Sharp MX-2614N - Manual - manualsarea.com

Page 2 - FAX interface cable and Line cable:; SOFTWARE LICENCE; Warranty; MATERIAL SAFETY DATA SHEET

2 Caution! For complete electrical disconnection, pull out the main plug.The socket-outlet shall be installed near the equipment and shall be easily accessible.Shielded interface cables must be used with this equipment to maintain compliance with EMC regulations.The equipment should be installed nea...

Page 3 - CAUTIONS; CAUTION; Power notes; WARNING; CAUTION; Symbols in this manual

3 CAUTIONS To ensure safe use of the machine, this manual uses various safety symbols. The safety symbols are classified as explained below. Be sure you understand the meaning of the symbols when reading the manual. WARNING Indicates a risk of death or serious injury. CAUTION Indicates a risk of hum...

Page 4 - About consumables; Installation notes

4 Do not install the machine on an unstable or slanted surface. Install the machine on a surface that can withstand the weight of the machine. Risk of injury due to the machine falling or toppling.If peripheral devices are to be installed, do not install on an uneven floor, slanted surface, or other...

Page 5 - Handling precautions; Laser information; Caution

5 Do not place a container of water or other liquid, or a metal object that might fall inside, on the machine. If the liquid spills or the object falls into the machine, fire or electrical shock may result. Do not remove the machine casing. High-voltage parts inside the machine may cause electrical ...

Page 6 - SUPPLIES; Proper storage; Storing toner cartridges; Storage of supplies; Acoustic noise emission (measurement according to ISO7779); Noise emission values

6 SUPPLIES Standard supplies for this product that can replaced by the user include paper, toner cartridges, and staple cartridges for the finisher.Be sure to use only SHARP-specified products for the toner cartridges, finisher staple cartridge, and transparency film. The supply of spare parts for r...

Page 7 - PART NAMES

7 PART NAMES Main power switch Tray 1 Tray 2 (when paper feed tray is installed)* Tray 3 (when paper feed tray is installed)* Tray 4 (when paper feed tray is installed)* Bypass tray Front cover Output tray (Centre tray) Automatic document feeder * Peripheral device. USB connector (A type) Exit tray ...

Page 8 - TURNING THE POWER ON AND OFF; Turning on the power; Restarting the machine

8 TURNING THE POWER ON AND OFF This machine has two power switches. The main power switch is at the bottom left after the front cover is opened. The other power switch is the [POWER] key ( ) on the operation panel. Turning on the power (1) Switch the main power switch to the “ ” position.(2) Press t...

Page 9 - OPERATION MANUALS AND HOW TO USE THEM; Before using the machine; Start Guide: this manual; Printing and faxing from a computer; Operation manuals

9 OPERATION MANUALS AND HOW TO USE THEM The instructions for this manual are separated in the following three sections. Before using the machine Start Guide: this manual This section explains precautions to ensure safe usage, part names and how to switch on/off the power. This section also includes ...

Page 10 - SPECIFICATIONS; Basic Specifications / Copier specifications

10 SPECIFICATIONS Basic Specifications / Copier specifications Name MX-2314N/MX-2614N/MX-3114N Type Desktop Colour Full colour Copier system Laser electrostatic copier Scanning resolution Scan (B/W): 600 × 600 dpi, 600 × 400 dpi, 600 × 300 dpiScan (full colour): 600 × 600 dpiPrint: 600 × 600 dpi, eq...

Page 13 - INFORMATION ON DISPOSAL; Information on Disposal for Users (private households); Information on Disposal for Business Users; In the European Union

13 INFORMATION ON DISPOSAL Information on Disposal for Users (private households) � In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment must be treated separately and in accordance with legislati...

Page 14 - TO THE ADMINISTRATOR OF THE MACHINE; System settings password; Password for logging in from a computer; For the users of the fax function; Important safety instructions

14 TO THE ADMINISTRATOR OF THE MACHINE System settings password A password is necessary to change the machine’s system settings using administrator authority. System settings can be changed from either the operation panel or using a computer web browser. After setting up the machine, refer to [SYSTE...

Page 15 - TRADEMARK ACKNOWLEDGMENTS

15 The following trademarks and registered trademarks are used in conjunction with the machine and its peripheral devices and accessories. • Microsoft ® , Windows ® , Windows ® XP, Windows Server ® 2003, Windows Vista ® , Windows Server ® 2008, Windows ® 7, Windows ® 8, Windows Server ® 2012 and Int...

Sharp MX-2614N - Manual

Table of Contents:

Other Manuals for Sharp MX-2614N

Summary

Other Sharp Models