Siemens D1170 - User Manual

A26361-D1170-Z180-4-7619 1 Introduction i This system board is available in different configuration levels. Depending on thehardware configuration of your device, it may be that you cannot find several options inyour version of the system board, even though they are described. You may find further i...

Features 2 A26361-D1170-Z180-4-7619 Features The table shows an assembly version of this system board as example. Function D1170-A Processor socket PGA 370 Processor Intel Celeron or Pentium III Formfactor µ ATX Front Side Bus in MHz 66/100/133 Chipset i810e Memory sockets 2 DIMM ISA slots - - PCI s...

Mechanics A26361-D1170-Z180-4-7619 3 Mechanics Layout ATX 12"' x 8'' (304,8 mm x 203,2 mm) Some of the following connectors are optional and may therefore not be included on your systemboard. 1 6 2 5 7 3 4 8 9a 9b 9c AGP PC I 5 PC I 2 PC I 1 PC I 3 PC I 4 1 = PS/2 keyboard port2 = PS/2 mouse por...

Mechanics A26361-D1170-Z180-4-7619 5 Connectors and jumpers Some of the following connectors are optional! Power supply monitoring 1 Pin Signal 1 AC Outlet (high asserted) 2 PS Fan Control (high asserted) 3 PS FAN pulse 4 PS FAN pulse 5 SMB CLK 6 SMB DATA 7 VCC EEPROM (+3.3 V) 8 GND Power supply ATX...

Mechanics 6 A26361-D1170-Z180-4-7619 Front panel connector 12 HD-LED 1) 1) Cable is not included in the delivery scope.2) The same interface. Power On LED 1) Power On/Off SCSI LED Input 2) 1) Reset 1) Message LED 1) Speaker 2) Sleep 1) Pin Signal Pin Signal 1 Not connected 2 Speaker 3 Standby LED (A...

Mechanics 10 A26361-D1170-Z180-4-7619 Fan 3 1 Pin Signal 1 GND 2 Controlled fan voltage (0 V, 6 ... 12 V) 3 FAN sense USB chipcard reader 1 2 Pin Signal Pin Signal 1 +3.3 V standby 2 VCC 3 Data negative up 4 Data positive up 5 Data negative down 6 Data positive down 7 GND 8 GND 9 Not connected 10 +5...

Mechanics A26361-D1170-Z180-4-7619 11 Configuration Functions controlled by the switch block Function SW1 PWS SW2 RCV SW3 FWP SW4 AUX Password Skip on X X X Off off X X X Recovery BIOS X on X X Off X off X X Floppy write protect X X on X Off X X off X RTC - Reset and Clear CMOS* X X X on Off X X X o...

Mechanics 12 A26361-D1170-Z180-4-7619 ACPI wakeup possibilities Wakeup source Wakeup possible from system states Power button S1 – S5 Keyboard button S1 – S5 RTC (real-time clock = timer) S1 – S4 Serial chipcard reader S1 – S4 External serial port 1 (ring signal) S1 – S4 PCI-card PME# signal S1 – S4...

Mechanics A26361-D1170-Z180-4-7619 13 Messages The Message LED (frontpanel connector) shows two different states: • A slow blinking (once a second) of the LED signals that any application has received amessage. (ACPI- mode) • A fast blinking (five times a second) of the LED signals a hardware proble...

Documentation 14 A26361-D1170-Z180-4-7619 Documentation Ê Insert the "Drivers & Utilities" CD. Ê If the CD does not start automatically, run the START.EXE file in the main directory of the CD. Ê Select your system board or your device. Ê Select Documentation . Ê Select - Technical Manual...

Upgrading main memory A26361-D1170-Z180-4-7619 15 Upgrading main memory These slots are suitable for 64 to 512 Mbyte RDRAM memory modules of the RIMM format. Thepermissible total size of the main memory is 1 Gbyte. Memory modules with different memory capacities can be combined. ! All locations must...

Troubleshooting 16 A26361-D1170-Z180-4-7619 Troubleshooting Message BIOS update The System BIOS provides optimum support for the processor you have chosen. If the message BIOS update for installed CPU failed appears the microcode required for the processor inserted must still be loaded. Further info...