Page 2 - CAUTIONS
XE-A207/A217/A307 LEAD-FREE SOLDER ■ LEAD-FREE SOLDER The PWB’ s of this model employs lead-free solder. The “LF” marks indicated on the PWB’s and the Service Manual mean “Lead-Free” solder. The alphabet following the LF mark shows the kind of lead-free solder. Example: (1) NOTE FOR THE USE OF LEAD-...
Page 3 - CHAPTER 1. MASTER RESET; PROCEDURE 1; NO BATTERY
XE-A207/A217/A307 MASTER RESET – 1 – CHAPTER 1. MASTER RESET This programming is chiefly performed when the ECR is shipped, installed, or serviced. 1. MASTER RESET Master resetting clears the entire memory and resumes initial values. Initial values of language can be selected one from following 5 ki...
Page 5 - MAJOR KEYS USED IN THE PGM MODE
XE-A207/A217/A307 PGM MODE – 3 – CHAPTER 2. PGM MODE 1. MAJOR KEYS USED IN THE PGM MODE 1-1. BASIC OPERATION KEY 1-2. TEXT INPUT MODE KEY NAME Action 2 CURSOR UP Move cursor to up (1 character) 4 CURSOR DOWN Move cursor to down (1 character) 3 CURSOR RIGHT Move cursor to right (1 character) 1 CURSOR...
Page 6 - CHARACTER ENTRY METHOD; Entering alphanumeric characters
XE-A207/A217/A307 PGM MODE – 4 – 1-3. KEY LAYOUT XE-A207W/A207B XE-A217W/A217B 2. CHARACTER ENTRY METHOD 2-1. MOBILE PHONE METHOD (XE-A207W/A207B ONLY) ■ Entering alphanumeric characters To enter a character, simply press a corresponding character key on the programming keyboard. To enter “A”, press...
Page 7 - PURPOSE
XE-A207/A217/A307 PGM MODE – 5 – 3. GENERAL ■ PURPOSE The PGM mode programming is chiefly used when installing the ECR or programming the functions that the manager has selected. ■ OPERATION 1) Press the [MODE] key. The following mode screen is displayed. 2) Move the cursor to [6 PGM MODE] by using ...
Page 16 - OPERATION
XE-A207/A217/A307 PGM MODE – 14 – 4. READING ■ OPERATION 1) Select the PGM from the mode selection window. 2) Select “1 READING” from the PGM mode menu to display the items list. 3) Select an item listed in the display. ■ SAMPLE PRINTOUTS DEPARTMENT *1: PLU *2: FUNCTIONS MEDIA *3: FUNCTION TEXT SICS...
Page 21 - PLU RANGE
XE-A207/A217/A307 PGM MODE – 19 – ■ PLU RANGE 1) Select “3 PLU RANGE” from the ARTICLE menu to display the items list. 2) Enter a value or select an option for each item as follows: • START CODE (Use the numeric entry) Starting PLU code (max. 5 digits) • END CODE (Use the numeric entry) Ending PLU c...
Page 22 - FUNCTION LIST
XE-A207/A217/A307 PGM MODE – 20 – 5-2. FUNCTIONS ■ FUNCTION LIST ■ (-) 1) Select “1 (-)” from the FUNCTIONS menu to display the items list. ■ %1, %2 1) Select “2 %1” or “3 %2” from the FUNCTIONS menu to display the items list. ■ RA 1) Select “4 RA” from the FUNCTIONS menu to display the items list. ...
Page 24 - FOREIGN CURRENCY; Programmed symbol
XE-A207/A217/A307 PGM MODE – 22 – ■ FOREIGN CURRENCY 1) Select “6 FOREIGN CURRENCY” from the MEDIA menu to display the items list. *1: This symbol is printed with (+) amount of foreign currency. The programmed characters is printed at left side of amount. Ex) Case of “ DM”: If some space characters ...
Page 27 - MODE PASS CODE
XE-A207/A217/A307 PGM MODE – 25 – ■ MODE PASS CODE 1) Select “3 MODE PASS CODE” from the PERSONNEL menu to dis- play the items list. ■ TRAINING CLK 1) Select “4 TRAINING CLK” from the PERSONNEL menu to display the items list. 5-6. TERMINAL 5-7. DATE/TIME *1: The date display/entry format complies wi...
Page 28 - BASIC SYSTEM
XE-A207/A217/A307 PGM MODE – 26 – 5-8. OPTIONAL ■ BASIC SYSTEM 1) Select “1 BASIC SYSTEM” from the OPTIONAL menu to display the items list. *1: All of display and print aren't edited when “NO” is selected. 1. Receipt Print 2. Receipt Window 3. BILL print 4. Transaction contents that has been entered...
Page 30 - FUNCTION SELECT
XE-A207/A217/A307 PGM MODE – 28 – ■ FUNCTION SELECT 1) Select “5 FUNCTION SELECT” from the OPTIONAL menu to dis- play the items list. LIMITED: Allowed only when manager code has been entered. PUBLIC: Allowed without manager code. ■ PRINT SELECT 1) Select “6 PRINT SELECT” from the OPTIONAL menu to di...
Page 31 - EXCHANGE FUNCTION
XE-A207/A217/A307 PGM MODE – 29 – In case of “1st quantity = 2”, “2nd quantity = 3” and “unit price = 1.00” FORMAT1: 2x 3/ 1.00 FORMAT2: 2x 1.00 PER 3 * This selection does not affect display. ■ EAN FUNCTION(XE-A307) 1) Select “7 EAN FUNCTION” from the OPTIONAL menu to display the items list. ■ EXCH...
Page 32 - PRINT SELECT
XE-A207/A217/A307 PGM MODE – 30 – *1: YYMMDD or DDMMYY or MMDDYY The date format complies with the setting “OPTIONAL - BASIC SYS- TEM - DATE FORMAT”. In case of date setting is all 0, EURO date/time function is not work. YY: Year 2 digits (00 to 99) (omitted upper 2 digits of 20xx) MM: Month 2 digit...
Page 33 - Z COUNTER
XE-A207/A217/A307 PGM MODE – 31 – ■ Z COUNTER 1) Select “3 Z COUNTER” from the REPORT menu to display the items list. ■ Z1 GENERAL REPORT 1) Select “4 Z1 GENERAL REPORT” from the REPORT menu to dis- play the items list. ■ HOURLY REPORT This menu can be selected after Z1 HOURLY REPORT before the star...
Page 34 - RECEIPT LOGO
XE-A207/A217/A307 PGM MODE – 32 – ■ CCD(XE-A307) 1) Select “7 CCD” from the REPORT menu to display the items list. 5-10.MESSAGE ■ RECEIPT LOGO 1) Select “1 RECEIPT LOGO” from the MESSAGE menu to display the items list. 6-line header: All 6 lines are programmable. 3-line header: Upper 3 lines (1st - ...
Page 35 - PRINTER
XE-A207/A217/A307 PGM MODE – 33 – ■ PRINTER 1) Select “3 PRINTER” from the DEVICE CONFIG menu to display the items list. Selecting of light and shade 00 = 89% for Standard (80% for printer standard) 50 = Standard (90% for printer standard) 99 = 111% for Standard (100% for printer standard) ■ RS PORT...
Page 36 - CONTROL UNIT
XE-A207/A217/A307 PGM MODE – 34 – ■ SCANNER(XE-A307) 1) Select “6 SCANNER” from the DEVICE CONFIG menu to display the items list. Note: Default preset is provided for default setting of ER-A6HS1. ■ CONTROL UNIT This programming can be programmed in Sweden mode. 1) Select “5(XE-A307 is 7) CONTROL UNI...
Page 37 - KEY TEXT
XE-A207/A217/A307 PGM MODE – 35 – 5-13.AUTO KEY ■ KEY TEXT 1) Select “1 KEY TEXT” from the AUTO KEY menu to display the items list. 2) Select “1 AUTO 1”, “2 AUTO 2”, “3 AUTO 3”, “4 AUTO 4”, or “5 AUTO 5” from the KEY TEXT menu to display the items list. ■ KEY SEQUENCE 1) Select “2 KEY SEQUENCE” from...
Page 41 - SSR INPUT
XE-A207/A217/A307 SRV MODE – 39 – 2-3. MEMORY INITIAL 1) Select “3 MEMORY INITIAL” from the SETTING menu to display the items list. 2) When this job is selected, YES/NO dialogue is appeared. If “YES” is selected, MEMORY INITIAL is executed. MEMORY INITIAL clears the following data. • GT • Z counter ...
Page 42 - SSR ALL CLEAR
XE-A207/A217/A307 SRV MODE – 40 – ■ SSR ALL CLEAR 1) Select “3 SSR ALL CLEAR” from the SSR menu to display the items list. 2) YES/NO dialogue is appeared. If “YES” is selected, all SSR get invalid. • This job can be executed, even if there is no valid SSR data. • Nothing is printed (recorded) on jou...
Page 43 - CHAPTER 4. SD CARD MODE
XE-A207/A217/A307 SD CARD MODE – 41 – CHAPTER 4. SD CARD MODE 1. GENERAL ■ PURPOSE In ECR, SD card is the tool for providing the each data of ECR to by offline and saving/loading ALL RAM DATA at ECR. ■ TARGET SD CARD • San Disk (4GB - 32GB) * This model does not support the card with adapters such a...
Page 44 - LIST OF FOLDER
XE-A207/A217/A307 SD CARD MODE – 42 – ■ LIST OF FOLDER The user folder is made at a folder “\SHARP\yyyyyyyy”. \ALL, \EJ, \ONLINE, \PROGRAM, \SALES, \SSR and \UPDATE are made at the user folder. \EJ is made at the folder “\SHARP\yyyyyyyy\xxxxxxxx\ONLINE”. The file “SRECORD.REC” is made at the folder ...
Page 47 - EXAMPLES OF SALES DATA FILE
XE-A207/A217/A307 SD CARD MODE – 45 – ■ EXAMPLES OF SALES DATA FILE Each file is text data of the Comma Separated Value. Department • CODE and GROUP is not 0-suppressed. • TEXT is written with double quotes. • A double character code is changed to a space character code. ex) DEPT.01 3 “DEPT. 0 1” • ...
Page 50 - ALL PROGRAMMING DATA
XE-A207/A217/A307 SD CARD MODE – 48 – 4-2. EJ DATA (SAVING ONLY) Electronic journal data is saved in SD card. Maximum 400 times data is kept in SD Card when the SD memory is not full. In case of “SAVE FOR ONLINE”, after saving EJ data to SD card, the EJ data in ECR is erased. 1) Select “2 EJ DATA” f...
Page 51 - INDIVIDUAL PROGRAMMING DATA
XE-A207/A217/A307 SD CARD MODE – 49 – Following data is not saved. DATE/TIME programming MACHINE# programming CONSECUTIVE# programming If the folder for “Programming Data” does not exist in SD memory card, this job is inhibited. [“NO FOLDER” ERROR] If there is data of the same file name, data is ove...
