Page 2 - Getting started
Getting started I_KAP00.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Getting started Installation steps for the Gigaset 2060isdn 1. Please read the safety instructions before starting ( ➔ page 8). 2. Install the base station ( ➔ page 9). 3. Insert the battery in the mobile unit; cha...
Page 3 - Inland; Overviews; Standard mobile unit, 2000S
Overviews I_KAP00.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Overviews Standard mobile unit, 2000S Comfort mobile unit, 2000C Legend 1. Loudspeaker2. Display3. Speed dial key4. Save key5. Internal key6. On-hook key7. Keypad8. Star key9. Signal key10. Microphone11. ON/OFF/LOCK key1...
Page 5 - Contents
Contents ISDN2060.IVZ Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Getting started ............................................................................................................................. 2 Overviews .....................................................................
Page 8 - Safety instructions; Warning
Safety instructions 8 I_KAP01.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Safety instructions Warning For your personal safety and protection, never use the base station or mobile unit in the bathroom or other wet environment. The devices are not spray-proof. ● Corded devices (tele...
Page 9 - Installation; Base station
Installation 9 I_KAP01.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Installation Base station Contents of package Base station 2 screws and wallplugs ISDN cable User Guide AC power adapter 1 4 2 5 3 1 2 3 4 5 Gigaset 2060isdn Cordless DECT Telephone System s User Guide 2 corded term...
Page 11 - Registering the Gigaset 2000C comfort mobile unit; Initial registration
Installation 11 I_KAP01.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Registering the Gigaset 2000C comfort mobile unit A mobile unit has to be ready for operation before you can use it with a base station. See the section entitled “Instal- lation” in the User Guide supplied with you...
Page 12 - COLL CALL
Installation 12 I_KAP01.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Checking your own internal number Registering at more than one base station and Gigaset 1000C If your mobile unit was already registered at another base station, you must use the following registration proce- dure:...
Page 13 - System code
Installation 13 I_KAP01.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 3. Then back to the mobile unit ● You can register your comfort mobile unit at a maxi- mum of six base stations. ● You can register a maximum of 8 mobile units at a base station. If you start the registration proce...
Page 15 - Wall-mounting the base station
Installation 15 I_KAP01.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Ring allocation Ring allocation is the function which enables you to define the user and MSN at which incoming calls are signalled or to which calls are directed. t Meaning: see footnote This is the menu for editin...
Page 17 - Important information about Euro-ISDN; Types of connection
Installation 17 I_KAP01.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Connection options: base station The default operating mode is “point-to-multipoint access”. The procedure for changing the op- erating mode to “point-to-point” is described on ➔ page 24. Important information abou...
Page 19 - Operation with comfort mobile unit; Using the menus; Conventions used in this User Guide
Operation with comfort mobile unit 19 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Operation with comfort mobile unit Using the menus See the Gigaset 2000C User Guide for detailed instruc- tions on how to use the menus. Conventions used in this User Guide Icons are employed ...
Page 20 - Menu structure for system settings; idle state; Resume
Operation with comfort mobile unit 20 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Example: “External consultation in external call” Menu structure for system settings As a rule, you start from the idle state when you want to change settings . There are some additional setti...
Page 22 - Basic settings; Entering/changing the system code
Basic settings 22 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Basic settings Entering/changing the system code For the sake of security you should enter your own, cus- tom, four-digit system code. This code prevents unautho- rized changes to your settings and the registrati...
Page 24 - International
Basic settings 24 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Setting point-to-point You can use this mode with your Gigaset 2060isdn, but you must obtain the point-to-point access from your net- work provider, who also provides the requisite network terminator. When config...
Page 25 - Suppressing phone-number display; Activating/deactivating call pickup; Device data
Basic settings 25 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Suppressing phone-number display Your Gigaset 2060isdn allows you to suppress display of your phone number on the call partner’s telephone in two cases. Select “Anonym. call” if you do not want your phone number ...
Page 26 - Activating/deactivating call waiting per user; Activating/deactivating automatic line seizure; Call waiting STN
Basic settings 26 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Activating/deactivating call waiting per user If call waiting is activated for one or more internal users and both channels are busy, a call-waiting tone draws at- tention to the next incoming call. You have the ...
Page 28 - Incoming calls; Answering/terminating a call
Incoming calls 28 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Incoming calls Answering/terminating a call An incoming call (external, internal) is signaled audibly by the ringer and visually on the display of the mobile unit. Deactivating the ringer With the ringer off you ...
Page 29 - Call pickup; Call group
Incoming calls 29 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Call pickup Within your call group ( ➔ page 56), you can pick up a call that has not yet been switched through to your telephone. The preconditions are call pickup activated ( ➔ page 25) and group call defined as...
Page 31 - Intercept on
Incoming calls 31 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Tracing a call (call intercept/MCID) You can trace a call to its source. You must obtain this ser- vice from your network provider and activate it, as other- wise the function is rejected and the message “Ident. ...
Page 32 - Outgoing calls; Dialing external numbers with the keypad
Outgoing calls 32 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Outgoing calls Dialing external numbers with the keypad Once base station and comfort mobile unit are in opera- tion, you can generally telephone right away with a mobile unit switched ON. To terminate the call I...
Page 33 - Viewing/dialing from list of calls
Outgoing calls 33 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Viewing/dialing from list of calls Calls which do not complete (no connection because busy, no answer) are automatically logged in a list of calls. Phone numbers are not repeated in the list, even if the user att...
Page 34 - Dialing internal numbers; Calling an internal user
Outgoing calls 34 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Dialing internal numbers Calling an internal user If your configuration consists of multiple internal users (mobile units, devices) you can make internal calls. There are no telephone charges for internal calls. ...
Page 35 - Activating “Anonymous call” for a single call
Outgoing calls 35 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Activating “Anonymous call” for a single call This function enables you to prevent your phone number being displayed for a single call which you are about to make (if you have obtained the “case-by-case suppres- ...
Page 36 - Call in progress; Holding a call
Call in progress 36 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Call in progress Holding a call You can place a call on hold, for example if you want time to examine a document before proceeding. Holding an internal call: t Meaning: see footnote The call with the internal u...
Page 37 - Accessing answering machines/using telephone services
Call in progress 37 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Accessing answering machines/using telephone services Once you have set up a connection you can use the key- pad of the mobile unit to access an answering machine or voice mailbox, for example, or use network-p...
Page 38 - Switching to keypad
Call in progress 38 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Mute function If you want to prevent your call partner in an external call hearing you (for example if you want to consult someone in privacy), you can temporarily mute the mobile unit. t Meaning: see footnote ...
Page 39 - Switching functions; Internal consultation/call transfer
Switching functions 39 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Switching functions Internal consultation/call transfer You can use your system to conduct internal consultation calls and transfer an external call to another internal user. Starting an internal consultatio...
Page 40 - Toggling
Switching functions 40 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Terminating the external consultation call and continuing the first external call: t Meaning: see footnote You can continue your call with the first external user. Toggling If you have a consultation call in...
Page 41 - Three-party conference
Switching functions 41 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Ending toggle mode: t Meaning: see footnote You can continue your call with the first external user. Three-party conference While a consultation call is in progress you have the option of setting up a three-...
Page 42 - Unparking an external call
Switching functions 42 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Parking an external call You can park a call under a parking code and unpark it again under the same code at another telephone, such as a mobile unit. A call can be parked for up to three minutes. If you par...
Page 43 - Deactivating external call forwarding; scriber number
Switching functions 43 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 If you have a point-to-multipoint access , the list of mul- tiple subscriber numbers appears when you select one of the above options and you can select an MSN. Deactivating external call forwarding If you h...
Page 44 - Deactivating all external call forwarding; Forwarding off
Switching functions 44 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Deactivating all external call forwarding The comfort mobile unit is idle. t Meaning: see footnote The message “All forwarding canceled” appears in the display for 2 seconds by way of confirmation. Activatin...
Page 45 - Activating external automatic callback
Switching functions 45 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Activating external automatic callback If you attempt to place an external call but the party you call is busy, you can activate “automatic callback” and re- place the handset. You will be called back automa...
Page 46 - Call charges, call duration; Displaying call charges/call duration; Display units; External
Call charges, call duration 46 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Call charges, call duration Displaying call charges/call duration You can check the total accrued call charges and the charge for the most recent call at each mobile unit. The to- tal accrued charge ...
Page 49 - Locks; Lock for outgoing calls (system lock)/emergency phone numbers; Editing lock numbers/activating and deactivating call barring; System lock
Locks 49 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Locks Lock for outgoing calls (system lock)/emergency phone numbers You can use the system lock to prevent your base station being used for outgoing calls. Incoming calls can be an- swered. Exception: Emergency phone numb...
Page 50 - Delete all lock numbers; Blocking unwanted calls; Lock int2
Locks 50 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 This is the menu for defining lock numbers. The options at your disposal are as follows: Delete all lock numbers Use this function to delete all lock numbers at once. t Meaning: see footnote All lock numbers for all inter...
Page 51 - Setting user access rights
Locks 51 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 t Meaning: see footnote This is the menu for blocking unwanted calls. The options at your disposal are as follows: Deactivating unwanted calls blocking You do not have to go through the Service menu in order to deactivate...
Page 53 - System settings; Setting internal collective call; Internal 1
System settings 53 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 System settings Setting the connection configuration for cordless internal users You can define the types of device that can be used on the system’s subscriber line circuits. Cordless terminating devices can be ...
Page 54 - Activating/deactivating permanent DTMF dialing; Enabling/disabling trunk hold; Trunk hold
System settings 54 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Activating/deactivating permanent DTMF dialing You can permanently activate tone dialing on connection in order to avoid the necessity of switching temporarily to DTMF for using telephone services or accessing a...
Page 55 - Reinitializing the base station; Ring allocation for point-to-multipoint access; Reset
System settings 55 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Reinitializing the base station You can reinitialize the base station - restore default set- tings, in other words - for example if you are no longer sure precisely which changes have been made. For the sake of ...
Page 59 - Set call forwarding with collective call:
System settings 59 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Setting/changing ring allocation for point-to-point access If you have a point-to-point access ring allocation is set au- tomatically when you assign the internal user numbers to the system number. You may be un...
Page 60 - Unregistering a mobile unit; Unregister
System settings 60 I_KAP03.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Unregistering a mobile unit You can unregister each mobile unit using either the mo- bile unit itself or any other mobile unit. t Meaning: see footnote Ž The comfort mobile unit is idle. You will be prompted to ...
Page 61 - Operation with other mobile units
Operation with other mobile units 61 I_KAP03A.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Operation with other mobile units Gigaset 1000C All the Gigaset 2060isdn functions are at your disposal with the Gigaset 1000C, except for those listed below. Procedures that cannot be used wi...
Page 67 - Operation with supplementary devices; Connecting corded devices
Operation with supplementary devices 67 I_KAP04.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Operation with supplementary devices Connecting corded devices Sockets (see illustration, ➔ page 17) The Gigaset 2060isdn base station has two telephone sockets (B and C) for connecting cord...
Page 68 - Connecting telephones
Operation with supplementary devices 68 I_KAP04.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Setting the device type “Telephone” is the default device type for corded supple- mentary devices. You should connect a modem or fax ma- chine to socket 0 by preference, and if you connect a...
Page 69 - General
Operation with supplementary devices 69 I_KAP04.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 ● Socket C (bottom), internal number 9: max. 9 600 baud Outgoing calls General The procedures described below apply to a corded telephone connected to the base station. You can operate other...
Page 71 - Call pickup/pickup from answering machine
Operation with supplementary devices 71 I_KAP04.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Incoming calls Call pickup/pickup from answering machine You can pick up an external ringing call even if the call has not been signaled at your telephone or has already been answered by the...
Page 72 - Setting internal call forwarding
Operation with supplementary devices 72 I_KAP04.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Switching functions Setting internal call forwarding You can forward external calls intended for you to another internal user. You can forward calls only to a user who does not have call for...
Page 73 - Foretasting
Operation with supplementary devices 73 I_KAP04.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Consultation call/call transfer As well as internal consultations, your ISDN system also enables you to conduct external consultation calls, for ex- ample with an external business partner. ...
Page 77 - Operation with door intercoms; Examples of how to connect door intercoms via TFE
Operation with door intercoms 77 I_KAP04.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Operation with door intercoms Examples of how to connect door intercoms via TFE This example illustrates how the Gigaset 2060isdn can be connected to various types of entrance telephone via door in...
Page 79 - Ring allocation for the door intercom; tion
Operation with door intercoms 79 I_KAP04.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 There are also certain changes which apply to the various entrance telephones: Ring allocation for the door intercom If you want to install a door intercom you can decide which internal users can b...
Page 80 - Connection to the entrance telephone; Connection to comfort mobile unit
Operation with door intercoms 80 I_KAP04.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Connection to the entrance telephone The entrance telephone must be connected to the sup- plementary-device socket assigned internal number 9, otherwise it will not work. Note that only those inter...
Page 81 - Multicell system; same; Preparations
Multicell system 81 I_KAP05.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Multicell system Step-by-step procedure Follow the procedure described below step by step in order to incorporate your Gigaset 2060isdn in a multicell system. At all base stations you can: ● be reached under th...
Page 82 - Possible combinations
Multicell system 82 I_KAP05.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 General remarks When the Gigaset 2060isdn is incorporated in a multicell system you can use your mobile unit at any of several base stations. By positioning the Gigaset 2060isdn base stations strategically you ...
Page 85 - Setting multicell operation; Point to MP
Multicell system 85 I_KAP05.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Setting multicell operation t Meaning: see footnote After selecting and then confirming “Point to MP” and thus activating this setting, select: The message “internal connec. via S0 bus disabled” ap- pears on th...
Page 86 - Select station; Preferred search
Multicell system 86 I_KAP05.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Setting automatic base station selection If you have a configuration with more than one base sta- tion you can determine the base station to which your mo- bile unit connects. You need automatic base station se...
Page 87 - Switching to another base station while conducting a call
Multicell system 87 I_KAP05.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Enable/disable base station change with call in progress You can register and operate the mobile units at different base stations from the Siemens Gigaset family, including non-ISDN base stations. In order to p...
Page 88 - Operation behind a private branch exchange
Operation behind a private branch exchange 88 I_KAP05.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Operation behind a private branch exchange General remarks You can connect your Gigaset 2060isdn to and operate it via private branch exchanges connecting to Euro-ISDN ac- cesses with ...
Page 89 - Enabling/disabling call transfer; Other Euro-ISDN features
Operation behind a private branch exchange 89 I_KAP05.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Enabling/disabling call transfer Call transfer is enabled by default. t Meaning: see footnote Other Euro-ISDN features Many Euro-ISDN PBXs support a range of Euro-ISDN fea- tures compa...
Page 90 - General notes; Ring signals
General notes 90 I_KAP06.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 General notes Ring signals beeep 0.5s tone 0.5s tone 0.8s pause 4.2s pause 0.8s tone 4s pause 3 x 0.3s tone and 0.3s pause 0.8s tone 0.8s pause 3 x 0.2s tone and 0.3s pause, repeated after 0.5s pause 0.5s tone 0.5...
Page 91 - System upkeep
General notes 91 I_KAP06.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 System upkeep Wipe the mobile units and base station clean with a damp cloth or antistatic cloth. Never use a dry cloth (risk of electrostatic buildup). Technical data Standards I-CTR3, CTR 6, CTR 10 Number of cha...
Page 92 - Troubleshooting; Problem
General notes 92 I_KAP06.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Troubleshooting A problem is not necessarily caused by a technical defect. You can save yourself time and money by tackling some of the simpler problems yourself. This troubleshooting chart will help you do just t...
Page 93 - Warranty; Telephone in Germany:
General notes 93 I_KAP06.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Warranty Siemens AG guarantees this device for 6 months as of the date of purchase from the retailer. Keep your receipts as proof of purchase. Under the terms of this warranty Siemens AG shall, at no cost, rectify...
Page 94 - Frequently asked questions; Setting the multiple subscriber number (MSN) for outgoing calls
Frequently asked questions 94 I_KAP07.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Frequently asked questions 1. Setting the multiple subscriber number (MSN) for outgoing calls Can I set a specific multiple subscriber number (MSN) for outgoing calls? ● Yes, when you program ring all...
Page 98 - Glossary
Glossary 98 I_KAP08.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Glossary Access rights By setting access rights you determine whether your tele- phone can be used ● for outgoing and incoming external and internal calls (full trunk access rights), ● for incoming external calls and i...
Page 101 - Quick-reference guide, comfort mobile unit
Quick-reference guide, comfort mobile unit 101 I_KAP09.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Switch mobile unit ON/OFF/LOCKED Register mobile unit *) Press Register button (LED) in base station. Follow the prompts on the display. Set multiple subscriber number (MSN) *) (Syste...
Page 103 - Quick-reference guide, supplementary device
Quick-reference guide, supplementary device 103 I_KAP09.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Dial external phone number Dial internal phone number Internal collective call Activating external automatic callback Internal consultation during external call External consultation...
Page 105 - Special accessories
Special accessories 105 I_KAP10.FM5 Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 Special accessories All the accessories described below are available from your retailer. Gigaset 2000C Gigaset 2000H Gigaset 2000L The Gigaset 2000C has an easily readable 4-line display for excellent user...
Page 107 - Index; Stichwortverzeichnis
Index 109 isdn2060.six Gigaset 2060isdn , Inland : 8.12.98 A30853-X210-B101-1-19 A a/b services ................................................... 95 AC supply base station ............................................ 91 access ........................................................... 51 operatin...
