...

7 The hotplates Residual heat indicator The hob has a residual heat indicator for each hotplate to show those which are still hot. Avoid touching them when this indicator is lit. Although the hob is switched off, the indicator œ or • will remain on for as long as the hotplate is hot.If the pan is re...

9 Frying function This function is used for frying, automatically regulating the temperature of the pan.The hotplates equipped with this function are on the right side or lower right-hand side, depending on the model, (see image). Deep-frying features The hotplate only heats when necessary. This way...

10 Table The table shows which temperature setting is suitable for each type of food. The cooking time may vary according to the type, weight, thickness and quality of the food.The heat setting selected depends on the type of pan used. Temperature setting Total cooking time after audible signal soun...

11 Frying programs These programmes should only be used with pans recommended for the frying function.The following food can be prepared using these programmes: Selecting the desired program Select the hotplate: 1. Press the ˜ symbol. ‹ lights up in the hotplate display. ˜ lights up in the time prog...

12 Adding more cookware Press the þ symbol. The new pan will be detected and the previously selected power level will be maintained. Note: If the pan on the hotplate that is switched on is moved or removed, the hob will perform an automatic search and the previously selected power level will be main...

13 After a few seconds, the cooking time begins to elapse. Note: The same cooking time can be automatically programmed for the all the hotplates. The programmed time passes independently for each of the hotplates.The Basic settings chapter provides information on automatically programming the cookin...

14 Basic settings The device has several basic settings. These settings may be adapted to the user's individual needs. Accessing the basic settings The hob should be turned off. 1. Switch on the hob with the main switch. 2. Within the next 10 seconds, press and hold the 0 symbol for 4 seconds. In th...

15 Care and cleaning The advice and warnings contained in this section aim to guide you in cleaning and maintaining the hob, so that it is kept in the best possible condition Hob Cleaning Clean the hob after each use. This prevents food remains left on the surface from burning. Wait until the hob is...

16 Normal noise while the appliance is working Induction heating technology is based on the creation of electromagnetic fields that generate heat directly at the base of the pan. Depending on how the pan has been manufactured, certain noises or vibrations may be produced such as those described belo...

17 Tested dishes This table has been prepared for assessment institutions to provide controls for our appliances.The data in the table refers to our Schulte-Ufer cookware accessories (4 piece cookware set for the HZ 390042 induction hob) with the following measurements: ■ Saucepan Ø 16 cm, 1.2 l for...