Page 2 - Use this camera in the following order; Set up the camera driver; Open Window
《 1 》 Instructions Getting to know your camera ■ Use this camera in the following order Set up the camera driver Take a picture Insert the USB cable Check the camera’s power Check [Removable Disk] Before connecting the camera to a PC, viathe USB cable, you will need to set up thecamera driver. Insta...
Page 3 - There is the possibility of injury from the camera’s moving parts.
Danger Warning 《 2 》 WARNING indicates a potentially hazardous situation which, if not avoided, couldresult in death or serious injury. ■ Do not use the flash in close proximity to people or animals. Positioning the flashtoo close to your subject’s eyes may cause eyesight damage. ■ For safety reason...
Page 4 - READY
《 3 》 Contents Caution CAUTION indicates a potentially hazardous situation which, if not avoided, mayresult in a minor or moderate injury. ■ Leaking, overheating, or burst battery could result in fire or injury. • Use battery with the correct specification for the camera. • Do not short circuit, hea...
Page 5 - Contents; SOFTWARE
《 4 》 Contents ■ Photo Frame …………………… 32 ■ Fn button ………………………… 33 ■ Size ……………………………… 34 ■ Quality / Frame rate …………… 34 ■ Metering ………………………… 35 ■ Continuous shot ………………… 35 ■ ISO ……………………………… 36 ■ White balance …………………… 36 ■ Exposure compensation ……… 37 ■ Long Time shutter ……………… 38 ■ Movie Clip ...
Page 6 - System chart
《 5 》 System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact yournearest Samsung dealer or Samsung service centre. Software CD (see p.81) Camera strap User manual, Product war...
Page 7 - Identification of features
《 6 》 Identification of features Front & Top Self timer lamp Microphone Shutter button Lens Flash Power button
Page 8 - Back
《 7 》 Identification of features Back LCD monitor 5-function button M (Mode) button E (Effects) button Zoom T button (Digital zoom) Camera Status Lamp Fn / Delete button Camera Strap Playback mode / Printer button Zoom W button (Thumbnail)
Page 10 - Connecting to a Power Source
《 9 》 ■ Mode icon : Refer to page 16 for more information about the camera mode setting. Model SLB-0637 Type Lithium Ion Capacity 660mAh Voltage 3.7V Charging time Approx. 90 MIN (Using the SBC-L7) ■ You should use the rechargeable battery (SLB-0637) supplied with the camera. ■ SLB-0637 rechargeable...
Page 11 - Important information about battery usage; INFORMATION
《 10 》 Battery life Number of images Recording time Approx. 75 MIN Approx. 150 Approx. 65 MIN Using the fully charged battery Auto mode 7M image size Fine image quality Shot to shot interval : 30Sec. Changing the zoom position between the Wide and the Tele ends every 1 shot. Using the flash every tw...
Page 14 - Instructions on how to use the memory card; Samsung cannot be held responsible for lost data.; Please keep the memory card in its case when not in use.
《 13 》 Instructions on how to use the memory card ● Do not use a memory card formatted by another digital camera or memory cardreader. ● If the memory card is subjected to any of the following, the recorded data maybecome corrupted : - When the memory card is used incorrectly.- If the power is switc...
Page 15 - Recorded image size Super Fine
Recorded image size Super Fine Fine Normal 30FPS 15FPS 71 139 206 - - 79 156 230 - - 94 184 270 - - 99 193 284 - - 156 301 435 - - 435 681 979 - - - - - About 10' About 16' - - - About 34' About 39' 《 14 》 [SD (Secure Digital) memory card] Write protect switch Label Card pins ■ The camera can use SD...
Page 16 - LCD monitor indicator; Exposure compensation / LongTime Shutter
《 15 》 LCD monitor indicator [Image & Full Status] ■ The LCD monitor displays information about the shooting functions and selections. No. Description Icons Page 2 Saturation p.28 3 Flash / Mic. Off p.23/17 4 Self-timer p.25 Recording mode p.9 1 No. Description Icons Page 5 Macro p.22 6 Contrast...
Page 18 - Starting the recording mode
《 17 》 Starting the recording mode ■ How to use the Movie clip mode A movie clip can be recorded for as long as the available recording time of thememory capacity allows. 1. Select the Movie clip mode by pressing the M (Mode) button (p.26). 2. Point the camera towards the subject and compose the ima...
Page 19 - How to use the Program mode
《 18 》 Starting the recording mode ■ How to use the Program mode Selecting the automatic mode will configure the camera with optimal settingsand you can manually configure various functions. 1. Select the Program mode by pressing the M (Mode) button (p.26). 2. Point the camera towards the subject an...
Page 21 - Using the camera buttons to set the camera
《 20 》 Using the camera buttons to set the camera ZOOM W / T button ■ The recording mode function can be set up by using the camera buttons. ● Used for turning the camera’s power on / off. ● If there is no operation during the specified time,the camera's power will be turned offautomatically to save...
Page 23 - Mode
《 22 》 Macro ( ) / Down button ■ While the menu is showing, press the DOWN button to move from the mainmenu to a sub menu, or to move down the sub menu. When the menu is notshowing, you can use the MACRO / DOWN button to take macro pictures. The distance ranges are shown below. Press the Macro butto...
Page 24 - Focus lock; Auto macro
《 23 》 Macro ( ) / Down button ■ Available focusing method, by recording mode ( ● : Selectable, ∞ : Infinity focus range) ■ To focus on a subject not positioned in the centre of the picture, use the focuslock function. ● Using the Focus Lock 1. Ensure the subject is in the centre of the autofocus fr...
Page 28 - Movie clip mode : You can select the colour menu.
《 27 》 ● This button will not operate in EPS, Voice recording mode and some scenemodes (Night, Text, Sunset, Dawn, Backligh, Fireworks, Beach&Snow). ● If a menu between the colour and image editing is selected, any previouslyselected effect is cancelled automatically. ● Even if the camera is tur...
Page 29 - You can change the saturation of the image.; Saturation
《 28 》 ■ Custom colour : You can change the R (Red), G (Green) and B (Blue) values ofthe image. - OK button : Select / setup the Custom Colour - Up / Down button : Selects R, G, B- Left / Right button : Changes the values Custom Color Move Set OK Special Effect (E button) : Image editing ■ You can c...
Page 30 - To take an image, press the shutter button.
《 29 》 Preset focus frames ■ You can make the subject stand out from its surroundings. The subject will besharp and in focus while making the rest out of focus. ● Press the E button in an available mode. (p.27) ● This menu can be selected in the 3M, 1M image size. Select a proper menu by pressing th...
Page 31 - You can combine 2 - 4 different shots in a still image.; Composite shooting
6 100-0031 6 《 30 》 Special Effect (E button) : FUN Select a desired menu by pressing the Left / Right button and press the OKbutton. ■ You can combine 2 - 4 different shots in a still image. ● Press the E button in an available mode. (p.27) ● You can use the flash button, self-timer button, macro b...
Page 33 - Photo Frame
《 32 》 ■ You can add 9 types of frame-like borders to a still image you want to capture. ■ Date & Time information will not be printed on the stored image taken with PhotoFrame menu. ● Press the E button in an available camera modes. (p.27) ● This menu can be selected in the 5M, 3M, 1M image siz...
Page 34 - Fn button; White Balance
《 33 》 Fn button ■ You can use the Fn button to set the following menus. ( ● : Selectable) *1. This menu is only available in the Children scene mode ( ). *2. This menu is only available in the Night scene mode ( ). 6 6 6 6 ■ How to use the Fn menu 1. Press the Fn button in an available mode2. Selec...
Page 35 - Size; Movie clip
00:00:10 6 00:00:10 6 《 34 》 Size ■ You can select the image size appropriate for your application. ● The higher the resolution, the lower the number of shots available becausehigh resolution images require more memory. INFORMATION [ STILL IMAGE mode ] [ MOVIE CLIP mode ] 3072X2304 SIZE 640X480 SIZE...
Page 36 - Metering; Continuous shot
6 《 35 》 Metering ■ If you cannot obtain suitable exposure conditions, you can change the meteringmethod to take brighter pictures. - [Multi] : Exposure will be calculated based on an average of the available light inthe image area. However, thecalculation will be biased towards thecentre of the ima...
Page 37 - White balance
6 6 《 36 》 ISO - AUTO : The camera's sensitivity is automatically changed by variables such as lighting value orsubject brightness. - 50, 100, 200, 400, 800, 1600 : : You can increase the shutter speed while the same amount of light is present, by increasing the ISO sensitivity. However,the image ma...
Page 38 - Exposure compensation
《 37 》 White balance ● Using the Custom White Balance White balance settings may vary slightly depending on the shootingenvironment. You can select the most appropriate white balance setting for agiven shooting environment by setting up the custom white balance. 1. Select the CUSTOM ( ) menu of the ...
Page 39 - Long Time shutter; function; Movie Clip frame stabiliser; : Movie clip frame stabilizer function is
《 38 》 Long Time shutter ● This camera automatically adjusts the shutter speed and aperture values to theshooting environment. However, in NIGHT SCENE mode, you can set theshutter speed and aperture values to your preference. 1. Select the [Nightscene] scene mode. (p.19, 41)2. Press the Fn button an...
Page 41 - Voice Memo; Voice Recording
《 40 》 00 : 00 : 10 Voice Memo ■ You can add your voice-over to a stored stillimage. - If the voice memo indicator is displayed on the LCD monitor, the setting is completed. - Press the shutter button and take a picture. The picture is stored on the memory card. - Voice memo will be recorded for ten...
Page 42 - resume the recording.; Recording the movie clip without voice; You can record the movie without voice.; SCENE mode; Refer to page 19 for more information.
《 41 》 Voice Recording ● Pausing while recording a voiceUsing this function, you can record your favoritevoice clips into a voice recording file withouthaving to create multiple voice recording files. 1. Press the Pause button ( ) to pause recording. 2. Press the Pause button ( ) again to resume the...
Page 43 - Sound menu
《 42 》 Sound ( ) [ Volume ] ■ You can set select a volume of sound, start upsound, shutter sound, warning sound and AF sound. ● [Volume] sub menu: [Off], [Low], [Medium], [High] [ Start up sound ] ■ You can select the sound that is activatedwhenever the camera is turned on. ● Start up sound : [Off],...
Page 44 - Setup menu; PORTUGUÊS
《 43 》 [ Beep Sound ] ■ If you set sound to ON, various sounds will beactivated for camera startup, when buttons arepressed, so that you can be aware of the cameraoperation status. ● [Sound] sub menu : [Off], [Sound 1, 2, 3] [ AF sound ] ■ If you set AF sound to ON, AF sound will beactivated when a ...
Page 48 - Connecting to an external monitor
《 47 》 ● [LCD save] sub menu [Off]: The LCD monitor will not be turned off. [On]: If you select the [LCD Save] and the camera isn't operated during the specified time(about30 SEC.), the camera power will be idle(LCDmonitor : OFF, Camera status lamp :Blinking) automatically. To use the cameraagain, p...
Page 50 - Starting play mode
《 49 》 Starting play mode ■ If the memory card is inserted in the camera, all the camera functions apply onlyto the memory card. ■ If the memory card is not inserted in the camera, all the camera functions applyonly to the internal memory. ■ If you have turned on the camera by pressing the POWER but...
Page 57 - Down
《 56 》 ■ Change the resolution (size) of pictures taken. 1. Press the play mode button and press the E button. 2. Press the Left / Right button and select the [RESIZE] ( ) menu tab. 3. Select a desired sub menu by pressing the Up / Down button and press the OK button. Special Effect (E button) : Res...
Page 61 - Composite image
《 60 》 Special Effect (E button) : FUN ● Moving and changing the focus frameYou can change the focus frame after selecting a Range menu. 1. Select a focus frame by pressing the Left / Right button and press the OK button. 2. Move the location of the frame by pressing the 5 function button. 3. Press ...
Page 64 - Setting up the play back function using the LCD monitor
《 63 》 Setting up the play back function using the LCD monitor ■ PLAY mode functions can be changed by using the LCD monitor. In the PLAYmode, pressing the MENU button displays the menu on the LCD monitor. Themenus you can set up in Play mode are as follows. To capture an image aftersetting up the p...
Page 71 - Copy To Card
《 70 》 : This enables you to copy image files, movie clips and voice recording files to the memory card. 1. Select the [COPY TO CARD] menu tab by pressing the Up / Down button. And then pressthe Right button. 2. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. - [No...
Page 72 - Easy printing; PictBridge; Connecting the Camera to a Printer
《 71 》 ※ If the [USB] menu is set to the [Computer], you cannot connect a Pictbridgecompatible printer to the camera through USB cable with [Connecting Computer]message. In this case, remove the cable and do the step 1, 2 again. ■ Easy printing When you connect the camera to printer in the Playback ...
Page 74 - Important notes
《 73 》 PictBridge : Reset ■ Initialises user-changed configurations. 1. Use the Up / Down buttons to select the [Reset] menu tab. And then press the Right button. 2. Use the Up / Down buttons to select the desired sub menu value, and then press the OK button. If [No] is selected : Settings will not ...
Page 75 - Extremes in temperature may cause problems.
《 74 》 ■ Camera Maintenance - Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning fluidcan be used.Clean the camera body with a soft cloth. Do not allow this camera to come intocontact with solvent ...
Page 76 - Warning indicator
《 75 》 Warning indicator ■ There are several warnings that may appear on the LCD display. Memory Error! ㆍ Memory card error → Turn off the camera power and turn it on again → Insert the memory card again → Insert and format the memory card (p.48) Card Locked! ㆍ The memory card is locked → SD/SDHC me...
Page 77 - Before contacting a service centre
《 76 》 Before contacting a service centre The camera doesn’t switch on ㆍ There is low battery capacity → Insert fresh batteries. (p.12) ㆍ Battery is inserted incorrectly with the polarities reversed. → Insert the battery according to the polarity marks (+, -) The camera power ceases while in use ㆍ T...
Page 79 - Specifications
《 78 》 Specifications Image Sensor - Type : 1/2.5" CCD - Effective Pixel : 7.1 Mega-pixel - Total Pixel : 7.4 Mega-pixel Lens - Focal Length : NV Lens f=6.3 ~ 44.1mm (35mm film equivalent : 38 ~ 266mm) - F No. : F3.5 ~ F5.4 - Digital Zoom : · Still Image mode : 1.0X ~ 5.0X · Play mode : 1.0X ~ 9...
Page 82 - Setting up the application software; You can visit the Samsung web-site through the internet.; About the software
《 81 》 Setting up the application software ■ To use this camera with a PC, install the application software first.After this has been done, the stored images in the camera can be moved to thePC and can be edited by an image editing program. ■ You can visit the Samsung web-site through the internet. ...
Page 85 - Starting PC mode; The LCD monitor is always turned off in PC mode.
《 84 》 Setting up the application software ● If you have installed the camera driver, the [Found New Hardware Wizard]may not open. ● On a Windows 98 SE system, the Found New Hardware Wizard dialog boxopens and a window asking you to select a driver file may appear. In thiscase, specify "USB Driv...
Page 87 - directly on the PC monitor and you can copy or move the image files.; CAUTION; Click a folder where you want to paste the file.
《 86 》 Starting PC mode - By using [Digimax Master], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files. ● We recommend that you should copy the images to the PC to view them.Opening images directly from the removable disk may be subject t...
Page 88 - Removing the removable disk; Check whether the camera and PC are transferring a file.
《 87 》 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and theremovable disk will be removed safely. 7. Unplug the USB cable. Removing the removable disk ■ Windows 98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wai...
Page 89 - Using the USB Driver for MAC; Select an image file and copy or move it to MAC.; To remove the USB driver, refer to the process shown below.; Removing the USB Driver for Windows 98SE; A USB Driver for MAC is not included with the software CD as MAC OS; Setting up the USB Driver for MAC
《 88 》 Using the USB Driver for MAC 1. Double click a new icon on the desktop and the folder in the memory will be displayed. 2. Select an image file and copy or move it to MAC. ● For Mac OS 10.0 or later : First complete uploading from computer to camera and then remove the removable diskwith the E...
Page 90 - Digimax Master
《 89 》 Digimax Master 4. Select a destination and make a folder to save downloaded images and folders. - Folder names can be made in order of date and images will be downloaded. - Folder name will be made as you want and images will be downloaded. - After selecting a folder that was made before, ima...
Page 93 - FAQ
《 92 》 FAQ Case 6 When I open the Device Manager (by clicking Start → (Settings) → Control Panel → (Performance and Maintenance) → System → (Hardware) → Device Manager), there are Unknown Devices or Other Devices entries with a yellow question mark(?) beside them or deviceswith an exclamation mark(!...
Page 94 - FCC notice; the receiver is connected.; Declaration of Conformity; Trade Name; Correct Disposal of This Product
《 93 》 FCC notice ■ ■ NOTE : This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to pro-vide reasonable protection against harmful interference in aresidential installation.This equipment gener...
