Page 2 - Introduction; CAUTION; UNPACKING AND INSTALLATION; ENGLISH; CLASS 1
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 2 Introduction Congratulations on Your Purchase! Your new DVD Player is designed to deliver maximumenjoyment and years of trouble free serv...
Page 3 - AC VOLTAGE SELECTION; FOR YOUR SAFETY; READ THIS BEFORE OPERATING YOUR UNIT
Units shipped to countries other than the abovecountries are equipped with an AC voltage selectorswitch on the rear panel. Refer to the followingparagraph for the proper setting of this switch. AC VOLTAGE SELECTION This unit operates on 115 / 230 V AC. The ACvoltage selector switch on the rear panel...
Page 4 - CONTENTS
4 CONTENTS Introduction UNPACKING AND INSTALLATION 2 READ THIS BEFORE OPERATING YOUR UNIT 3 System Connections CONNECTING TO A/V AMPLIFIER OR RECEIVER 5 CONNECTING TO TV WITH AUDIO AND VIDEO INPUTS 7 CONNECTING TO ADDITIONAL COMPONENT WITH VIDEO AND DIGITAL OUTS 7 CONNECTING SYSTEM CONTROL 8 CONNECT...
Page 5 - System Connections; before; CONNECTING TO AN A/V AMPLIFIER OR RECEIVER
System Connections 5 Plase make all connections to this DVD player before plugging in the AC cord. Since different components may have different names for the same inputs and outputs, carefully read theoperating instructions of any component to be connected to this player.Please follow all color cod...
Page 7 - CONNECTING TO TV WITH AUDIO AND VIDEO INPUTS
7 ENGLISH You can enjoy DVD Videos by simply connecting this unit to a TV. To hear improved audio sound quality, connect the MIXEDAUDIO OUTs 1 to your amplifier or receiver.To connect these jacks correctly, refer to “Connecting MIXED AUDIO OUTs 1” and “Connecting VIDEO OUTs” on theprevious page. Not...
Page 8 - CONNECTING SYSTEM CONTROL
8 ENGLISH Connect this jack to the DIGI LINK jack of some Sherwood receivers such as RV-5106/R, RD-6106/R, RD- 7106/R, R-756/R, R-956/R, etc. that uses the DIGI LINK III remote control system. (For details, refer to the operating instructions of that unit.)When connecting this jack to the DIGI LINK ...
Page 9 - Note; CONNECTING TO TV AND VCR WITH SCART CONNECTORS (Regional Option)
9 ENGLISH For some countries like Europe, the unit incorporates the TV and VCR SCART connectors.You can connect the unit to TV and VCR easily using the SCART connections without other cumbersome audio and video connections. During operation of the unit, these connectors can deliver either the regula...
Page 10 - Front Panel & Remote Controls; Front Panel Controls
10 ENGLISH Front Panel & Remote Controls Front Panel Controls Remote Controls 1 34 35 36 11 10 6 11 8 10 26 19 27 28 29 32 33 31 30 15 12 9 25 24 17 16 20 7 18 22 23 21 3 4 2 5 7 8 9 13 14
Page 12 - LOADING BATTERIES
12 ■ FLUORESCENT DISPLAY ENGLISH Use the remote control unit within a range of about 7meters (23 feet) and angles of up to 30 degreesaiming at the remote sensor. LOADING BATTERIES REMOTE CONTROL OPERATION RANGE Remove the batteries when they are not used for a long time. Do not use rechargeable batt...
Page 13 - Preliminary Knowledge About Discs; PLAYABLE DISC TYPES
13 ENGLISH ■ Markings on the DVD Videos Please check the copyright laws in your country before attempting to record from DVD Video or CD.Recording copyrighted material may infringe oncopyright laws. DVD Video is protected by the copyguard system.If you connect the unit directly, to your VCR the copy...
Page 14 - CARE AND HANDLING OF DISCS
14 SYMBOL AND MESSAGE ABOUT INVALIDOPERATION CARE AND HANDLING OF DISCS ENGLISH When you press a button, if the unit does not accept that operation, appears on the TV screen. Operations are occasionally unacceptable even if is not displayed. During operation, if the “WRONG REGION CODE” is displayed ...
Page 15 - BASIC PLAYBACK; Preparations; Operations
15 ENGLISH BASIC PLAYBACK ■ Preparations Turn on the TV and select the video input source connected to the unit.To enjoy the sound of the disc from your audio system, turn on the audio system and select the input source connected to the unit. Set the TV screen type correctly to match your TV. The ST...
Page 18 - GENERAL INFORMATION ABOUT ON-SCREEN SYMBOLS
18 ENGLISH Rapid (/slow) advance / reverse playback during playback You can play back discs at various speeds. Note : Only in U.S.A., Canada, etc. where this unit conformsto the NTSC color system, slow reverse playback canbe available. Each time the FORWARD SEARCH button is pressed, thespeed increas...
Page 19 - When correcting the numbers entered.
19 PLAYING THE DESIRED SECTION OF DISC (TITLE/CHAPTER/TRACK/TIME SEARCH) The on-screen symbols will be displayed automatically, even if the on-screen display isturned off or not already visible. Each time this button is pressed, the search mode changes depending on the disc as follows; → [(T -- /3 →...
Page 21 - REPEAT PLAYBACK
21 Repeating a title, chapter or track Repeating the desired part REPEAT PLAYBACK You can play back a current title, chapter, track or section repeatedly. (Title repeat, enitire disc repeat, chapter/track repeat, A-B repeat) Note : Repeat playback may not work correctly on some DVD Videos. During pl...
Page 22 - CHANGING THE TIME DISPLAY DURING PLAYBACK
22 INTROSCAN PLAYBACK [CD only] You can play back the first 10 seconds of each track. Start introscan playback. To return to normal playback, press this button again. Then “ ” is displayed on the TV screen, and the first 10 seconds of each track on a CD will playback in sequence repeatedly. During i...
Page 23 - CHANGING THE AUDIO LANGUAGE [DVD Video only]; CHANGING THE CAMERA ANGLE [DVD Video only]
23 CHANGING THE AUDIO LANGUAGE [DVD Video only] It is possible to change the audio language to a different language from the one selected at the initial settings. (For details, refer to “SETTING THE LANGUAGE” on page 30.) This operation works only with discs on which multiple audio languages are rec...
Page 24 - CHANGING THE SUBTITLE LANGUAGE [DVD Video only]; To clear the subtitle.
24 CHANGING THE SUBTITLE LANGUAGE [DVD Video only] It is possible to change the subtitle language to a different language from the one selected at the initial settings.(For details, refer to “SETTING THE LANGUAGE” on page 30.)This operation works only with discs on which multiple subtitle languages ...
Page 26 - LISTENING WITH HEADPHONES
26 LISTENING WITH HEADPHONES 1 For private listening, connect the headphones. Headphones with a 1/4 inch (6.3 mm) stereo plugcan be connected. 2 Adjust the volume level of the headphones as desired. Note : Listening at extremely high levels may beharmful to your ears and headphones. Main unit Main u...
Page 27 - Initial Settings
27 The initial settings made to this unit at the factory are stored in memory and can be modified as desired, later. The setup menu screen appears on the TV screen.If you press the SETUP button again while the SETUP menu is displayed, the menu will disappear. The necessary details for the selected c...
Page 29 - SETTING THE SYSTEM
⊃ 29 SETTING THE SYSTEM You can use the unit as DVD player or as a digital surround sound decoder (or both).For use as a surround sound decoder, be sure to connect the DIGITAL OUTs of the associated source unit to the DIGITAL INs of this unit. (Refer to CONNECTING TO ADDITIONAL COMPONENT WITH VIDEO ...
Page 30 - SETTING THE LANGUAGE
⊃ ⊃ 1 Tilt the CURSOR/ENTER button upward or downward to select the item, then press theCURSOR/ENTER button. 30 SETTING THE LANGUAGE Note : If the selected language is not recorded, the initial language on the disc is played or displayed. Refer to the DVD Language Code Liston page 47 to find the 4-d...
Page 31 - SETTING THE TV SCREEN
RC RC ⊃ 31 SETTING THE TV SCREEN Depending on your TV, tilt the CURSOR/ENTER button upward or downward to select a TV screen type, thenpress the CURSOR/ENTER button. The selected type is highlighted. Letter bax screen with 4:3 aspect ratio. DVD Video software recorded with the 16:9 aspect ratio isre...
Page 32 - SETTING THE AUDIO SETUP; When selecting the DIGITAL OUTPUT
⊃ 32 SETTING THE AUDIO SETUP To select the bitstream or linear PCM as digital audio signal format To select a preferred dynamic range control To select a preferred surround sound To select a preferred speaker option For your reference, the following chart shows therelationship between types of playb...
Page 33 - When selecting the Dynamic Range Control; When selecting the SURROUND
⊃ ⊃ 33 This function can be activated in the Dolby Digital mode only. (Refer to When selecting SURROUND on thispage.)You can compress the dynamic range of the Dolby Digital sound if you need.Using this function, you can listen to sound at low volume levels easily. The built-in decoder of the unit al...
Page 34 - When selecting the SPEAKER SETUP; When selecting the SPEAKER OPTIONS
⊃ ⊃ 34 When the 6.1 CH AUDIO OUTS of the unit are connected to the 6.1 (or 6) CH INs of your amplifier or receiver to enjoyhigh-quality audio and surround with the built-in decoder, these items should be set correctly.Tilt the CURSOR/ENTER button upward or downward to select SPEAKER OPTIONS, then pr...
Page 35 - Continued
⊃ 35 No testnoise Notes : The delay time(s) is (are) automatically adjusted, based on the distance entered.When PRESENT is selected for the rear center speaker type, the rear center signal is extracted from therear left and right signals and reproduced during playback of 5.1 CH program sources such ...
Page 36 - SETTING THE CUSTOM SETUP; When selecting the COLOR SCHEME
36 SETTING THE CUSTOM SETUP 1 Tilt the CURSOR/ENTER button upward or downward to select COLOR SCHEME, then pressthe CURSOR/ENTER button. 2 Tilt the CURSOR/ENTER button upward or downward to select the preferred color, then pressthe CURSOR/ENTER button. The selected color is highlighted. When selecti...
Page 38 - When selecting the SCART OUTPUT (Regional Option)
For some countries like Europe, the unit incorporates the TV and VCR SCART connectors which can delivereither the regular video and RGB signals or the S-video (Y and C) signals as well as the mixed audio L andR signals for easy connection.When the SCART connections between the unit and video compone...
Page 39 - SETTING THE RATING LEVEL; When selecting either the OFF or a rating level.
39 SETTING THE RATING LEVEL 1 Press the CURSOR/ENTER button to enter a password. 2 Enter a 4-digit with the NUMERIC buttons, then press the CURSOR/ENTER button. 3 Tilt the CURSOR/ENTER button upword or downward to select the preferred item, then press theCURSOR/ENTER button. This function restricts ...
Page 40 - Playing back your selections in the preferred sequence.; When selecting the PROGRAM MENU; SETTING THE DISC SETUP
⊃ ⊃ ⊃ 40 Up to 20 chapters or tracks can be programmed to be played in any desired sequence. ■ Playing back your selections in the preferred sequence. When a DVD Video is loaded. When a CD is loaded. To program chapters/tracks in the desired sequence. To memorize the favorite condition or select eit...
Page 42 - Correcting a disc title; When selecting the FAVORITE CONDITION
42 Each time a DVD Video is loaded, the LANGUAGE, TV SCREEN and PROGRAM MENU settitings should beadjusted to your favorite condition.However, once the LANGUAGE, TV SCREEN and PROGRAM MENU settings for a DVD Video are memorizedusing the SAVE FC (Favorite Condition), each time a disc is loaded, your c...
Page 43 - Playing back a DVD Video in the favorite condition again.; When selecting the CLEAR DISC ID
⊃ 43 ■ Playing back a DVD Video in the factory settings for the LANGUAGE, TV SCREEN and PROGRAM MENU. You can play back a DVD Video in the factory defaults for the LANGUAGE, TV SCREEN and PROGRAM MENU without clearing the favorite condition. ■ Playing back a DVD Video in the favorite condition again...
Page 44 - Definition Of Terms
44 DVD Video This refers to a high-density optical disc on which high-qualitypictures and sound have been recorded by means of digitalsignals. Incorporating a new video compression technology(MPEG II) and high-density recording technology. DVD Videoenables esthetically pleasing full-motion video to ...
Page 45 - Troubleshooting Guide; PROBLEM
45 If a fault occurs, run through the table below before taking your unit for repair.If the fault persists, attempt to solve it by switching the unit off and on again. If this fails to resolve the situation,consult your dealer. Under no circumstances should you repair the unit yourself as this could...
Page 46 - Specifications
46 ■ TYPE System DVD Video player system. Signal read system Semiconductor laser, wavelength 650 nm ■ D/A CONVERSION SECTION D/A conversion 24 bit Oversampling Sampling freqnency : 44.1, 48 kHz / 96 kHz 8 fs, 8 fs / 4 fs ■ AUDIO SECTION Frequency response Sampling frequency : 44.1 kHz 4 Hz ~ 20 kHz ...
Page 47 - DVD Language Code List; Code No. Language
47 6565 Afar6566 Abkhazian6570 Afrikaans6577 Amharic6582 Arabic6583 Assamese6588 Aymara6590 Azerbaijani6665 Bashkir6669 Byelorussian6671 Bulgarian6672 Bihari6678 Bengari ; Bangla6679 Tibetan6682 Breton6765 Catalan6779 Corsican6783 Czech6789 Welsh6865 Danish6869 German6890 Bhutani6976 Greek6978 Engli...
Page 48 - DVD PLAYER; O P E R A T I N G I N S T R U C T I O N S
V-756 DVD PLAYER 5707- 04724- 001- 0 O P E R A T I N G I N S T R U C T I O N S
