Siemens 4015 - User Manual
Siemens 4015 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – EU; No change; TIME
- Page 3 – Programming; Testing; Altering/deleting programs
- Page 4 – Changing the battery; battery power mode BATT
Safety notes
This product may be installed only by a qualified electrician. Non-compliance may result in a fire hazard or electric shocks. Before installation, read
the operating instructions and observe the product-specific requirements for the installation location. Use only original spare par ts for repair and
maintenance. Unauthorised opening and repair by other persons will invalidate all claims for liability, replacement or warranty services.
Technical Data
Supply voltage:
110 / 240V 50/60Hz
Operating temperature:
- 10°C to +55°C
Power consumption:
< 0,1 W
Storage temperature: - 10°C to +60°C
Relay output:
1 changeover contact 16A 250V~ cos
ϕ
= 1
Operating principle:
Type 1.B. S. T. IEC/EN 60730-1,
Accuracy:
± 1 s /day at 25°C
IEC/EN 60730-2-7
single-strand
multi-strand
Operation in a normal environment
Wire cross-sections:
1,5...4 mm
2
1,5...2,5 mm
2
Degree of contamination:
2
Program blocks:
28 adjustable
Installation:
in distribution panel
Battery reserve:
6 years
Operating modes:
Mains power (the relay does not switch in the event of a power failure)
Battery operation, full operation without mains power.
1 2
5
4
3
1200W
100W
1400VA
1x 58W ≤ 7μF
3600W
+
c
R
1800W
+
1800W
2300W
+
1 2
5
4
3
1 2 3 4 5 6 7
0
12
24
ON
OFF
Opens menu selection.
Confirm a selection or apply the parameters
(OK).
Select the options or set the parameters.
Program overview
Day of the week
Current time
5-way switch
Relay status display
Set and enable/disable the switching times.
Flashing cursor indicates day
and time
5-way switch
7LF4 4015
GB
292350/01
251426.41.19 “02”
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
YEAR STRT Setting the time Setting the date Changing to summer time +1h YEAR YEAR MON EU US NO SPEC EU US NO SPEC YEAR STRT MON. STRT DAY STRT MON. END EU US NO SPEC Freely programmable summer time/winter timechangeover date Enter the summer time star ting date and endingdate in your location or cou...
EXIT TIME DATE SU-WI PROG Vir tually turn the dial to select the switch-on time first, e.g. Monday 06.15 Use to select the hour, in this case 6. Then use to set the minutes. Programming EXIT TIME DATE SU WI PROG EXIT TIME DATE SU-WI PROG 1 2 3 4 5 6 7 0 12 24 ON OFF 1 2 1 2 3 4 5 6 7 0 12 24 ON OFF ...
Permanent switching ON/OFF Mains failure EXIT TIME DATE SU WI PROG SU WI PROG TEST AUTO ON PROG TEST AUTO ON OFF ON OFF ON ON OFF OFF 3 Changing the battery Hardware Reset Reset EXIT TIME DATE SU WI PROG ON OFF MODE INFO EXIT TIME DATE SU WI PROG MODE BATT V-AC TEST AUTO ON OFF MODE The following sw...
