Sharp GX-M10 - Manual
Sharp GX-M10 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Accessories
The following accessories are included.
AC power cord x 1
(QACCD0025AWZZ)
Remote control x 1
(RRMCGA293AWSA)
Stand for iPad x 1
(GITAUA014AW01)
Dock spacer x 1
(PSPAGA003AWZZ)
Carrying Strap x 1
(JHNDZA001AW01)
iPad, iPhone, iPod, iPod classic, iPod nano, and
iPod touch are trademarks of Apple Inc., registered
in the U.S. and other countries.
MODEL
GX-M10
PORTABLE CD STEREO SYSTEM
OPERATION MANUAL
iPhone not included.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect
speci
cally to iPod, iPhone, or iPad respectively, and has been certi
ed by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.
ENGLISH
12H R KI
1
TINSZB414AWZZ
*TINSZB414AWZZ=C*|
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual
carefully. It will guide you in operating your SHARP product.
E-1
Front panel
1. Equalizer/X-Bass Button
2. Power On/Stand-by Button
3. Demo/Dimmer/Stop Button
4. Tuner/Audio In Button
5. Tuner Preset Down, CD/USB Track Down, iPod/
iPhone Skip Down Button
6. USB Play/Pause Button
7. Tuner Preset Up, CD/USB Track Up, iPod/iPhone
Skip Up Button
8. CD Play/Pause Button
9. Volume Down Button
10. iPod Play/Pause Button
11. Volume Up Button
12. Docking station door open knob
13. Timer indicator
14. Remote sensor
15. Docking station
16. USB/iPad Terminal
17. CD compartment
18. CD compartment open knob
Rear panel
1. FM antenna
2. DC 12 V input jack
3. Headphone jack
4. Microphone volume knob
5. Microphone input jack
6. Guitar input jack
7. Guitar volume knob
8. Audio input jack
9. Video output jack
10. AC input jack
11. Cable holder
X-BASS/EQ
DEMO/DIMMER
VOLUME
iPod
CD
USB
TUNER/AUDIO-IN
POWER
ON/STAND-BY
PORTABLE MUSIC BOOMBOX GX-M10
PRESET
TIMER
REMOTE
SENSOR
1
1 3 5 7 9 11
2 4 6 8 10
13
12
14
16
15
17 18
1
2
3 4 5 6 7 8
9
10
11
1
2
3
4
5
6 7
20
19
18
17
16
15
14
13
12
11
10
9
8
21
22
Speakers
PORTABLE MUSIC BOOM
BOX GX-M10
3
2
1
1. Front speaker
2. Subwoofer
3. Bass Refl ex Duct
Display
1. CD Indicator
2. USB Indicator
3. MP3 Indicator
4. WMA Indicator
5. iPod Indicator
6. FM Stereo Mode Indicator
7. Stereo Station Indicator
8. Total Indicator
9. Folder Indicator
10. Title Indicator
11. MEM (Memory) Indicator
12. X-bass Indicator
13. Sleep Indicator
14. Once Timer Indicator
15. Daily Timer Indicator
16. RDM (Random) Indicator
17. Repeat Indicator
18. Microphone Indicator
19. Guitar Indicator
20. Battery Level Indicator
21. Play Indicator
22. Pause Indicator
Controls and indicators
E-2
System connections
AC power connection
After checking all the connections have been made correctly,
plug the AC power cord of this unit into the AC outlet.
Notes:
z
Remove all batteries when using AC power.
z
Unplug the AC power cord from the AC outlet if the unit will not
be in use for a prolonged period of time.
Demonstration mode
z
The
rst time the unit is plugged in with AC power, the unit will
enter the demonstration mode. You will see words scroll and
the subwoofer light up will operate in the
ashing mode.
z
To cancel the demonstration mode, press the DEMO/DIMMER
button (remote control) during power stand-by mode. The unit
will enter the low power consumption mode. The subwoofer
light will be off.
z
To return to the demonstration mode, press the DEMO/
DIMMER button again.
z
If iPod or iPhone is docked, the unit will begin charging. “iPod
CHARGING” will be displayed.
DC power connection
Caution:
z
During battery/DC operation, the unit will be set to Demo mode
off with display and subwoofer light in MODE 2 to reduce the
battery power consumption.
z
When using battery/DC power, the remote control cannot be
used to turn on the unit.
z
Unplug the AC power cord from the unit before using the DC
power. Otherwise the unit will not work.
z
When the unit is not in use for an extended period, remove the
DC cord from the DC IN 12 V jack.
Do not connect the DC and AC
power to the unit at the same time.
To AC INPUT
jack
AC outlet
AC 120 V ~ 60 Hz
CAUTION:
TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG
TO WIDE SLOT, FULLY INSERT.
Remote control
1. Remote Control Transmitter
2. Demo/Dimmer Button
3. Numeric Buttons
4. Equalizer (X-Bass) Button
5. Tuner Preset Up Button
6. Tuner Preset Down Button
7. Folder Button
8. Tuning Up, iPod Cursor Up, Folder Up Button
9. Skip Down, Fast Reverse, Time Down Button
10. Tuning Down, iPod Cursor Down,
Folder Down Button
11. Memory Button
12. Audio In Button
13. USB Play/Pause Button
14. Tuner Button
15. Display Button
16. On/Stand-by Button
17. Mute Button
18. Volume Up Button
19. Volume Down Button
20. Sleep (Clear) Button
21. Play Mode/Random Button
22. Skip Up, Fast Forward, Time Up Button
23. Enter Button
24. Clock (Timer) Button
25. CD Play/Pause Button
26. iPod Play/Pause Button
27. iPod Display (TV OUT) Button
28. CD/USB Stop Button
29. iPod Menu Button
7
8
10
13
12
11
15
14
5
2
4
6
3
9
16
17
18
19
20
21
22
23
24
25
27
29
28
26
1
Controls and indicators
(*) Label is located at the
bottom of the unit.
The safety marking and
statement label (*)
E-3
System connections (continued)
Operation with batteries
Fully charge the iPod, iPhone and iPad with AC power
before using GX-M10 battery operation.
1 Disconnect the AC and DC power cord, and remove the
battery compartment cover.
z
Remove USB connection and undock the iPod or iPhone
before installing batteries to avoid possible damage.
z
Connection of the AC or DC power cord to the unit
disconnects the batteries.
2 Insert 10 “D” size batteries (UM/SUM-1, R20, HP-2 or
similar) into the battery compartment according to the
sequence indicated on the rear panel.
z
When inserting or removing the batteries
5
and
0
, push
them toward the (-) battery terminals.
z
Installing the batteries incorrectly may cause the unit to
malfunction.
z
Batteries are not included.
6
7
9
8
10
1
2
5
4
3
Insert the batteries
according to the
sequence indicated.
Bottom row
Top
row
3 Replace the battery compartment cover.
Precautions for battery use:
z
Insert the batteries according to the direction indicated on the
rear panel.
z
Remove the batteries if they are weak or if the unit will not be
used for long periods of time. This will prevent potential damage
due to battery leakage.
z
Replace all old batteries with new ones at the same time.
z
Do not mix old and new batteries.
Battery replacement:
z
When batteries are low, battery indicator “
” will blink to show
that the batteries need to be replaced. sound may become
distorted and unit may automatically turn off or mute during
high volume level. Reduce the volume level or replace the
batteries.
z
When replacing the batteries, place the unit on a cushion or soft
cloth to avoid damage.
Cautions:
z
Do not use rechargeable battery (nickel-cadmium battery,
etc.).
z
Immediately remove the discharged batteries. If the chemical
leak into the unit, clean it.
z
Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine,
re or the like.
Connecting iPod or iPhone to TV
Photo and video
les from iPod or iPhone can be viewed by
connecting the system to TV/monitor.
If the TV/monitor has a video input, connect it to the VIDEO OUT
jack at the back of the unit and set the TV Out on the iPod or
iPhone unit to “ON” position.
Note:
Please make sure to set iPod unit to either NTSC or PAL to
match your TV signal. Please visit Apple’s homepage for further
information.
Remote control
Battery installation
Use 1 “AA” size battery (UM/SUM-3, R6, HP-7 or similar).
Battery is not included.
1
Open the battery cover.
2
Insert the battery according to the terminal indicated in
the battery compartment.
When inserting or removing the battery, push it toward
the (–) battery terminals.
3
Close the cover.
Caution:
z
Remove the battery if the unit will not be used for a long period
of time. This will prevent potential damage due to battery
leakage.
z
Do not use rechargeable battery (nickel-cadmium battery,
etc.).
z
Installing the battery incorrectly may cause the unit to
malfunction.
z
Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine,
re or the like.
Notes concerning use:
z
Replace the battery if the operating distance is reduced or
if the operation becomes erratic. Purchase an “AA” size
battery (UM/SUM-3, R6, HP-7 or similar).
z
Periodically clean the transmitter on the remote control and
the sensor on the unit with a soft cloth.
z
Exposing the sensor on the unit to strong light may interfere
with operation. Change the lighting or the direction of the
unit if this occurs.
z
Keep the remote control away from moisture, heat, shock,
and vibrations.
Carrying the unit
Caution:
Before transporting the unit, remove the iPod, iPhone,
iPad, USB memory device and disc from the unit. Then,
set the unit to the power stand-by mode. Transporting the
unit with iPod, iPhone, iPad or USB memory device left
connected or discs left inside might damage the unit.
Using the carrying strap
This unit can be carried by using a supplied carrying strap. Insert the
carrying strap carabiner (hook) to each end of the unit as shown below.
Hole
To remove the
carrying strap
Carabiner (hook)
Hole
Cautions:
z
Before carrying the unit, make sure the carabiner (hook) is
properly secured and closed, otherwise it will cause damage
and injury.
z
Carry this unit with FM antenna close to you and the display
facing outward to avoid scratches on the display.
E-4
Placing the unit
This unit can be placed in 2 positions as shown below.
Caution:
z
Make sure that the unit is placed on a
at and level surface.
z
Make sure to turn the unit carefully when adjusting the position.
z
Do not place the unit other than these 2 positions to avoid damage
and injury.
To get the best display viewing angle, place the unit as below.
Position 1:
On the shelf/table.
T
R
O
P
ABLE M
IS
U
O
B
C
M
O B G
X
O X-M10
Foot cushion
1
and
2
touching the surface.
Position 2:
On the fl oor/ground
O
P RTABL
E
I
S
U
M
B
C OOMBO
X GX-M10
Foot cushion
2
and
3
touching the surface.
General control
PORTABLE MUSIC BOOMBOX GX-M10
REMOTE
SENSOR
TIMER
POWER
ON/STAND-BY
To turn the power on
Press the POWER ON/STAND-BY button to turn the power on.
After use:
Press the POWER ON/STAND-BY button to enter the power
stand-by mode.
Display and Subwoofer light up control
The display and subwoofer light can be changed.
Main unit:
1) Press DEMO/(DIMMER)/ button for more than 3 seconds.
The current mode will be displayed.
2) Within 5 seconds, press DEMO/(DIMMER)/ button to change
the mode.
Remote control:
Press DEMO/DIMMER button to change the mode.
MODE 1
MODE 2
MODE Off
(Display backlight on and Subwoofer light off)
(Display backlight on and Subwoofer light on)
(Display backlight off and Subwoofer light off)
Notes:
z
During battery/DC operation, the unit will be set to Demo mode
off with display and subwoofer light in MODE 2 to reduce the
battery power consumption.
z
During MODE 2, press any button to light up the display
backlight for a few seconds.
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
Volume control
Press VOLUME +/– buttons (on main unit) or VOL +/– (on remote
control) to increase or decrease the volume.
Direct key power on function
When you press any of the following buttons, the unit turns on.
z
iPod / , CD / , USB / on the main unit or the remote
control: selected function is activated.
z
TUNER/AUDIO IN on the main unit: last tuner or audio function
is activated.
z
TUNER or AUDIO IN on the remote control: the unit turns on
with the selected function activated.
Auto power off function
The main unit will enter the stand-by mode (when iPad, iPod,
iPhone, guitar or microphone is not connected) after 15 minutes
of inactivity during:
iPod:
Not docked.
Audio In:
No detection of input signal.
CD:
In the stop mode or no disc.
USB:
In the stop mode or no media.
Note:
However, if iPod or iPhone is docked, the unit will begin charging.
“iPod CHARGING” will be displayed.
Auto resume function
The auto resume function will resume the last function and
playback, should there be a power failure or the AC power cord
becomes disconnected. However, CD/MP3 program and random
mode are not memorized.
Equalizer
When the EQ/(X-BASS) button is pressed, the current mode
setting will be displayed. To change to a different mode, press
the EQ/(X-BASS) button repeatedly until the desired sound mode
appears.
ROCK
FLAT
VOCAL
HIP HOP
REGGAE
SALSA
No equalization.
For rock music.
Vocals are enhanced.
For hip hop music.
For salsa music.
For reggae music.
Muting
The volume is muted temporarily when pressing the
button on
the remote control. Press again to restore the volume.
X-Bass control
When the power is
rst turned on, the unit will enter the extra bass
mode which emphasizes the bass frequencies, and “X-BASS” will
appear. To cancel the extra bass mode, press the EQ/(X-BASS)
button. The last equalizer mode will turn on.
To turn on the X-Bass mode again, press the EQ/(X-BASS) button
for more than 2 seconds.
E-5
Made for:
z
iPod touch (4th generation)
z
iPod touch (3rd generation)
z
iPod touch (2nd generation)
z
iPod touch (1st generation)
z
iPod classic
z
iPod nano (6th generation)
z
iPod nano (5th generation)
z
iPod nano (4th generation)
z
iPod nano (3rd generation)
z
iPod nano (2nd generation)
z
iPhone 4S
z
iPhone 4
z
iPhone 3GS
z
iPhone 3G
z
iPhone
z
iPad (3rd generation)
z
iPad 2
z
iPad
Caution:
Please update your iPod, iPhone and iPad unit to the latest
software version before using it. Please visit Apple’s homepage
to download the latest version for your iPod, iPhone and iPad.
Notes:
z
Charging terminal for iPod, iPhone and iPad:
Condition
DOCK
USB/iPad
terminal
USB function
YES
YES
(without iPod or
iPhone docking)
Other function
(iPod / CD /
Tuner / Audio In)
YES
NO
Stand-by
YES
NO
z
Fully charge the iPod, iPhone and iPad with AC power
before using GX-M10 battery operation.
z
The message “This accessory is not made to work with
iPhone” or similar, may appear on the iPhone screen
when:
- battery is low.
- the iPhone is not properly docked (eg. slanting).
If this occurs, remove and re-dock the iPhone.
z
This product is made for iPod, iPhone and iPad. To
prevent random interference when iPod, iPhone
or iPad is connected, the headphone output is
disabled, and “HPINVALD” will be displayed.
You may also experience brief audio interference
during incoming calls.
z
The headphone output is switched off during inserting
iPod, iPhone and iPad unit. This is an Apple product
speci
cation.
iPod, iPhone and iPad connection (USB
only)
1
Insert the connector to the iPod, iPhone or iPad.
iPad
Connector
2
Place the iPad to the stand for iPad.
Stand for iPad
iPad
3
Connect the iPod, iPhone or iPad to the unit via USB
connector.
Note:
USB/iPad terminal does not support VIDEO out.
iPod, iPhone or iPad playback (USB only)
1
Press the POWER ON/STAND-BY button to turn the power on.
2
Press the USB / button on the remote control or the main unit
to select USB function.
3
Connect iPod, iPhone or iPad to the unit. “USB/iPod” will appear.
Track number
4
Press the USB / button to start playback.
Note:
Stop button ( ) is invalid during iPod, iPhone or iPad playback.
iPhone playback
z
Sound will only switch from iPhone to the main unit after
authentication process is completed in approximately 10 seconds.
z
Incoming calls will pause the playback.
z
Once the calls are answered, the conversation can only be
heard through the built-in iPhone speaker. Turn on the iPhone
speaker or undock the iPhone to start conversation.
iPod and iPhone connection (Dock only)
Caution:
Unplug all accessories from the iPod or iPhone before inserting
it into the dock.
Note:
Do not use the docking station to connect your iPad.
1
Open the docking station door by pushing
the docking station door open knob to the
area marked ‘ ’.
Cautions:
z
Close the docking station door if
not in use.
z
Do not press the docking station
door downward when it is open as
it may cause damage and injury.
Docking station
door
2
Dock your iPod or iPhone into the unit.
Dock for iPhone
iPhone
iPhone (bottom)
Dock connector
For additional support, apply dock spacer (supplied) as shown.
Docking station
Dock spacer
Peel off
separator
1
Peel off the double sided tape separator.
2
Place the spacer on the space allocated inside the docking
station as shown.
Listening to the iPod, iPhone or iPad
E-6
iPod or iPhone playback (Dock only)
1
Press the POWER ON/STAND-BY button to turn the
power on.
2
Press the iPod / button on the remote control or the
main unit to select iPod function.
3
Insert iPod or iPhone unit into the dock of main unit.
“DOCK OK” will appear. Make sure to close the docking
station door before playback.
4
Press the iPod / button to start playback.
Notes:
z
When enjoying loud music at high volume, sound vibration is
transferred to the docked iPod or iPhone. This vibration may
cause the song to shuf
e if the iPod or iPhone ‘Shake to Shuf
e’
setting is turned on. Should this happen, turn off the ‘Shake to
Shuf
e’ function.
z
iPod touch and iPhone need to be operated itself in the
following operations.
1. Returning to the home screen.
2. Selecting the application on the home screen.
3. Dragging the slider.
To operate the connected iPod or iPhone, turn this unit
to position 2 (refer “Placing the unit” on page 4).
PORTABLE MUSIC BOOMBOX GX-M10
REMOTE
SENSOR
TIMER
POWER
ON/STAND-BY
To disconnect iPod, iPhone or iPad
It is safe to disconnect iPod, iPhone and iPad even during
playback. However, attention should be drawn when removing the
iPod or iPhone from docking station to avoid damage.
Watching videos on a TV connected to
iPod or iPhone
1
Press the DISPLAY (TV OUT) button for more than 2 seconds
until “V-OUT ON” appear on display.
2
Press the ENTER button to start playback.
Notes:
z
If the TV Out setting is already turned on at video menu, the
video is automatically displayed on the TV screen when ENTER
key is pressed.
z
USB/iPad terminal does not support VIDEO OUT.
z
To return to watching video on iPod or iPhone screen, press the
MENU button to enter video menu. Then press the DISPLAY
(TV OUT) button for more than 2 seconds until “V-OUT OFF”
appears.
z
During iPod or iPhone video playback, pressing the DISPLAY
(TV OUT) button will not toggle video out display between iPod
and TV.
Caution:
Stop button ( ) is invalid during iPod function
Navigating the iPod, iPhone or iPad menus
1
Press the MENU button to view the menu on iPod,
iPhone or iPad unit. Press it again to go back to
previous menu.
2
Use the TUNING ( or ) button to select an item on
the menu and then press ENTER button.
Note:
When navigating the iPod, iPhone or iPad menu with remote
control, do not operate any of the buttons on the iPod or iPhone
unit. The volume level is adjusted by pressing the VOL (+ or –)
button on the main unit or the remote control. Adjusting the volume
on the iPod, iPhone or iPad units give no effect.
iPod, iPhone and iPad operations:
The operations described below depend on the generation iPod,
iPhone and iPad you are using.
System on operation:
When the main unit is powered on, the iPod, iPhone or iPad units
will automatically power on when docked or connected in the unit.
System off (stand-by operation):
When the main unit is turned to stand-by mode, the docked
iPod, iPhone or connected iPad unit will automatically pause the
playback.
Various iPod, iPhone and iPad functions
Function
Main unit
Remote
control
Operation
DOCK
USB
DOCK
USB
Play
iPod
USB
iPod
USB
Press in the pause
mode.
Pause
iPod
USB
iPod
USB
Press in the
playback mode.
Track
up/
down
Press in the
playback or pause
mode.
If you press the
button in the pause
mode, press the
/ button to start the
desired track.
Fast
forward/
reverse
Press and hold
down in the playback
mode.
Release the button
to resume playback.
Display
____
Press to toggle
display content.
Repeat
____
Press to toggle
repeat mode.
Shuffl e
____
Press for more than
2 seconds to toggle
shuf
e mode.
Menu
____
Press to view the
iPod menu during
iPod function.
Enter
____
Press to con
rm the
selection.
Cursor
Up/
Down
____
Press to select the
iPod menu.
Listening to the iPod, iPhone or iPad (continued)
E-7
PORTABLE MUSIC BOOMBOX GX-M10
REMOTE
SENSOR
TIMER
CD
POWER
ON/STAND-BY
Disc playback
1
Press the POWER ON/STAND-BY button to turn the power on.
2
Press the CD / button on the remote control or the main unit to select
CD function.
3
Open the CD compartment by pushing the CD compartment open knob to
the area marked ‘ ’.
4
Place the disc on the spindle, label side up.
5
Close the CD compartment.
6
Press the CD / button to start playback. After the last track is played, the
unit will stop automatically.
Caution:
z
Do not place two discs in the spindle.
z
Do not play discs of special shapes (heart, octagon, etc). It may cause
malfunctions.
z
If TV or radio interference occurs during CD operation, move the unit away
from the TV or radio.
z
Due to the structure of the disc information, it takes longer to read an MP3/
WMA disc than a normal CD (approximately 20 to 90 seconds).
z
Do not open the CD compartment during playback or you may be injured.
Notes for CD or MP3/WMA disc:
z
When the end of the last track is reached during fast forward, “END”
will appear on the display and CD operation will be paused. When the
beginning of the
rst track is reached during fast reverse, the unit will enter
the playback mode (only for CD).
z
Rewritable multi-session discs with un
nished writing, can still be played.
Various disc functions
Function
Main unit
Remote
control
Operation
Play
Press in the stop
mode.
Stop
DEMO/(DIMMER)
Press in the
playback mode.
Pause
Press in the
playback mode.
Press the / button
to resume playback
from the paused
point.
Track
up/
down
Press in the
playback or stop
mode.
If you press the
button in the stop
mode, press the
/ button to start the
desired track.
Fast
forward/
reverse
Press and hold
down in the playback
mode.
Release the button
to resume playback.
Direct track search
By using the Numeric buttons, the desired tracks on the current
disc can be played.
Use the Numeric buttons on the remote control to select the
desired track while playing the selected disc.
z
The Numeric buttons allow you to select up to number 9.
z
When selecting number 10 or higher, use the “10+” button.
A. For example, to choose 13
1 Press the “10+” button once.
2 Press the “1” button.
3 Press the “3” button.
B. For example, to choose 130
1 Press the “10+” button twice.
2 Press the “1” button.
3 Press the “3” button.
4 Press the “0” button.
Notes:
z
A track number higher than the number of tracks on the disc
cannot be selected.
z
During random play, direct search is not possible.
To stop playback:
Press the DEMO/(DIMMER)/ ( ) button.
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the PLAY MODE button repeatedly until “REP ONE”
appears. Press the CD / button.
To repeat all tracks:
Press the PLAY MODE button repeatedly until “REP ALL” appears.
Press the CD / button.
To repeat desired tracks:
Perform steps 1 - 5 in “Programmed play” section on page 8 and
then press the PLAY MODE button repeatedly until “REP ALL”
appears.
To cancel repeat play:
Press the PLAY MODE button repeatedly until “NORMAL” appears
and “
” disappears.
Caution:
After performing repeat play, be sure to press the DEMO/(DIMMER)/
( ) button. Otherwise, the disc will play continuously.
Listening to a CD or MP3/WMA disc
E-8
Advanced CD or MP3/WMA disc playback
Random play
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press and hold PLAY MODE button on the remote control until
“RANDOM” appears. Press the CD / button.
To cancel random play:
Press the PLAY MODE button again. “RDM” indicator will
disappear.
Notes:
z
If you press the
button during random play, you can
move to the track selected next by the random operation. On
the other hand, the
button does not allow you to move
to the previous track. The beginning of the track being played
will be located.
z
In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
Programmed play (CD)
You can choose up to 32 selections for playback in the order you
like.
1
While in the stop mode, press the MEMORY button on the
remote control to enter the programming save mode.
2
Press the numeric button or
or
buttons on the
remote control to select the desired track.
3
Press the MEMORY button to save the track number.
4
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be
programmed. If you want to check the programmed tracks,
press the MEMORY button repeatedly. If you make a mistake,
the programmed tracks can be cleared by pressing the CLEAR
button for more than 2 seconds.
5
Press the CD / button to start playback.
Programmed play (MP3/WMA)
1
While in the stop mode, press the MEMORY button to enter the
programming save mode.
2
Press the TUNING ( or ) button on the remote control to
select the desired folder.
Then press the
or
button on the remote control to
select the desired tracks.
3
Press the MEMORY button to save the folder and track
number.
4
Repeat steps 2 – 3 for other folder/tracks. Up to 32 tracks can
be programmed.
5
Press the CD / button to start playback.
To cancel the programmed play mode:
During programmed stop mode, press the DEMO/(DIMMER)/ ( )
button. The display will show “MEM CLR” and all the programmed
contents will be cleared.
Adding tracks to the program:
If a program has been previously stored, the “MEM” indicator will
be displayed. Press the MEMORY button. Then follow steps 2
- 3 to add tracks.
Notes:
z
When a CD compartment door is opened, the program is
automatically canceled.
z
If you press the POWER ON/STAND-BY button to enter the
stand-by mode or change the function from CD to another, the
programmed selections will be cleared.
z
During the program operation, random play is not possible.
MP3/WMA folder mode (only for
MP3/WMA files)
Procedure to playback MP3/WMA disc
with folder mode on
To play back CD-R/RW.
1
Press the CD / button, and load an MP3/WMA disc. Press the
FOLDER button and disc info will be displayed.
2
Press the TUNING ( or ) button to select desired playback
folder. (Folder mode on)
3
Select desired
le to be played back by pressing the
or
button.
4
Press the CD / button. Playback will start and
le name will
be displayed.
z
Title, Artist and Album name are displayed if they are recorded
on the disc.
z
In case of playback with the folder mode on, press the
TUNING ( or ) button, and the folder can be selected even
though it is in playback/pause mode. It will continue playback/
pause mode in the 1st track of the selected folder.
z
Display content can be changed by pressing the DISPLAY
button.
File name display
Folder display
Counter display
Album display
Artist display
Title display
Note:
If “NOTSUPRT” is displayed, it means “Copyright protected WMA
le” or “Not supported playback
le” is selected.
E-9
Caution:
At USB mode, once the iPod or iPhone is docked onto the unit,
the iPod or iPhone will automatically start charging. ‘iPod DOCK
CHARGE MODE’ will be displayed. In order to listen to any USB
mass storage device / MP3 player, the iPod or iPhone must be
removed from the docking station.
PORTABLE MUSIC BOOMBOX GX-M10
REMOTE
SENSOR
TIMER
Note:
This product is not compatible with MTP and AAC
le systems
from USB mass storage device or MP3 player.
To play back USB/MP3 player with folder
mode off
1
Press the USB / button on the remote control or the main unit
to select USB function. Connect the USB memory device that
has MP3/WMA format
les on the unit. When the USB memory
is connected to the main unit, the device information will be
displayed.
2
Select desired
le to be played back by pressing the
or
button.
3
Press the USB / button. Playback will start and the
le name
will be displayed.
z
Title, Artist and Album name are displayed if they are
recorded in the USB memory device.
z
Display content can be changed by pressing the DISPLAY
button.
Note:
To pause playback:
Press the USB / button.
To play back USB/MP3 player with folder
mode on
1
Press the USB / button on the remote control or the main unit
to select USB function. Connect the USB memory device that
has MP3/WMA format
les on the unit. When the USB memory
is connected to the main unit, the device information will be
displayed.
2
Press the FOLDER button, and press the TUNING ( or )
button to select desired playback folder. To start playback with
folder mode on, go to step 4. To change the playback folder,
press the TUNING ( or ) button to select another folder.
3
Select desired
le to be played back by pressing the
or
button.
4
Press the USB / button. Playback will start and the
le name
will be displayed.
z
Title, Artist and Album name are displayed if they are
recorded in the USB memory device.
z
Display content can be changed by pressing the DISPLAY
button.
To remove USB memory device
1
Press the DEMO/(DIMMER)/ ( ) button to stop playback.
2
Disconnect USB memory device from the USB/iPad terminal.
Notes:
z
SHARP will not be held liable for the loss of data while the USB
memory device is connected to the audio system.
z
Files compressed in MP3 and/or WMA format can be played back
when connected to the USB/iPad terminal.
z
This USB memory’s format supports FAT 16 or FAT 32.
z
SHARP cannot guarantee that all USB memory devices will work
on this audio system.
z
USB cable is not recommended for use in this audio system to
connect to USB memory device. Use of the USB cable will affect
the performance of this audio system. iPod, iPhone and iPad is not
prone to this condition.
z
This USB memory cannot be operated via USB hub.
z
The USB/iPad terminal in this unit is not intended for a PC connection
but is used for music streaming with a USB memory device.
z
External HDD-storage cannot be played back via USB/iPad
terminal.
z
If the data inside the USB memory is large, it may take longer time
for the data to be read.
z
This product can play WMA and MP3
les. It will automatically detect
the
le type being played. If unplayable
le is played on this product,
“NOTSUPRT” is indicated and the
le will be automatically skipped.
This will take a few seconds. If abnormal indications appear on the
display due to the unspeci
ed
le, turn off the unit and then turn it
on again.
z
This product relates to USB mass storage devices and MP3 players.
It may however face some irregularities due to various unforeseen
reasons from some devices. Should this happen, turn off the unit
and then turn it on again.
z
During CD function, MP3 player will not be charging.
Advanced USB playback
The following functions are the same as CD operations:
Page
Direct track search ...................................................................... 7
Repeat play .................................................................................. 7
Random play................................................................................ 8
Programmed play (MP3/WMA) .................................................. 8
Note:
If USB memory device is not connected, “NO MEDIA” will be
shown on the display.
Notes:
z
This unit only supports “MPEG-1 Audio Layer-3” format. (Sampling
Frequency is 32, 44.1, 48kHz)
z
Playback order for MP3
les may differ depending on the writing
software used during
le download.
z
Bitrate which is supported by MP3 is 32~320 kbps, WMA is 64~160
kbps.
z
For MP3/WMA
les, please put “.MP3” “.WMA” extension. Files
cannot be played back if there is no MP3/WMA extension.
z
Playlists are not supported on this unit.
z
This unit can display Folder Name or File Name up to 32
characters.
z
Maximum total number of MP3/WMA
les is 65025.
z
Total number of folders read is 999 including folder with non-playable
le. However, the display shows only folder with MP3
les.
z
The display playback time may not be displayed correctly when
playing back a variable bitrate
le.
z
The ID3TAG information supported are TITLE, ARTIST and ALBUM
only. Title name, artist name and album name can be displayed by
pressing the DISPLAY button during
le playback or pause mode.
z
WMA meta tag also supports title, artist and album name which
are recorded in WMA
les. Copyright protected WMA
les cannot
be played back.
Listening to USB mass storage device/MP3 player
E-10
PORTABLE MUSIC BOOMBOX GX-M10
REMOTE
SENSOR
TIMER
POWER
ON/STAND-BY
Tuning
1
Press the POWER ON/STAND-BY button to turn the
power on.
2
Press the TUNER button on the remote control or TUNER/
AUDIO IN button on the main unit repeatedly to select FM
Stereo or FM Mono.
3
Press the TUNING ( or ) button on the remote control
to tune in to the desired station.
z
Manual tuning:
Press the TUNING ( or ) button repeatedly to tune in
to the desired station.
z
Auto tuning:
When the TUNING ( or ) button is pressed for more
than 0.5 seconds, scanning will start automatically
and the tuner will stop at the
rst receivable broadcast
station.
Notes:
z
When radio interference occurs, auto scan tuning may
stop automatically at that point.
z
Auto scan tuning will skip weak signal stations.
z
To stop the auto tuning, press the TUNING ( or ) button
again.
To receive an FM stereo transmission:
z
Press the TUNER button to select stereo mode and “ST”
indicator will be displayed. “
” will appear when an FM
broadcast is in stereo.
z
If the FM reception is weak, press the TUNER button to
extinguish the “ST” indicator. The reception changes to
monaural, and the sound becomes clearer.
Memorizing a station
You can store 40 FM stations in memory and recall them at the
push of a button. (Preset tuning)
1
Perform steps 1 - 3 in “Tuning”.
2
Press the MEMORY button.
3
Within 30 seconds, press the PRESET ( or ) button to select
the preset channel number. Store the stations in memory, in
order, starting with preset channel 1.
4
Within 30 seconds, press the MEMORY button to store that
station in memory. If the “MEM” indicator and preset number
disappear before the station is memorized, repeat the operation
from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset
station. When a new station is stored in the memory, the station
previously memorized for that preset channel number will be
erased.
Note:
The backup function protects the memorized stations for a few
days should there be a power failure or the AC power cord become
disconnected.
To recall a memorized station
1
Press the PRESET ( or ) button for less than 0.5 seconds to
select the desired station.
To scan the preset stations
The stations saved in the memory can be scanned automatically.
(Preset memory scan)
1
Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will
ash and the programmed stations will
be tuned in sequentially, for 5 seconds each.
2
Press the PRESET ( or ) button again when the desired
station is located.
To erase entire preset memory
1
Press the POWER ON/STAND-BY button to enter the stand-by
mode.
2
While pressing down the PRESET
button, press the POWER
ON/STAND-BY button until “TUNCLEAR” appears.
POWER
ON/STAND-BY
Listening to the radio
E-11
The connection cord is not included. Purchase a commercially
available cord as shown below.
Connecting a guitar / microphone
Caution:
Be careful not to connect a bass guitar as it might damage this
unit.
Microphone or guitar
(not supplied)
Ø 1/4” (6.3 mm)
monaural cable
(not supplied)
1
Set the guitar/microphone volume (GAIN) knob to the minimum
level.
2
Connect a guitar/microphone to the correct input jack. Make sure
that the cable has a 1/4” (6.3 mm) diameter plug.
3
Arrange the guitar/microphone cables into the grooves of the
cable holder on the left or the right side of the unit.
Then, thread the cable through the bottom of the unit.
Do not let the cables to be on top of the unit when using
guitar/microphone as it may cause the unit to roll over
causing damage and injury.
Thread the cables under the unit
Cable holder
4
Connect the cables to a guitar/microphone.
5
Select a source.
z
To mix a guitar or microphone sound with a source sound,
select the playback source (iPod/CD/USB/Audio In/Tuner).
z
To play a guitar or using the microphone only, select ’AUDIO
IN’ function. Make sure there is no playback from Audio In
connection.
6
Adjust the volume (GAIN) knob on the connected equipment.
z
To enjoy a guitar distortion effect, turn the guitar volume
(GAIN) knob to almost maximum level.
Note:
Before disconnecting the guitar/microphone, set the guitar/
microphone volume (GAIN) knob to the minimum level.
Listening to the playback sounds of
portable audio player, etc.
Headphone (not
supplied)
Portable audio
player, etc.
Audio cable (not supplied)
1
Use a connection cord to connect the portable audio player etc.
to the AUDIO IN jack. When using video equipment, connect the
audio output to this unit and the video output to a television.
2
Press the POWER ON/STAND-BY button to turn the power on.
3
Press the AUDIO IN button on the remote control or TUNER/
AUDIO IN button repeatedly on the main unit to select AUDIO
IN function.
4
Play the connected equipment. If volume level of the connected
device is too high, sound distortion may occur. Should this
happen, lower the volume of the connected device. If volume
level is too low, increase the volume of the connected device.
Note:
To prevent noise interference, place the unit away from the
television.
Headphones
z
Do not turn the volume on to full at switch on and listen to music
at moderate levels. Excessive sound pressure from earphones
and headphones can cause hearing loss.
z
Before plugging in or unplugging the headphone, reduce the
volume.
z
Be sure your headphone has a 1/8” (3.5 mm) diameter plug
and impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
z
Plugging in the headphone disconnects the speakers
automatically. Adjust the volume using the VOLUME control.
Connecting other equipment
E-12
Setting the clock (Remote control only)
In this example, the clock is set for the 12-hour (AM 12:00) display.
1
Press the POWER ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the ENTER button.
4
Press the
or
button to select 12-hour or 24-hour
display and then press the ENTER button.
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
The 24-hour display will appear.
(0:00 - 23:59)
5
To adjust the hour, press the
or
button
and then press the ENTER button. Press the
or
button once to advance the time by 1 hour. Hold
it down to advance continuously.
6
To adjust the minutes, press the
or
button
and then press the ENTER button. Press the
or
button once to advance the time by 1 minute.
Hold it down to advance the time by 5 minutes interval.
To confi rm the time display:
Press the CLOCK/TIMER button. The time display will appear for
about 5 seconds.
Notes:
z
When power supply is restored after unit is plugged in again
or after a power failure, con
rm the clock, if required, reset the
clock from step 1 onward.
z
The clock will continue counting for a few hours should there be
a power failure or the AC power cord becomes disconnected.
To readjust the clock:
Perform “Setting the clock” from step 1. If the “CLOCK” does
not appear in step 2, step 4 (for selecting the 12-hour or 24-hour
display) will be skipped.
To change the 12-hour or 24-hour display:
1
Clear all the programmed contents. [Refer to “Factory
reset, clearing all memory” on page 14 for details.]
2
Perform “Setting the clock” from step 1 onward.
Timer and sleep operation (Remote
control only)
Timer playback:
The unit turns on and plays the desired source (CD, TUNER, USB,
iPod, AUDIO IN) at a preset time.
This unit has 2 types of timer: ONCE TIMER and DAILY
TIMER.
Once timer:
Once timer play works for one time only at a preset time.
(“ ” indicator).
Daily timer:
Daily timer play works at the same preset time every day. For
example, set the timer as a wake-up call every morning.
(“DAILY” indicator).
Using the once timer and daily timer in combination:
For example, use the once timer to listen a radio program, and use
the daily timer to wake up.
1
Set the daily timer (pages 12 - 13).
2
Set the once timer (pages 12 - 13).
1 minute or more
Daily timer
Once timer
Start
Stop
Start
Stop
Timer playback
Before setting timer:
z
Check that the clock is set to the correct time (refer left
column). If it is not set, you cannot use the timer function.
z
For timer playback: Plug in USB or load discs or dock
iPod to be played.
1
Press the POWER ON/STAND-BY button to turn the power
on.
2
Press and hold the CLOCK/TIMER button.
3
Within 10 seconds, press the
or
button to select
“ONCE” or “DAILY”, and press the ENTER button.
4
Within 10 seconds, press the
or
button to select
“TIM.SET”, and press the ENTER button.
5
To select the timer playback source (CD, TUNER, USB, iPod,
AUDIO IN), press the
or
button.
When you select the tuner, select a station by pressing the
or
button, and then press the ENTER button.
If a station has not been programmed, “NOPRESET” will be
displayed and timer setting will be canceled.
6
Press the ENTER button to adjust the hour. Press the
or
button and then press the ENTER button.
7
To adjust the minutes, press the
or
button and
then press the ENTER button.
8
Set the time to
nish as in steps 6 and 7 above.
9
Adjust the volume using the VOLUME control, and then press
the ENTER button. Do not turn the volume up too high.
10
Press the POWER ON/STAND-BY button to enter the power
stand-by mode. The “TIMER” indicator lights up and the unit is
ready for timer playback.
REMOTE
SENSOR
TIMER
11
When the preset time is reached, playback will start. The
volume will increase gradually until it reaches the preset
volume. The timer indicator will blink during timer playback.
12
When the timer end time is reached, the system will enter the
power stand-by mode automatically.
Once timer:
The timer will be canceled.
Daily timer:
The timer operates at the same time every day. It will continue
until the daily timer setting is canceled. Cancel the daily timer
when it is not in use.
Notes:
z
When performing timer playback using another unit connected
to the USB/iPad terminal or AUDIO IN jack, select “USB” or
“AUDIO IN” in step 5. However, if the source is set to USB,
make sure there is no iPod or iPhone docked to the unit.
z
This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit will not turn on or off.
To stop the timer playback, follow step
“Cancelling the timer
setting”
on page 13.
E-13
Timer and sleep operation (Remote
control only) (continued)
Checking the timer setting:
1
Turn the power on and press and hold down the CLOCK/TIMER
button.
2
Within 10 seconds, press the
or
button to select
“ONCE” or “DAILY”, and press the ENTER button.
3
Within 10 seconds, press the
or
button to select
“TIM.CALL”, and press the ENTER button.
Cancelling the timer setting:
1
Turn the power on and press and hold down the CLOCK/TIMER
button.
2
Within 10 seconds, press the
or
button to select
“ONCE” or “DAILY”, and press the ENTER button.
3
Within 10 seconds, press the
or
button to select
“TIM.OFF”, and press the ENTER button. Timer will be canceled
(the setting will not be canceled).
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To reuse
the same setting, perform the following operations.
1
Turn the power on and press and hold down the CLOCK/TIMER
button.
2
Within 10 seconds, press the
or
button to select
“ONCE” or “DAILY”, and press the ENTER button.
3
Within 10 seconds, press the
or
button to select
“TIM.ON” , and press the ENTER button.
4
Press the POWER ON/STAND-BY button to enter the power
stand-by mode.
Sleep operation
The radio, compact disc, iPod, USB, and Audio In function can all
be turned off automatically.
1
Play back the desired sound source.
2
Press the SLEEP button.
3
Within 5 seconds, press the Numeric button to set the time. (1
minute ~ 99 minutes)
4
“SLEEP” will appear.
5
The unit will enter the power stand-by mode automatically after
the preset time has elapsed. The volume will be turned down 1
minute before the sleep operation
nishes
To confi rm the remaining sleep time:
1
While “SLEEP” is indicated, press the SLEEP button.
To cancel the sleep operation:
Press the POWER ON/STAND-BY button while “SLEEP” is
indicated. To cancel the sleep operation without setting the unit to
the stand-by mode, proceed as follows.
1
While “SLEEP” is indicated, press the SLEEP button.
2
Within 5 seconds, press the “0” button twice until “SLEEP 00”
appears.
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
1
Set the sleep time (see above, steps 1 - 5).
2
While the sleep timer is set, set the timer playback (steps 2 - 9,
page 12).
Sleep timer
setting
Timer playback
setting
End time
1-99 minutes
Desired time
Sleep operation will
automatically stop
Timer playback start time
Troubleshooting chart
Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following before
calling your authorized SHARP dealer or service center.
General
Symptom
Possible cause
z
The clock is not set to
the correct time.
z
A power failure occured.
z
Reset the clock. (Refer page
12)
z
When a button is
pressed, the unit does
not respond.
z
Set the unit to the power
stand-by mode and then turn
it back on.
z
If the unit still malfunctions,
reset it. (Refer page 14)
z
No sound is heard.
z
The volume level is set to
“MIN”.
z
The headphones are
connected.
z
Sound too low or
distorted.
z
Power suddenly shuts
down.
z
The batteries are depleted.
Change the batteries.
CD player
Symptom
Possible cause
z
Playback does not start.
z
Playback stops in
the middle or is not
performed properly.
z
The disc is loaded upside
down.
z
The disc does not satisfy the
standards.
z
The disc is distorted or
scratched.
z
Playback sounds are
skipped, or stopped in
the middle of a track.
z
The unit is located near
excessive vibrations.
z
A very dirty disc has been used.
z
Condensation has formed
inside the unit.
z
Volume level is too high. Adjust
to lower volume.
Remote control
Symptom
Possible cause
z
The remote control does
not operate.
z
The AC power cord of the unit
is not plugged in.
z
Wrong battery polarity.
z
The batteries are exhausted.
z
The distance or angle is
incorrect.
z
The remote control sensor
receives strong light or sunlight.
Tuner
Symptom
Possible cause
z
The radio makes
unusual noises
continuously.
z
The unit is placed near the TV
or computer.
z
The FM antenna is not properly
extended or positioned.
E-14
USB
Symptom
Possible cause
z
Device cannot be
detected.
z
There is no MP3/WMA
le
inside the device.
z
The device is not properly
connected.
z
A MTP device is connected.
z
The device contains AAC
le
only.
z
Playback does not start.
z
A copyright-protected WMA or
false MP3
le is being played
back.
z
Wrong time display.
z
Wrong
le name display.
z
A Variable Bitrate
les are being
played back.
z
The File Name was written in
other than English characters.
iPod, iPhone or iPad
Symptom
Possible cause
z
No sound is produced.
No image appears on
the TV/monitor.
z
The iPod, iPhone or iPad is not
playing.
z
The iPod, iPhone or iPad is not
properly connected to the unit.
z
The AC power cord of the unit
is not plugged in.
z
The video cable is not properly
connected.
z
The TV/monitor’s input
selection is not properly set.
z
The iPod TV out feature has not
been set to output video.
z
USB/iPad terminal does not
support video.
z
iPod, iPhone or iPad will
not charge.
z
The iPod, iPhone or iPad is
not making full contact with the
connector.
z
Using iPod (3rd generation).
z
The iPod or iPhone is not
supported. Refer to page 5 for
compatible models.
z
“This accessory is
not made to work
with iPhone” or “This
accessory is not
supported by iPhone”
appears on iPhone
screen.
z
The iPhone battery is low.
Please charge the iPhone.
z
iPhone is not properly docked.
Condensation
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation inside
the cabinet (CD pickup, etc.) or on the transmitter on the remote
control. Condensation can cause the unit to malfunction. If this
happens, leave the power on with no disc in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
If problem occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1
Set the unit to the stand-by mode and turn the power on again.
2
If the unit is not restored in the previous operation, unplug and
plug in the unit again, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory
by resetting it.
Factory reset, clearing all memory
1
Press the POWER ON/STAND-BY button to enter the power
stand-by mode.
2
While pressing down the VOLUME + button, press the POWER
ON/STAND-BY button until “RESET” appears.
POWER
ON/STAND-BY
Caution:
This operation will erase all data stored in memory including clock,
timer settings and tuner preset.
Care of compact discs
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface.
Follow the guidelines below for maximum enjoyment from your
CD collection and player.
z
Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
z
Keep your discs away from direct sunlight, heat, and excessive
moisture.
z
Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight
out from the center, along the radius.
NO
YES
Correct
Maintenance
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
z
Do not use chemicals for cleaning (gasoline, paint thinner, etc.).
It may damage the cabinet.
z
Do not apply oil to the inside of the unit. It may cause
malfunctions.
Troubleshooting chart (continued)
E-15
As part of our policy of continuous improvement, SHARP reserves
the right to make design and speci
cation changes for product
improvement without prior notice. The performance speci
cation
gures indicated are nominal values of production units. There
may be some deviations from these values in individual units.
General
Power source
AC 120 V ~ 60 Hz
15 V
(UM/SUM-1, R20) x 10
DC IN 12 V
Power
consumption
AC: Power on: 30 W
DC 12 V: 4.5 A
Dimensions
Width: 30 - 5/16’’ (750 mm)
Height: 10 - 13/16” (275 mm)
Depth: 11 - 1/16” (280 mm)
Weight
(without
batteries and
accessories)
16.8 lbs. (7.6 kg)
Weight
(with batteries)
Approximately 20.2 lbs (9.2 kg)
Amplifi er
Output power
Front speaker:
RMS: Total 34 watt (17 W per channel
into 3 ohms at 1 kHz, 10% T.H.D.)
FTC: 12.5 watt minimum RMS per
channel into 3 ohms from 200 Hz to
20 kHz, 10% T.H.D.
Subwoofer:
RMS: Total 66 watt into 3 ohms
at 100 Hz, 10% T.H.D.
FTC: 50 watt minimum RMS into
3 ohms from 70 Hz to 200 Hz, 10%
T.H.D.
Output terminals
Video output: 1 Vp-p
Headphones: 16
- 50
(recommended: 32
)
Input terminals
Audio In (audio signal):
500 mV/47 k ohms
Mic Input: 200
- 2 k
Ø 1/4” (6.3 mm)
Guitar: 100 k
- 1 M
Ø 1/4” (6.3 mm)
CD player
Type
Single disc multi-play compact disc
player
Signal readout
Non-contact, 3-beam
semiconductor laser pickup
D/A converter
Multi bit D/A converter
Frequency
response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
USB (MP3 / WMA)
USB host interface
z
Complies with USB 1.1 (Full
Speed)/2.0 Mass Storage Class.
z
Support Bulk only and CBI protocol.
Support fi le
z
MPEG 1 Layer 3
z
WMA (Non DRM)
Bitrate support
z
MP3 (32 ~ 320 kbps)
z
WMA (64 ~ 160 kbps)
Other
z
Maximum total number of MP3/WMA
les is 65025.
z
Maximum total number of folders is
999 INCLUSIVE of root directory.
z
The ID3TAG information supported
are TITLE, ARTIST and ALBUM only.
z
Supports ID3TAG version 1 and
version 2.
File system
support
z
Support USB devices with
Microsoft Windows/DOS/FAT 16/
FAT 32.
z
2 kbyte block length for sector.
Tuner
Frequency range
FM: 87.5 - 108 MHz
Preset
40 (FM station)
Speaker
Type
2-way type speaker system
Front Speakers:
3-1/8” (8 cm) - 3
- Full Range
Subwoofer: 5- 1/8” (13 cm) - 6
- Woofer (light-up)
Maximum input
power
Front Speakers: 34W / Channel
Subwoofer: 66W / Channel
Rated input power
Front Speakers: 17W / Channel
Subwoofer: 33W / Channel
Specifications
GX-M10H_OM_USA_EN_A1.indd 1
GX-M10H_OM_USA_EN_A1.indd 1
2012-11-07 07:04:21
2012-11-07 07:04:21
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
