Siemens EF 741 Series - User Manual
Siemens EF 741 Series – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Functions; Application Description; Operating software
- Page 3 – Equipment combinations; * only RXB... with KNX logo; Number of plants
- Page 4 – PC component
- Page 5 – Type of system; Technical design
- Page 7 – The user-defined popcards offer the following features:
- Page 8 – Trend logging can be printed out and exported as an ASCII file.
- Page 9 – files to be copied from the central unit or its memory card to the PC
- Page 11 – Commissioning Report
- Page 12 – Alarm software
- Page 13 – The system report is used to monitor plant operation.
- Page 14 – General functions
- Page 16 – Commissioning notes; Telephone connection; 002 Siemens Building Technologies AG
CE1N5647en
22.11.2005
Building Technologies
HVAC Products
5
647
CD V5.0 or higher
Plant Operating Software
ACS741
Operating, service and alarm software
PC software for the remote operation, monitoring and commissioning of heating,
ventilation and district heating plant and remote readout of consumption data.
Windows version
Use
•
Remote management with the OZW775 and OZW771 central communication units:
−
Remote operation and monitoring of Synco™ plants whose devices (primary con-
troller, single room controllers, room units) are connected via Konnex bus
•
Remote management with the OCI600 and OCI611 central communication units:
−
Remote operation and monitoring of heating plant whose devices (controllers,
pulse adapters, temperature sensors/adapters, digital input modules and relay
modules) are connected via LPB (Local Process Bus)
•
Remote management with the M-bus central units OZW10 and OZW111:
−
Remote operation and monitoring of M-bus-compatible devices (controllers and
meters) in community and district heat substations
−
Acquisition of consumption data of M-bus-compatible meters for consumption cost
billing
−
Acquisition of consumption data from radio-based consumption meters of the
Siemeca™ AMR system, transmitted to the M-bus central unit OZW10 via the M-
bus interface of the WTX16 or WTT16 network node
•
Diagnosis and commissioning of LPB controllers with OCI69 and OCI700 service in-
terfaces
•
Diagnosis and commissioning of KNX controllers with OCI700 service interface
•
Reception of alarms in plants with OZW30 and OCI55
.
.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2/16 Building Technologies Plant Operating Software ACS741 CE1N5647en HVAC Products 22.11.2005 Functions The operating software provides a number of applications, depending on the selected software package. Application Description Plant Diagram user-defined Visualization and remote operation of data...
3/16 Building Technologies Plant Operating Software ACS741 CE1N5647en HVAC Products 22.11.2005 The functions are dependent on the type of central unit or the type of service interface. Type of central unit / service interface Function OZW775 OZW771 OCI600 OCI611 OZW10 3) OZW111 OZW30 OCI55 OCI69 OCI...
4/16 Building Technologies Plant Operating Software ACS741 CE1N5647en HVAC Products 22.11.2005 PC component Minimum requirement Hard disk 1.9 GB free memory (Windows XP) 2.0 GB with 1.0 GB free memory (Windows 2000) Recommended: additional 20 MB free memory per plant ... Screen VGA standard driver 8...
