Page 2 - Table of contents; Before Using the Product
2 Table of contents Before Using the Product Securing the Installation Space 4 Precautions for storage 4 Safety Precautions 4 Cleaning 5Electricity and Safety 5 Installation 6Operation 7 Preparations Parts 9 Control Panel 9 Direct Key guide 10 Function Key Guide 11 Changing Brightness, Contrast and ...
Page 4 - Securing the Installation Space; Precautions for storage; Safety Precautions; Warning
4 Securing the Installation Space Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. ― The exterior may differ depending on the product. ...
Page 5 - Cleaning; Electricity and Safety
5 Cleaning ― Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ― Take the following steps when cleaning. 1 Power off the product and computer. 2 Disconnect the power cord from the product. ― Hold the power cable by the plug and do not touch the cable with w...
Page 6 - Installation
6 Warning • DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. • Do not install the product in poorly ventilated spaces such as a bookcase or closet. • Install the product at least 10 cm away from the wall to allow ventilation. ...
Page 7 - Operation
7 Warning • There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ‒ Contact Samsung Customer Service Center for repairs. • To move the product, first disconnect all the cables from it, including the power cable. • If the product generates abnormal soun...
Page 8 - Caution
8 Caution • Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ‒ Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time. • Disconnect the power cord f...
Page 9 - Parts; Control Panel; Return; Preparations
9 Parts Control Panel ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. ― To activate the button on the product, press the / / / / etching position exactly. Press the other position may cause wrong action. Move to RI...
Page 10 - Direct Key guide
10 Brightness Auto Adjustment Features Eye Saver Mode Off • Press / button : Adjust Brightness , Contrast , Sharpness . • Press / button : Adjust the screen settings automatically. ― Changing the resolution in Display Properties will activate the Auto Adjustment function. ― This function is only ava...
Page 11 - Function Key Guide
11 Function Key Guide ― To enter the main menu or to use other items, press the button to display the Function Key Guide. You can exit by pressing the button again. Return Press / / / button: Move to the item you want. The description for each item will appear when the focus changes. Press button: T...
Page 12 - Changing Brightness, Contrast and Sharpness settings; Brightness
12 When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below. DOME Type JOG Button Power saving/Non-signal mode Source Change PRESS button for 2 seconds Power Off When the monitor displays the Main menu the JOG Bu...
Page 13 - Reverse Side; Adjusting the Product Tilt
13 Reverse Side ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Description Connects to a source device using an HDMI cable or HDMI-DVI cable. Connect to a PC using the D-SUB cable. Connects to the AC/DC adapt...
Page 15 - Installing a Wall-mount Kit or Desktop Stand
15 • Notes ‒ Using a screw longer than the standard length can damage the internal components of the product. ‒ The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications. ‒ Do not use screws that do not comply with the VESA s...
Page 16 - Attaching the Stand
16 Installation Attaching the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ― The exterior may differ depending on the product. 1 2 3 4 Insert the stand neck into the stand base in the direction shown in the figure....
Page 17 - Removing the Stand
17 1 Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards. 2 While holding the stand neck with one hand, pound the other fisted hand down onto the top of the stand base in the direction of the arrow to deta...
Page 18 - Connecting and Using a Source Device; Pre-connection Checkpoints
18 Connecting and Using a Source Device Chapter 03 Pre-connection Checkpoints ― Before connecting a source device, read the user manual provided with it.The number and locations of ports on source devices may differ from device to device. ― Do not connect the power cable before connecting all other ...
Page 19 - Connection Using the HDMI Cable; Connection Using an HDMI-DVI Cable; Connecting the Power; Power connection using integrated AC/DC adapter
19 Connection Using the HDMI Cable HDMI IN Connection Using an HDMI-DVI Cable HDMI IN Connecting the Power Power connection using integrated AC/DC adapter 1 2 3 1 Connect the AC/DC adapter to the DC 14V port on the back of the monitor. 2 Next, connect the power cable to the power outlet. 3 Press the...
Page 20 - Power connection using detachable AC/DC adapter; Correct posture to use the product
20 Power connection using detachable AC/DC adapter 1 2 3 1 Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 14V port on the back of the product. 2 Next, connect the power cable to the power outlet. 3 Press the button on the back of the monitor to turn it on. ― ...
Page 22 - Screen Setup; Sharpness
22 Screen Setup Configure the screen settings such as brightness.A detailed description of each function is provided. Refer to your product for details.The functions available may vary depending on the product model. Refer to the actual product. Chapter 04 Brightness You can adjust the general brigh...
Page 23 - In
23 Eye Saver Mode Set to an optimum picture quality suitable for eye relaxation.TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for lower blue light levels. When Eye Saver Mode is ' On ', the blue light that wavelength is around 400nm will decrease, and...
Page 24 - SAMSUNG MAGIC Angle; SAMSUNG MAGIC Upscale; Image Size
24 SAMSUNG MAGIC Angle SAMSUNG M A G I C Angle allows you to configure the settings to obtain the optimum picture quality according to your viewing angle. ― This menu is not available when SAMSUNG M A G I C Bright is set to Cinema or Dynamic Contrast mode. ― This menu is not available when Game Mode...
Page 25 - Response Time
25 HDMI Black Level If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/color degradation, black level, etc.) may occur, depending on the connected source device. In such case, HDMI Black Level can be used to adjust the image quality. If this is t...
Page 26 - Configuring Tint; Red; Green
26 Configuring Tint A detailed description of each function is provided. Refer to your product for details.Adjust the tint of the screen. This menu is not available when S A M S U N G M A G I C Bright is in Cinema or Dynamic Contrast mode. This menu is not available when Game Mode or Eye Saver Mode ...
Page 27 - Color Tone; Gamma
27 Color Tone Adjust the general color tone of the picture. • Cool 2 : Set the color temperature to be cooler than Cool 1 . • Cool 1 : Set the color temperature to be cooler than Normal mode. • Normal : Display the standard color tone. • Warm 1 : Set the color temperature to be warmer than Normal mo...
Page 28 - Resizing or Relocating the Screen; Language; Transparency
28 Resizing or Relocating the Screen A detailed description of each function is provided. Refer to your product for details.The functions available may vary depending on the product model. Refer to the actual product. Chapter 06 Language Set the menu language. ― A change to the language setting will...
Page 29 - Setup and Reset; Reset All; Eco Saving Plus
29 Setup and Reset A detailed description of each function is provided. Refer to your product for details.The functions available may vary depending on the product model. Refer to the actual product. Chapter 07 Reset All Return all the settings for the product to the default factory settings. Reset ...
Page 30 - Off Timer; Key Repeat Time
30 Off Timer Off Timer : Turn on Off Timer mode. Turn Off After : The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours. ― This option is only available when Off Timer is set to On . ― For products for the market in som...
Page 32 - Installing the Software; Restrictions and Problems with the Installation; System Requirements
32 Installing the Software Chapter 08 Easy Setting Box Easy Setting Box enables users to use the monitor by partitioning multiple sections. To install the latest version of Easy Setting Box , download it from the Samsung Electronics website at http://www.samsung.com. ― The software may not work prop...
Page 33 - Troubleshooting Guide; Requirements Before Contacting Samsung; Checking the Resolution and Frequency; Screen issue
33 Troubleshooting Guide Chapter 09 Requirements Before Contacting Samsung Customer Service Center ― Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Testing the Product Check if your product is operating ...
Page 34 - Source device issue
34 Not Optimum Mode is displayed. This message appears when the signal from the graphics card exceeds the maximum resolution or frequency for the product.Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table ( P.37 ). The images on the s...
Page 36 - Specifications; General
36 Specifications Chapter 10 General Model Name S27E330H S27E332H Size 27 Class (27 Inches / 68 cm) Display area 597.6 mm (H) x 336.15 mm (V)23.5 Inches (H) x 13.2 Inches (V) Pixel Pitch 0.3114 mm (H) x 0.3114 mm (V)0.01226 Inches (H) x 0.01226 Inches (V) Maximum Pixel Clock 148.5 MHz 148.5 MHz (D-S...
Page 42 - Appendix; Responsibility for the Pay Service; Not a product defect; Others
42 Appendix Chapter 11 Responsibility for the Pay Service (Cost to Customers) ― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installati...
