Samsung S27E330H - User Manual

5 Cleaning ― Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ― Take the following steps when cleaning. 1 Power off the product and computer. 2 Disconnect the power cord from the product. ― Hold the power cable by the plug and do not touch the cable with w...

6 Warning • DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. • Do not install the product in poorly ventilated spaces such as a bookcase or closet. • Install the product at least 10 cm away from the wall to allow ventilation. ...

7 Warning • There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ‒ Contact Samsung Customer Service Center for repairs. • To move the product, first disconnect all the cables from it, including the power cable. • If the product generates abnormal soun...

9 Parts Control Panel ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. ― To activate the button on the product, press the / / / / etching position exactly. Press the other position may cause wrong action. Move to RI...

10 Brightness Auto Adjustment Features Eye Saver Mode Off • Press / button : Adjust Brightness , Contrast , Sharpness . • Press / button : Adjust the screen settings automatically. ― Changing the resolution in Display Properties will activate the Auto Adjustment function. ― This function is only ava...

11 Function Key Guide ― To enter the main menu or to use other items, press the button to display the Function Key Guide. You can exit by pressing the button again. Return Press / / / button: Move to the item you want. The description for each item will appear when the focus changes. Press button: T...

12 When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below. DOME Type JOG Button Power saving/Non-signal mode Source Change PRESS button for 2 seconds Power Off When the monitor displays the Main menu the JOG Bu...

13 Reverse Side ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Description Connects to a source device using an HDMI cable or HDMI-DVI cable. Connect to a PC using the D-SUB cable. Connects to the AC/DC adapt...

15 • Notes ‒ Using a screw longer than the standard length can damage the internal components of the product. ‒ The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications. ‒ Do not use screws that do not comply with the VESA s...

16 Installation Attaching the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ― The exterior may differ depending on the product. 1 2 3 4 Insert the stand neck into the stand base in the direction shown in the figure....

17 1 Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards. 2 While holding the stand neck with one hand, pound the other fisted hand down onto the top of the stand base in the direction of the arrow to deta...

18 Connecting and Using a Source Device Chapter 03 Pre-connection Checkpoints ― Before connecting a source device, read the user manual provided with it.The number and locations of ports on source devices may differ from device to device. ― Do not connect the power cable before connecting all other ...

19 Connection Using the HDMI Cable HDMI IN Connection Using an HDMI-DVI Cable HDMI IN Connecting the Power Power connection using integrated AC/DC adapter 1 2 3 1 Connect the AC/DC adapter to the DC 14V port on the back of the monitor. 2 Next, connect the power cable to the power outlet. 3 Press the...

20 Power connection using detachable AC/DC adapter 1 2 3 1 Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 14V port on the back of the product. 2 Next, connect the power cable to the power outlet. 3 Press the button on the back of the monitor to turn it on. ― ...

22 Screen Setup Configure the screen settings such as brightness.A detailed description of each function is provided. Refer to your product for details.The functions available may vary depending on the product model. Refer to the actual product. Chapter 04 Brightness You can adjust the general brigh...

23 Eye Saver Mode Set to an optimum picture quality suitable for eye relaxation.TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for lower blue light levels. When Eye Saver Mode is ' On ', the blue light that wavelength is around 400nm will decrease, and...

24 SAMSUNG MAGIC Angle SAMSUNG M A G I C Angle allows you to configure the settings to obtain the optimum picture quality according to your viewing angle. ― This menu is not available when SAMSUNG M A G I C Bright is set to Cinema or Dynamic Contrast mode. ― This menu is not available when Game Mode...

25 HDMI Black Level If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/color degradation, black level, etc.) may occur, depending on the connected source device. In such case, HDMI Black Level can be used to adjust the image quality. If this is t...

26 Configuring Tint A detailed description of each function is provided. Refer to your product for details.Adjust the tint of the screen. This menu is not available when S A M S U N G M A G I C Bright is in Cinema or Dynamic Contrast mode. This menu is not available when Game Mode or Eye Saver Mode ...

27 Color Tone Adjust the general color tone of the picture. • Cool 2 : Set the color temperature to be cooler than Cool 1 . • Cool 1 : Set the color temperature to be cooler than Normal mode. • Normal : Display the standard color tone. • Warm 1 : Set the color temperature to be warmer than Normal mo...

28 Resizing or Relocating the Screen A detailed description of each function is provided. Refer to your product for details.The functions available may vary depending on the product model. Refer to the actual product. Chapter 06 Language Set the menu language. ― A change to the language setting will...

29 Setup and Reset A detailed description of each function is provided. Refer to your product for details.The functions available may vary depending on the product model. Refer to the actual product. Chapter 07 Reset All Return all the settings for the product to the default factory settings. Reset ...

30 Off Timer Off Timer : Turn on Off Timer mode. Turn Off After : The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours. ― This option is only available when Off Timer is set to On . ― For products for the market in som...

32 Installing the Software Chapter 08 Easy Setting Box Easy Setting Box enables users to use the monitor by partitioning multiple sections. To install the latest version of Easy Setting Box , download it from the Samsung Electronics website at http://www.samsung.com. ― The software may not work prop...

33 Troubleshooting Guide Chapter 09 Requirements Before Contacting Samsung Customer Service Center ― Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Testing the Product Check if your product is operating ...

34 Not Optimum Mode is displayed. This message appears when the signal from the graphics card exceeds the maximum resolution or frequency for the product.Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table ( P.37 ). The images on the s...

36 Specifications Chapter 10 General Model Name S27E330H Size 27 Class (27 Inches / 68 cm) Display area 597.6 mm (H) x 336.15 mm (V)23.5 Inches (H) x 13.2 Inches (V) Pixel Pitch 0.3114 mm (H) x 0.3114 mm (V)0.01226 Inches (H) x 0.01226 Inches (V) Maximum Pixel Clock 148.5 MHz (Analog, HDMI) Power Su...

39 Appendix Chapter 11 Responsibility for the Pay Service (Cost to Customers) ― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installati...