Page 2 - Table of Contents
Introduction: This ice machine is the result of Scotsman’sdecades of experience in the design andmanufacturing of both commercial and residentialice machines. This manual includes the information needed toinstall, start up and maintain the ice machine. Noteany Caution or Warning indicators, as they ...
Page 3 - Specifications; KKPF
Specifications This ice machine is designed to be used indoors, ina controlled environment. Use outside of the listedlimitations is misuse and will void the warranty. Air temperature limits The ice machine will operate adequately within thelimits, but functions best in temperatures between70 and 80 ...
Page 4 - Cabinet Layout
Cabinet Layout November 2009 Page 4 SCCG30 & SCCP30User Manual 14 7/8" AIR IN AIR OUT .75 SHEET METAL DOOR FRONT.63 MIN. CABINET DOOR 29 1/4" 1" LEG ADJUSTMENT (4) PLACES 33 3/8" MIN. 34 3/8" MAX. 22" 2 3/4" 4" 3 3/4" 1 1/2" 2 1/2" 3 1/4" 7 3/8"...
Page 5 - Air flow; Air Intake
Air flow The machine takes in room temperature air at thelower right front and discharges warm air from thelower left front. Restricting the airflow will adverselyaffect the ability of the ice machine to make ice. Scotsman Ice Systems are designed andmanufactured with the highest regard for safetyan...
Page 6 - Filters and Treatment
Water Quality: All water, including potable water supplied bymunicipalities, contains some impurities orminerals. Water absorbs impurities from the air asrain and/or as it flows through the ground. Some ofthe impurities are solid particles, these are knownas suspended solids, and a fine particle fil...
Page 7 - Door Panel; Door Panel Attachment; Custom Panel
Door Panel The ice machine is supplied without a conventionaldoor covering so it can be decorated to the user ’spreference. Scotsman offers several coveringsincluding white, black and stainless steel. Inaddition, a custom built panel can be placed ontothe door. Door Panel Attachment To attach a Scot...
Page 9 - Door swing change; Installation Notes; Built In Situations
Door swing change Note: Prior models had separate hinge bracketsand different directions to change swing. Moving the hinges allows the door to open fromeither the left or right side. Change swing beforeattaching door panel. To change: 1. Remove innermost screw holding each hingeto cabinet, loosen th...
Page 10 - Water; Drain Pump Model drain installation
Water Water Supply, all models: The recommended watersupply tubing is ¼ inch OD copper. Stainless steelflex or reinforced PVC tube may also be used.Install an easily accessible shut-off valve betweenthe supply and the unit. This shut-off valve shouldnot be installed behind the unit. Note: Do not use...
Page 11 - Gravity Drain; Back View, Gravity Drain Model
Gravity Drain Caution: Restrictions in the drain system to themachine will cause water to back up into the icestorage bin and melt the ice. Gravity drain tubingmust be vented, have no kinks and slope to thebuilding drain. Air gaps are typically required bylocal code. 1. Place the ice machine in fron...
Page 12 - Electrical
Electrical The ice machine is supplied with a power cord. Donot remove the grounding pin from the cord’s plug.Do not use extension cords. Follow all codes.Connect the machine to its own 115 volt, 15 ampcircuit. 1. If the electrical outlet for the ice maker is behindthe unit, plug in the unit. 2. Pos...
Page 13 - Use; How to clean the cabinet.
Use No special instructions are needed for use. Justtake as much ice as you need, the machine willreplace it. A scoop is provided, and it can be stored in the machine using the loop of tubing on the rightside as a holder. What shouldn’t be done? Never keep anything in the ice storage bin that isnot ...
Page 14 - How to clean the condenser.; Winterizing
How to clean the condenser. The condenser is like the radiator on a car, it hasfins and tubes that can become clogged. To clean: 1. Remove the kickplate. 2. Locate the condenser surface. 3. Vacuum the surface, removing all dust and lint. Caution: Do not dent the fins. 4. Replace the kickplate. Winte...
Page 16 - SCOTSMAN ICE SYSTEMS; Corporate Woods Parkway
17-3191-01 Rev. B SCOTSMAN ICE SYSTEMS 101 Corporate Woods Parkway Vernon Hills, IL 60061 800-726-8762 www.scotsman-ice.com