Page 2 - Use this camera in the following order.; Set up the camera driver; Thank you for buying a Samsung Digital Camera.
Ś 1 ś Instructions Getting to know your camera ƅ Use this camera in the following order. Set up the camera driver Take a picture Insert the USB cable Check [Removable Disk] Before connecting the camera to a PC, viathe USB cable, you will need to set up thecamera driver. Install the camera driverthat...
Page 3 - There is the possibility of injury from the camera’s moving parts.
Ś 2 ś Danger Warning WARNING indicates a potentially hazardous situation which, if not avoided, couldresult in death or serious injury. ƅ Do not use the flash in close proximity to people or animals. Positioning the flashtoo close to your subject’s eyes may cause eyesight damage. ƅ For safety reason...
Page 4 - READY
Caution Contents Ś 3 ś CAUTION indicates a potentially hazardous situation which, if not avoided, mayresult in a minor or moderate injury. ƅ Leaking, overheating, or damaged battery could result in fire or injury. ҟ Use battery with the correct specification for the camera. ҟ Do not short circuit, h...
Page 5 - Contents; SOFTWARE
Ś 4 ś Contents ƅ Sharpness ŊŊŊŊŊŊŊŊŊ 30 ƅ Contrast ŊŊŊŊŊŊŊŊŊŊ 30 ƅ Auto Focus type ŊŊŊŊŊŊŊ 31 ƅ OSD (On Screen Display)information ŊŊŊŊŊŊŊŊŊ 31 ƀ Sound ŊŊŊŊŊŊŊŊŊŊŊ 32 ƅ Volume ŊŊŊŊŊŊŊŊŊŊŊ 32 ƅ Start up sound ŊŊŊŊŊŊŊŊ 32 ƅ Shutter sound ŊŊŊŊŊŊŊŊ 32 ƅ Beep Sound ŊŊŊŊŊŊŊŊŊ 32 ƅ AF sound ŊŊŊŊŊŊŊŊŊŊ 32 ƀ...
Page 6 - System chart
Ś 5 ś System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact yournearest Samsung dealer or Samsung service centre. Software CD (see p.84) Camera strap User manual, Product war...
Page 7 - Identification of features
Ś 6 ś Identification of features Shutter button Flash Self-timer lamp / Auto focus lamp Lens / Lens cover Mode dial Power button Speaker Microphone DC input connection port USB / AV connection terminal Front & Top
Page 10 - Important information about battery usage; INFORMATION
Connecting to a Power Source Ś 9 ś Identification of features ƅ We recommend using battery supplied with the camera. The available batteriesare listed below. - Non rechargeable batteries : 2 X AA Alkaline (High Capacity)- Rechargeable batteries : SNB-2512 (Ni-MH) ƅ SNB-2512 specification(optional) ƅ...
Page 12 - Instructions on how to use the memory card; Samsung cannot be held responsible for lost data.
Instructions on how to use the memory card Ś 11 ś ƀ Do not use a memory card formatted by another digital camera or memory cardreader. ƀ If the memory card is subjected to any of the following, the recorded data maybecome corrupted : - When the memory card is used incorrectly.- If the power is switc...
Page 14 - When Using the Camera for the First Time
Ś 13 ś When Using the Camera for the First Time ƅ Charge the rechargeable battery fully before using the camera for the first time. ƅ When the camera is turned on for the first time, a menu will be displayed to setdate / time, language and battery type in the LCD monitor. This menu will not bedispla...
Page 15 - LCD monitor indicator; ڨ ک
Ś 14 ś LCD monitor indicator [ Image & Full Status ] ƅ The LCD monitor displays information about the shooting functions andselections. No. Description Icons Page 7 Sharpness p.30 8 Auto focus frame p.31 9 Camera shake warning p.20 10 Date/ Time 2007/01/01 01:00 PM p.33 11 Exposure compensation ...
Page 16 - Starting the recording mode; How to use the PROGRAM mode ( )
Ś 15 ś Starting the recording mode ƅ How to use the PROGRAM mode ( ) Selecting the automatic mode will configure thecamera with optimal settings. You can still manuallyconfigure all functions except the aperture valueand shutter speed. 1. Select the PROGRAM mode by rotating the mode dial. 2. Press t...
Page 21 - Things to Watch Out for When Taking Pictures; Pressing the shutter button down half way.
Ś 20 ś Things to Watch Out for When Taking Pictures ƅ Pressing the shutter button down half way. Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture. [ Lightly press the shutter button ] [ Press the shutter button ] ƅ ...
Page 22 - Using the camera buttons to set the camera
Ś 21 ś ZOOM W / T button ƀ If the menu is not displayed, this button worksas the OPTICAL ZOOM or DIGITAL ZOOMbutton. ƀ This camera has a 3X optical zoom and a 5X digital zoom function. Using both will offer a total zoom ratio of 15X. ƀ TELE Zoom Optical zoom TELE : Pressing the ZOOM T button. This w...
Page 25 - Focus lock
Ś 24 ś Macro ( ) / Down button ƅ Available focusing method, by recording mode (O: Selectable , X: Not selectable, ∞ : Infinity focus range) O O O O O O O X O X O X X O O X X X X X X - - - - Mode Normal Macro Auto Macro Normal Macro Auto Macro Mode Normal Macro Auto Macro Mode SCENE O Ũ X X Ũ X X O O...
Page 29 - Using the LCD monitor to set the camera settings
Ś 28 ś Using the LCD monitor to set the camera settings ƅ You can use the menu on the LCD monitor to set up recording functions. In anymode with the exception of VOICE RECORDING mode, pressing the MENUbutton displays the menu on the LCD monitor. ż The menu will not be displayed on the LCD monitor in...
Page 31 - How to use the menu
Ś 30 ś Recording ( ) [ Sharpness ] ƅ You can adjust the sharpness of the picture youwant to take. You cannot check the sharpnesseffect on the LCD monitor before you take a picture,because this function is applied only when thecaptured image is stored on the memory. [ PROGRAM mode ] [ Contrast ] ƅ Yo...
Page 33 - You can select the shutter sound.
Ś 32 ś Sound ( ) [ Volume ] ƅ You can set select a volume of sound, start upsound, shutter sound, warning sound and AF sound. ƀ [Volume] sub menu: [Off], [Low], [Medium], [High] [ Beep Sound ] ƅ If you set sound to ON, various sounds will beactivated for camera startup, when buttons arepressed, so t...
Page 38 - Movie clip mode : You can select the colour menu.
Ś 37 ś ƀ This button will not operate in ASR, Voice recording mode and some scenemodes (Night, Text, Sunset, Dawn, Backligh, Fireworks, Beach&Snow). ƀ If a menu among the colour, image editing and Fun menu, any previouslyselected effect is cancelled automatically. ƀ Even if the camera is turned ...
Page 39 - Press the shutter button to capture an image.
Ś 38 ś Special Effect (E button) : Colour 3. Select a desired sub menu by pressing the Up/ Down button and press the OK button. : No effect is added to the image: Captured images will be stored in black and white.: Captured images will be stored in a sepia tone (a gradient of yellowish brown colours...
Page 40 - Change the saturation by pressing the Left / Right button.; Saturation; Preset focus frames
Ś 39 ś Special Effect (E button) : Image editing Special Effect (E button) : FUN ƅ You can change the saturation of the image. Press the E button in an available mode ( , , , , , ). Select Saturation menu ( ) and a bar for changingthe saturation will display. Change the saturation by pressing the Le...
Page 41 - You can combine 2 - 4 different shots in a still image.; Composite shooting
Ś 40 ś Special Effect (E button) : FUN Select a desired menu by pressing the Left / Right button and press the OKbutton. ƅ You can combine 2 - 4 different shots in a still image. ƀ Press the E button in an available mode ( , , , , , ). ƀ You can use the flash button, self-timer button, macro button,...
Page 42 - Press the shutter button to capture a new image.; Selecting 2 composite shooting
Ś 41 ś Special Effect (E button) : FUN To save the composite shots, press the OK button after taking the last shot. ƀ Changing a part of composite shot before taking the last shotBefore taking the last composite shot, you can change a part of composite shot. 1. During the composite shots, press the ...
Page 45 - Size
Ś 44 ś Size ƅ You can select the image size appropriate for your application. ƀ The higher the resolution, the lower the number of shots available becausehigh resolution images require more memory. INFORMATION [ STILL IMAGE mode ] [ MOVIE CLIP mode ] 6 3072X2304 SIZE 00:00:10 640X480 SIZE + / - butt...
Page 46 - Metering
Ś 45 ś Icon Sub menu Super Fine Fine Normal 30FPS 15FPS File Format jpeg jpeg jpeg avi avi [ STILL IMAGE mode ] [ MOVIE CLIP mode ] ƅ You can select the compression ratio appropriate for your application of thecaptured images. The higher the compression ratio, the lower the picture quality. STILL IM...
Page 47 - : The camera's sensitivity is automatically; Continuous shot; : Take three pictures in a series in different exposures: standard
Ś 46 ś ISO - AUTO : The camera's sensitivity is automatically changed by variables such as lighting value orsubject brightness. - 80, 100, 200, 400, 800, 1000 : You can increase the shutter speed while the same amount of light is present, by increasing the ISO sensitivity. However,the image may be s...
Page 48 - White balance
Ś 47 ś White balance AUTO : The camera automatically selects the appropriate whitebalance settings, dependingon the prevailing lightingconditions. DAYLIGHT : For taking images outside. CLOUDY : For taking images under a cloudy and overcast sky. Fluorescent H : For shooting under daylight fluorescent...
Page 49 - Exposure compensation; Starting play mode
Ś 48 ś Exposure compensation ƅ Exposure compensation : This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the + / - button. ƀ Compensating Exposure 1. Press the + / - button, and then use the UP and DOWN button...
Page 62 - Composite image
Ś 61 ś Special Effect (E button) : FUN ƀ Moving and changing the focus frameYou can change the focus frame after selecting a Range menu. 1. Select a focus frame by pressing the Left / Right button and press the OK button. 2. Move the location of the frame by pressing the 5 function button. 3. Press ...
Page 67 - Deleting Images in Thumbnail Display Mode
Ś 66 ś ƀ Deleting Images in Thumbnail Display Mode 1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you want to delete, and then press the DELETE ( ) button. 2. A message will display on the LCD monitor as shown below.3. Select the sub menu values by pressing the LEFT/ RIGHT button a...
Page 68 - Setting up the play back function using the LCD monitor
Ś 67 ś Setting up the play back function using the LCD monitor ƅ PLAY mode functions can be changed by using the LCD monitor. In the PLAYmode, pressing the MENU button displays the menu on the LCD monitor. Themenus you can set up in Play mode are as follows. To capture an image aftersetting up the p...
Page 75 - start from after the last stored file name.; : You can check shooting information about the displayed image.; On Screen Display information
Ś 74 ś ƀ When this menu is selected without inserting a memory card, the [No Card]message will display. ƀ If there is not enough space available in the memory card to copy savedimages in the internal memory (16MB), the [Copy To Card] command willcopy only some of the images and display [Memory Full!...
Page 76 - Easy printing; PictBridge; Connecting the Camera to a Printer
Ś 75 ś ż If the [USB] menu is set to the [Computer], you cannot connect a Pictbridgecompatible printer to the camera through USB cable with [Connecting Computer]message. By pressing the Printer button, at this point, you can connect the easyprinting mode with [Connecting Printer] message. In some in...
Page 78 - Important notes
Ś 77 ś PictBridge : Reset ƅ Initialises user-changed configurations. 1. Use the Up / Down buttons to select the [Reset] menu tab. And then press the Right button. 2. Use the Up / Down buttons to select the desired sub menu value, and then press the OK button. If [Yes] is selected : All print and ima...
Page 79 - Extremes in temperature may cause problems.
Ś 78 ś Important notes ƅ Extremes in temperature may cause problems. - If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turnthe camera off and wait for at least 1 hour until all moisture is dispersed...
Page 81 - Before contacting a service centre
Ś 80 ś Before contacting a service centre Battery power quickly drains Ϗ The Camera is being used in low temperatures Ɗ Keep the camera in warm conditions (i.e. inside a coat or jacket) and onlyremove it in order to take images Camera does not take images when pressing the Shutter button Ϗ There is ...
Page 83 - Specifications
Ś 82 ś ƅ Exposure - Control : Program AE Metering : Multi, Spot - Compensation : Ţ 2EV (1/3EV steps) - ISO Equivalent : S730-Auto, 80, 100, 200, 400, 800, 1000 S750/S73/S630-Auto, 80, 100, 200, 400 ƅ Flash - Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off - Range : Wi...
Page 86 - Setting up the application software; You can visit the Samsung web-site through the internet.
Ś 85 ś Setting up the application software ƅ To use this camera with a PC, install the application software first.After this has been done, the stored images in the camera can be moved to thePC and can be edited by an image editing program. ƅ You can visit the Samsung web-site through the internet. ...
Page 88 - Starting PC mode
Ś 87 ś ƅ Connecting the camera to a PC ƅ Disconnecting the camera and PC : Refer to page 89 (Removing the removabledisk). ż If you selected [Printer] in Step 5, when you connect the camera to your computer, the [Connecting Printer] message will display and the connectionwill not be established. In t...
Page 89 - CAUTION
Ś 88 ś ƅ Downloading stored images You can download the still images stored on the camera to your PC's hard diskand print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 3. Select an image and press the right mouse button. 4. A pop-up menu will...
Page 90 - Removing the removable disk; Check whether the camera and PC are transferring a file.
Ś 89 ś 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and theremovable disk will be removed safely. 7. Unplug the USB cable. Removing the removable disk ƅ Windows 98/98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please ...
Page 91 - Using the USB Driver for MAC; Select an image file and copy or move it to MAC.; To remove the USB driver, refer to the process shown below.; Removing the USB Driver for Windows 98SE; A USB Driver for MAC is not included with the software CD as MAC OS; Setting up the USB Driver for MAC
Ś 90 ś Using the USB Driver for MAC 1. Double click a new icon on the desktop and the folder in the memory will be displayed. 2. Select an image file and copy or move it to MAC. ƀ For Mac OS 10.0 or later : First complete uploading from computer to camera and then remove the removable diskwith the E...
Page 92 - Digimax Master
Ś 91 ś Digimax Master 4. Select a destination and make a folder to save downloaded images and folders. - Folder names can be made in order of date and images will be downloaded. - Folder name will be made as you want and images will be downloaded. - After selecting a folder that was made before, ima...
Page 95 - FAQ
Ś 94 ś FAQ Case 6 When I open the Device Manager (by clicking Start Ɗ (Settings) Ɗ Control Panel Ɗ (Performance and Maintenance) Ɗ System Ɗ (Hardware) Ɗ Device Manager), there are Unknown Devices or Other Devices entries with a yellow question mark(?) beside them or deviceswith an exclamation mark(!...
Page 96 - FCC notice; the receiver is connected.; Declaration of Conformity; Trade Name; Correct Disposal of This Product
Ś 95 ś FCC notice ƅ ƅ NOTE : This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to pro-vide reasonable protection against harmful interference in aresidential installation.This equipment gener...
