Page 2 - Software License and Limited Warranty
Software License and Limited Warranty © Copyright 2004, Siemens Subscriber Networks, Inc. All rights reserved. Printed in the U.S.A. Siemens Subscriber Networks, Efficient Networks, the Efficient Networks logo, and SpeedStream(tm) are trademarks of Siemens AG. All other names may be trademarks, serv...
Page 4 - SIEMENS; Table of Contents; Chapter 1 Product Specifications
SIEMENS 5930/5935 Business GatewayUser’s Guide SIEMENS i Table of Contents Chapter 1 Product Specifications Front Panel for 5930 .................................................................................................................................... 1Back Panel for 5930 ....................
Page 5 - Chapter 2 Installation
SIEMENS 5930/5935 Business GatewayUser’s Guide SIEMENS ii Security ........................................................................................................................................... 8 Chapter 2 Installation Installation Requirements..............................................
Page 6 - Chapter 6 Security Setup
SIEMENS 5930/5935 Business GatewayUser’s Guide SIEMENS iii Configure QoS Policy .................................................................................................................... 43Reorder QoS Policies....................................................................................
Page 7 - Chapter 1; Product Specifications; Light
SIEMENS 1 Chapter 1 Product Specifications Front Panel for 5930 The following table explains the LEDs that appear on the front panel of the Siemens 5930 Business Gateway. Back Panel for 5930 The following table describes the various connections on the back panel of the Siemens 5930 Business Gateway....
Page 8 - Hardware Specifications for 5930
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 1 Product Specifications Hardware Specifications for 5930 SIEMENS 2 Hardware Specifications for 5930 Physical Specifications • Dimensions:– 11.75W x 6D x 2.25H inches– 29.8W x 15.2D x 5.7H cm • Weight:– 1.5 lbs.– .68 Kg. Operational Environment ...
Page 9 - Software Specifications
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 1 Product Specifications Software Specifications for 5930 SIEMENS 3 Software Specifications for 5930 Bridging • Transparent bridging including Spanning Tree protocol (IEEE 802.1D) • Bridge filters Configuration Management • Easy Setup Web Manage...
Page 10 - Security
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 1 Product Specifications Software Specifications for 5930 SIEMENS 4 PPP (RFC 1661) • Data compression of up to 4:1 (STAC™ LZS) (RFC 1974) • Van Jacobsen header compression (RFC 1144) • Spoofing and filtering (IP-RIP, IPX-RIP, SAP, Watchdog, seri...
Page 12 - Hardware Specifications for 5935; Consumption:10W maximum
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 1 Product Specifications Hardware Specifications for 5935 SIEMENS 6 Hardware Specifications for 5935 Physical Specifications • Dimensions:– 11.75W x 6D x 2.25H inches– 29.8W x 15.2D x 5.7H cm • Weight:– 1.5 lbs.– .68 Kg. Operational Environment ...
Page 13 - Software Specifications for 5935; Bridging
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 1 Product Specifications Software Specifications for 5935 SIEMENS 7 Software Specifications for 5935 Bridging • Transparent bridging including Spanning Tree protocol (IEEE 802.1D) • Bridge filters Configuration Management • Easy Setup Web Manage...
Page 14 - IP Address Translation
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 1 Product Specifications Software Specifications for 5935 SIEMENS 8 IP Address Translation • Network renumbering (RFC 1631) • Network Address Translation (NAT/PAT) • LAN servers supported with NAT • Support for NAT inside an IPSec tunnel Protoco...
Page 15 - Chapter 2; Installation; Installation Requirements; Package Contents
SIEMENS 9 Chapter 2 Installation This chapter describes the steps you must take to install and configure the various components in your network to utilize the Siemens Business Gateway. This includes setting up the hardware connections to the Internet router, configuring the PC to use the Internet ro...
Page 16 - Network Service Provider Requirements; DNS address
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 2 Installation Installation Requirements SIEMENS 10 Network Service Provider Requirements Your Network Service Provider will provide you with information to configure your router’s WAN connection. Depending upon the type of service that you orde...
Page 17 - Hardware Installation; PC Configuration
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 2 Installation Hardware Installation SIEMENS 11 Hardware Installation You may position the Siemens broadband router at any convenient location where it will be well ventilated. Do not stack it with other devices or place it on the carpet. You ca...
Page 18 - Configuration; tab on the Network window.; Properties; option is selected. This is the default Windows; OK; to close each dialog.
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 2 Installation PC Configuration SIEMENS 12 PC Configuration Your PC must be configured to use the TCP/IP protocol suite over the Internet, and to accept Dynamic Host Configuration Protocol address assignments from the router. Although this is th...
Page 19 - Windows NT 4; from the
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 2 Installation PC Configuration SIEMENS 13 Windows NT 4 1. On your desktop, right click on the Network Neighborhood icon. This displays the Network window. 2. Click the Protocols tab. 3. Select TCP/IP Protocol from the Network Protocols list. 4....
Page 21 - Windows XP; Local Area Connection; Configure the router
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 2 Installation PC Configuration SIEMENS 15 Windows XP 1. Click Start >Control Pane l. This displays the Control Panel window. 2. Double-click the Network Connections icon. This displays the Network Connection window. 3. Right-click Local Area...
Page 22 - Ethernet; Connect via; Configure
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 2 Installation PC Configuration SIEMENS 16 Mac OS 9.x 1. Click Apple -> Control Panels -> TCP/IP . This displays the TCP/IP Control Panel window. 2. Select Ethernet from the Connect via drop-down menu. 3. Select Using DHCP Server from the ...
Page 23 - Mac OSX
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 2 Installation PC Configuration SIEMENS 17 Mac OSX 1. Click Apple -> System Preferences . This displays the System Preferences window. 2. Double-click the Network icon under the Internet & Network section. This displays the Network window...
Page 24 - Linux; To update the system status, ensure that the
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 2 Installation PC Configuration SIEMENS 18 Linux 1. From a terminal window, run linuxconfig . This displays the Config window. 2. Click the Adaptor tab. 3. Enter any information specified by your service provider in the fields under the appropri...
Page 25 - Configuring the Router; Establish Connection; Address
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 2 Installation Configuring the Router SIEMENS 19 Configuring the Router The Siemens Business Class Router family of products provides two user interfaces: a Web Management Interface and a console-based Command Line Interface (CLI). The Web Manag...
Page 26 - Router Information Page; Router Information
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 2 Installation Configuring the Router SIEMENS 20 Router Information Page The Router Information Page is the first page you encounter after logging into the router. The Router Information page displays basic router information and configuration s...
Page 27 - Chapter 3; Easy Setup; Access Easy Setup Wizard; Point-to-Point Protocol over Ethernet over RFC1483
SIEMENS 21 Chapter 3 Easy Setup This chapter describes how to define router configuration settings using the Easy Setup Wizard. These settings control access to the Wide Area Network (WAN) and Local Area Network (LAN). During the Easy Setup procedure, you will be prompted to specify configuration pa...
Page 29 - Point-to-Point Protocol over Ethernet over PPPoA; Dynamic Host Configuration Protocol
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 3 Easy Setup Select Protocol SIEMENS 23 Point-to-Point Protocol over Ethernet over PPPoA If you selected Point-to-Point Protocol over Ethernet over PPPoA from the Wan Interface page, the Point- to-Point Protocol over Ethernet over PPPoA page is ...
Page 33 - Optionally select
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 3 Easy Setup Select Protocol SIEMENS 27 Dynamic Host Configuration Protocol Dynamic Host Configuration Protocol (DHCP) provides a dynamic, “upon request,” IP address to computers and other networked devices. The router can act as a DHCP server f...
Page 34 - Local Area Network Configuration; To configure the Local Area Network:; IP Address; traffic should be forwarded to the WAN.; Save and Reboot; . The router will reboot with the new configuration settings.
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 3 Easy Setup Select Protocol SIEMENS 28 Local Area Network Configuration Local Area Network configuration information is configured on the LAN IP Configuration page. To configure the Local Area Network: 1. In IP Address , enter the network addre...
Page 35 - Chapter 4; User Setup; User Management
SIEMENS 29 Chapter 4 User Setup This chapter describes how to set up users on the router and control their access to router functions and to the Internet. The features that control users and their access are listed below. To access one of these options, click the link on the left navigation pane of ...
Page 36 - Adding/Modifying A User Account; Management Classes
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 4 User Setup User Management SIEMENS 30 Adding/Modifying A User Account User accounts are used to control access to the router and the Internet. To add a user account: 1. Click New User on the User Management page. This displays the Add/Modify U...
Page 37 - Deleting A User Account; To delete a user account:; Select User; list on the User Management page,; Delete User; to confirm the account deletion.
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 4 User Setup User Management SIEMENS 31 Deleting A User Account To delete a user account: 1. Select the name of the account you want to delete in the Select User list on the User Management page, then click Delete User . 2. When prompted, click ...
Page 38 - User Lookup
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 4 User Setup User Management SIEMENS 32 User Lookup You can specify a primary and secondary database to use to identify users when logging into the router. To configure the primary and secondary databases: 1. Click User Lookup Config on the left...
Page 39 - Secure Mode Configuration
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 4 User Setup User Management SIEMENS 33 Secure Mode Configuration You can enable secure mode to control whether an interface is trusted or untrusted. To configure Secure Mode: 1. Click Secure Mode Configuration on the left navigation pane of the...
Page 40 - Configure the Radius Server
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 4 User Setup User Management SIEMENS 34 Configure the Radius Server Remote Authentication Dial In User Service (RADIUS) is client-server based access control and authentication feature. The RADIUS client resides locally on the router and works i...
Page 41 - Configure the TacPlus Server
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 4 User Setup User Management SIEMENS 35 Configure the TacPlus Server Tacplus allows access control and user authentication to be managed from a remote server.To configure the Tacplus Server: 1. Click Configure Tacplus Server on the left navigati...
Page 42 - Class
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 4 User Setup User Management SIEMENS 36 Management Classes All system operations, are partitioned into functional groups called management classes. Management classes group functions into the following categories. Class Functional Areas Voice Vo...
Page 43 - Change Password
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 4 User Setup Change Password SIEMENS 37 Change Password User passwords are changed from the Change Password page. To change a user password: 1. Click Change Password from the left navigation pane on the Router Information page. This displays the...
Page 44 - Access Control; To set Access Control parameters:
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 4 User Setup Access Control SIEMENS 38 Access Control Restrict administrative control of the router to a specific set of IP addresses on the Access Control page. Each remote access method (Telnet, Web, and SNMP) can be configured separately. To ...
Page 45 - Chapter 5; Advanced Setup; Set the date and time on your router.
SIEMENS 39 Chapter 5 Advanced Setup This chapter describes how to configure advanced features on the router. Advanced features are listed below. To configure one of these features, click the link on the left navigation pane of the Router Information page. Router Clock Set the date and time on your r...
Page 46 - Router Clock
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 5 Advanced Setup Router Clock SIEMENS 40 Router Clock Use the Router Clock option to set the date and time on the router. To set the current date and time on the router: 1. Click Router Clock on the left navigation pane of the Router Information...
Page 47 - DHCP
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 5 Advanced Setup DHCP SIEMENS 41 DHCP DHCP (Dynamic Host Configuration Protocol), is a TCP/IP service protocol that provides dynamic leasing of IP addresses and other configuration information to client hosts on the network. The router can act a...
Page 48 - QoS; Select one of the following from
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 5 Advanced Setup QoS SIEMENS 42 QoS Quality of Service (QoS) actively manages network resources to sustain service levels for priority applications. To configure QoS: 1. Click QoS in the left navigation pane of the Router Information page. This ...
Page 49 - Configure QoS Policy
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 5 Advanced Setup QoS SIEMENS 43 Configure QoS Policy QoS policies control how QoS manages network resources. To configure a QoS policy: 1. Click QoS Policy Page from the left navigation pane of the QoS Configuration page. This displays the QoS P...
Page 51 - Reorder QoS Policies; To move a QoS policy:
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 5 Advanced Setup QoS SIEMENS 45 Reorder QoS Policies To move a QoS policy: 1. On the QoS Policy Setting page, select the policy you want to move in the IP Policy List drop-down menu and click Move . This expands the QoS Policy Setting page. 2. T...
Page 52 - To configure additional routing tables:; Routing Table Configuration; on the left navigation pane of the Router Information page. This; Interface; drop-down menu, select the interface you want to configure.; Select; . This displays the Remote File Setup page.; Save
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 5 Advanced Setup Routing Table Configuration SIEMENS 46 Routing Table Configuration Every host has a default routing table that it uses to determine which physical interface address to use for outgoing IP traffic. The router supports virtual rou...
Page 53 - Dial Backup; Internal Modem
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 5 Advanced Setup Dial Backup SIEMENS 47 Dial Backup Use the Dial Backup option to configure a backup connection to the Internet through an internal V.90 (model 5835 only) or an external asynchronous modem connected to the console port. This back...
Page 55 - External Modem
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 5 Advanced Setup Dial Backup SIEMENS 49 External Modem The following Dial Backup Configuration page is displayed during Dial Backup configuration if you selected External Modem for the connection. To configure the external modem for dial backup:...
Page 56 - To manage the switches using the web interface, click; Switch Management; on the left navigation pane of the
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 5 Advanced Setup Switch Management SIEMENS 50 Switch Management Each router provides four or eight Ethernet 10/100 switching ports for connection to the local area network (LAN). These RJ-45 ports are located on the rear panel and have individua...
Page 57 - Switch Mirror Configuration; To configure port traffic mirroring:
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 5 Advanced Setup Switch Management SIEMENS 51 Switch Mirror Configuration The router supports traffic mirroring on the Ethernet switch. This means that Ethernet traffic from any of the Ethernet ports is mirrored to a target port for analysis. Th...
Page 58 - Switch Age Time; To configure Switch Age Time:; Aging Time Configuration; Switch Aging Time Configuration page.; Apply
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 5 Advanced Setup Switch Management SIEMENS 52 Switch Age Time The Switch Age Time specifies the aging time of the switch. When the age time expires, the port MAC address entry is removed from the table containing this information. To configure S...
Page 59 - To configure Traffic Shaping:; Traffic Shaping; or; ATM Traffic Shaping; from the left navigation pane of the Router Information; Please select an interface
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 5 Advanced Setup ATM Traffic Shaping SIEMENS 53 ATM Traffic Shaping An ATM network provides Virtual Path (VP) or Virtual Circuit (VC) connections with distinct levels of service. ATM Traffic Shaping defines the level of service to use for each c...
Page 61 - Command Line Interface; the Execute a CLI command page.; Execute; . The response will be displayed in the Output Window.
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 5 Advanced Setup Command Line Interface SIEMENS 55 Command Line Interface Use the Command Line Interface option to use the web interface to enter CLI commands. (Refer to the Command Line Interface Guide for available commands.) To execute a CLI ...
Page 62 - Chapter 6; Security Setup; Start an IPSec session.
SIEMENS 56 Chapter 6 Security Setup This chapter describes how to configure security features on the router. Security features are listed below. To configure one of these features, click the link on the left navigation pane of the Router Information page. NAT Network Address Translation provides a l...
Page 63 - NAT
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup NAT SIEMENS 57 NAT Network Address Translation (NAT) provides a level of security by hiding the private IP addresses of your LAN behind the single public IP address of your router. All connections pass through the router and are...
Page 64 - SNMP; community
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup SNMP SIEMENS 58 SNMP Simple Network Management Protocol (SNMP) exchanges messages between a management client and a management agent. Messages contain requests to get and set variables that exist in network nodes, thus allowing ...
Page 65 - SNMP IP Filter; , enter the first IP address in the range to be filtered.; SNMP Password
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup SNMP SIEMENS 59 SNMP IP Filter Activating an IP Filter range will limit SNMP requests to only those that originate from the designated addresses or LAN. To activate IP filtering: 1. Click SNMP IP Filter from the SNMP Configurati...
Page 66 - To access the Secure Shell configuration pages, click; Secure Shell; from the left navigation pane on the
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup Secure Shell SIEMENS 60 Secure Shell Secure Shell (SSH) secures network services over an insecure network such as the public Internet. The objective of SSH is to make a secure functional equivalent for telnet. Telnet connections...
Page 67 - Configure SSH; Key Generator
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup Secure Shell SIEMENS 61 Configure SSH To configure Secure Shell settings: 1. Click Configure SSH from the Secure Shell (SSH) Configuration List page. This displays the Configure Secure Shell (SSH) page. 2. For Status , select En...
Page 68 - Load Keys
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup Secure Shell SIEMENS 62 Load Keys Diffie-Hellman is the key exchange system used for authentication in the establishment and maintenance of SSH connections. The key exchange requires a Public Key and a Private Key. This key pair...
Page 69 - Key Generator Status
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup Secure Shell SIEMENS 63 Key Generator Diffie-Hellman is the key exchange system used for authentication in the establishment and maintenance of SSH connections. The Key exchange requires a Public key and a Private key. This key ...
Page 70 - Firewall Scripts; To load a firewall script, perform the following:
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup Firewall Scripts SIEMENS 64 Firewall Scripts A firewall is any combination of hardware and software that secures a network and traffic to prevent interception or intrusion. The router has built-in firewall capabilities to secure...
Page 71 - Stateful Firewall; This section describes how to perform the following tasks.
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup Stateful Firewall SIEMENS 65 Stateful Firewall Stateful Firewall varies from the IP Filtering Firewall in that it gathers and maintains state information about each session. IP Filtering Firewall examines the packet’s header inf...
Page 72 - Configure Stateful Firewall
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup Stateful Firewall SIEMENS 66 Configure Stateful Firewall To configure the Stateful Firewall: 1. Click Stateful Firewall from the left navigation pane of the Router Information page. This displays the Stateful Firewall Configurat...
Page 73 - View Dropped Packets; To view the most recent dropped packets:; Dropped Packe; displays the Firewall Dropped Packet List page.; Specify the number of dropped packets to view; from 1 to 200. Netscape 4 users, may have to wait a; Default; to view the most recent 200 dropped packets.
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup Stateful Firewall SIEMENS 67 View Dropped Packets To view the most recent dropped packets: 1. Click Dropped Packe ts from the left navigation pane of the Stateful Firewall Configuration page. This displays the Firewall Dropped P...
Page 74 - Configure Firewall Rules
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup Stateful Firewall SIEMENS 68 Configure Firewall Rules To configure firewall rules: 1. Click Firewall Rules from the left navigation pane of the Stateful Firewall Configuration page. This displays the Firewall Rule Configuration ...
Page 76 - Delete Firewall Rules; To delete firewall rules:; Firewall Rules; the Firewall Rule Configuration page.; Delete; . This expands the Firewall Rule Configuration page.; from
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup Stateful Firewall SIEMENS 70 Delete Firewall Rules To delete firewall rules: 1. Click Firewall Rules from the left navigation pane of the Stateful Firewall Configuration page. This displays the Firewall Rule Configuration page. ...
Page 77 - IKE/IPSec Configuration; displays the IKE/IPSec Information page.
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup IKE/IPSec Configuration SIEMENS 71 IKE/IPSec Configuration IKE/IPSec (Internet Key Exchange/Internet Protocol Security) provides authentication and encryption of IP traffic for the authenticity, integrity and privacy of your com...
Page 78 - IKE Peer Name; peer. Choose a name that is meaningful to you.; Peer Gateway IP Address; , enter the IP address of the gateway at the remote end of the IKE; Destination IP Address; authenticate using this IKE policy.; Destination Subnet Mask; system will authenticate using this IKE policy.
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup IKE/IPSec Configuration SIEMENS 72 Easy IKE/IPSec Setup Internet Key Exchange (IKE) is a means of dynamically creating IP Security (IPSec) connections. IPSec uses encryption and authentication to virtual private networks over an...
Page 79 - Advanced IKE/IPSec Setup; from the left navigation; Create; button for each category to create new IKE and IPSec
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup IKE/IPSec Configuration SIEMENS 73 Advanced IKE/IPSec Setup The Advanced IKE/IPSec Setup page presents information about current IKE and IPSec peers, policies and proposals. To perform Advanced IKE/IPSec setup, click Advanced IK...
Page 80 - IKE Peers Definition
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup IKE/IPSec Configuration SIEMENS 74 IKE Peers Definition IKE peers are those devices known to your internal modem as capable of participating in IKE connections. To define a new IKE Peer: 1. Click Create next to IKE Peers from th...
Page 81 - IKE Proposals Definition
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup IKE/IPSec Configuration SIEMENS 75 IKE Proposals Definition IKE I proposals specify how packets will be encrypted/authenticated for Phase I. To define a new IKE proposal: 1. Click Create next to IKE Proposals from the Advanced I...
Page 82 - IKE IPSec Proposals Definition; IPSec Proposal Definition page.
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup IKE/IPSec Configuration SIEMENS 76 IKE IPSec Proposals Definition IKE IPSec Proposals specify how packets will be encrypted/authenticated for the final SA. To define a new IKE IPSec proposal: 1. Click Create next to IKE IPSec Pr...
Page 84 - IKE IPSec Policies Definition; IPSec Policy Definition page.
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup IKE/IPSec Configuration SIEMENS 78 IKE IPSec Policies Definition IPSec policies are criteria for packets that IPSec will recognize, and actions that IPSec will take upon recognition. To define a new IKE IPSec policy: 1. Click Cr...
Page 85 - connect using this policy.; will connect using this policy.; Source Port
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup IKE/IPSec Configuration SIEMENS 79 9. In Destination IP Address , enter the IP address of the remote private network to which your router will connect using this policy. 10. In Destination Subnet Mask , enter the subnet mask of ...
Page 86 - To start an IPSec session:; VPN Log On; , select the tunnel you wish to use for the IPSec session.; log on; corresponding to the tunnel you selected.
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 6 Security Setup VPN Log On SIEMENS 80 VPN Log On VPN Log On starts an IPSec session. IPSec sessions are initiated through Security Associations (SAs), which allow peers to negotiate a common set of security attributes that assures source authen...
Page 87 - Chapter 7; Monitoring Router; To view system summary information, click; System Summary; on the left navigation pane of the Router
SIEMENS 81 Chapter 7 Monitoring Router This chapter describes how to monitor the health of your router connections. Router health can be monitored using the following functions. System Summary To view system summary information, click System Summary on the left navigation pane of the Router Informat...
Page 88 - Ethernet Interface Information; Ethernet Info; Remote Connection Information; Click; Remote Info; remote connections for all entries in the Remote Router database.
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 7 Monitoring Router System Summary SIEMENS 82 Ethernet Interface Information Click Ethernet Info on the left navigation pane of the System Summary page to display information about the Ethernet interface. Remote Connection Information Click Remo...
Page 89 - IP Routing Information; IP Routing Info; the active interfaces in the IP routing table.; System Information; System Info; select system settings.
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 7 Monitoring Router System Summary SIEMENS 83 IP Routing Information Click IP Routing Info on the left navigation pane of the System Summary page to display information about the active interfaces in the IP routing table. System Information Clic...
Page 90 - Diagnostics; PPPoE Session; PPPoE session; from the drop down menu and click; to display PPPoE session information.
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 7 Monitoring Router Diagnostics SIEMENS 84 Diagnostics The Diagnostic feature provides information about various components of your system that might help in diagnosing a problem. To run diagnostics, click Diagnostics on the left navigation pane...
Page 91 - Interface Information; Interface information; ATM Statistics
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 7 Monitoring Router Diagnostics SIEMENS 85 Interface Information Select Interface information from the drop down menu and click Execute to display interface information. ATM Statistics Select ATM Statistics from the drop down menu and click Exec...
Page 92 - Routing Table Information; Routing Table information; Files Information; Files information
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 7 Monitoring Router Diagnostics SIEMENS 86 Routing Table Information Select Routing Table information from the drop down menu and click Execute to display information about the configured routing tables. Files Information Select Files informatio...
Page 93 - Memory Usage; Memory usage; List All Configuration Data; List all configuration data
SIEMENS 5930/5935 Business GatewayUser’s Guide Chapter 7 Monitoring Router Diagnostics SIEMENS 87 Memory Usage Select Memory usage from the drop down menu and click Execute to display memory usage information. List All Configuration Data Select List all configuration data from the drop down menu and...