Page 2 - Instructions; Set up the camera driver
ƅ Use this camera in the following order. Before connecting the camera to a PC, viathe USB cable, you will need to set up thecamera driver. Install the camera driverthat is contained in Application softwareCD-ROM. (p.69) Take a picture. (p.19) Insert the supplied USB cable into thePC’s USB port and ...
Page 4 - READY
Ś 3 ś Caution Contents CAUTION indicates a potentially hazardous situation which, if not avoided, mayresult in a minor or moderate injury. ƅ Leaking, overheating, or damaged battery could result in fire or injury. ҟ Use battery with the correct specification for the camera. ҟ Do not short circuit, h...
Page 5 - Contents; SOFTWARE
Ś 4 ś Contents ƅ Shutter button ŊŊŊŊŊŊŊŊ 23 ƅ ZOOM W / T button ŊŊŊŊŊŊ 24 ƀ Using the LCD monitor to set the camera ŊŊŊŊŊŊŊŊŊŊŊ 25 ƅ Color tone ŊŊŊŊŊŊŊŊŊŊ 26 ƅ Brightness ŊŊŊŊŊŊŊŊŊŊ 27 ƅ Selecting focus type ŊŊŊŊŊ 27 ƅ Flash ŊŊŊŊŊŊŊŊŊŊŊŊ 28 ƅ Size ŊŊŊŊŊŊŊŊŊŊŊŊ 29 ƅ Continuous shot ŊŊŊŊŊŊŊ 30 ƅ Meter...
Page 6 - System chart
Ś 5 ś System chart Please check that you have the correct contents before using this product. The contents can vary depending on thesales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Software CD (see p.68) Camera strap User manual, Product war...
Page 7 - Identification of features
Ś 6 ś Identification of features Front & Top V A R IO P L A N Z O O M 6 . 3 - 4 4 . 7 m m 7.2 MEGA PIXELS Mode dial Self-timer lamp Remote control sensor Auto focuslamp Shutter button Built-in flash Lens/ Lens cover Power button ż Instructions for the Built-in flash- The flash opens automaticall...
Page 12 - Connecting to a Power Source; INFORMATION
a Connecting to a Power Source ƅ Number of images and battery life : Using the SLB-0837 Battery life Number of images Recording time Approx. 75 MIN Approx. 150 Approx. 80 MIN Using the fully charged battery, Auto mode, 7M image size, Fine image quality, Shot to shot interval: 30Sec.Changing the zoom...
Page 13 - CAUTION
a Connecting to a Power Source ƅ Charging LED of the AC Adapter Charging LED Being Charged Red LED is on Charging is complete Green LED is on Charging error Red LED is off or blinking ƀ Before inserting any cables or AC adapter, check the directions and do notinsert by force. It may cause damage to ...
Page 15 - Instructions on using the memory card
ƅ The camera can use SD Memory Cards and MMC (Multi Media Cards). When using MMC cards, please consult the instructions supplied with the cards. The SD memory card has a write protectswitch that prevents image files from beingdeleted or formatted. By sliding the switchtowards the bottom of the SD me...
Page 16 - When Using the Camera for the First Time : Attaching the lens cap
Ś 15 ś When Using the Camera for the First Time : Attaching the lens cap ƅ When you don œ t use the camera, attach the lens cap. ƀ You can attach the lens cap as shown below. V A R I O P L A N Z O O M 6 .3 -4 4 .1 m m 7.2 MEGA PIXELS 7.2MEGA PIXELS V A R I O P L A N Z O O M 6 .3 -4 4 .1 m m
Page 17 - When Using the Camera for the First Time : Smart button
ƅ Extending the menus : Press the extension menu button and more available menus will display. When Using the Camera for the First Time : Smart button ƅ This button is used for shifting the menu cursor to select or for confirming theselected menu. ƅ To select a sub menu, in some menus, touch the but...
Page 19 - LCD monitor indicator; MF; AEL; ڥ ڤ ڣ
No. Description Icons Page 4 Card inserted indicator p.13 5 Battery p.13 7 Focus mode p.27 8 Flash p.28~29 9 Image size p.29 10 Shooting mode p.30 11 Metering p.30 12 ISO p.31 13 Sharpness p.31 14 Special Effect p.32 15 Image quality / Frame rate p.32 16 Self-timer p.33 17 Voice Recording / Voice me...
Page 20 - Starting the recording mode; ASM
ƅ How to use the ASM mode ( ) ƀ How to select the A, S or M mode 1. Select the ASM mode by rotating the mode dial.2. Select the A, S or M mode by using the smart button. ƅ How to use the PROGRAM mode ( ) Selecting the program mode will configure thecamera with optimal settings. You can still manuall...
Page 23 - II
Things to Watch Out for When Taking Pictures Starting the recording mode Ś 22 ś ƅ Pausing while recording a movie clip (Successive Recording)This camera allows you to temporarily stop during unwanted scenes, whilerecording a movie clip. Using this function, you can record your favouritescenes into a...
Page 26 - Using the LCD monitor to set the camera
ƅ You can use the menu on the LCD monitor to set up recording functions. (O : Selectable, X : Not selectable, - : Partly selectable) Using the LCD monitor to set the camera MENU page COLOR O X X X X X X p.26 BRIGHT O X X X X X X p.27 NORMAL O O O O O X O AUTO MACRO O X X O X X X MACRO X O O X O X O ...
Page 27 - Colour tone
Colour tone ƅ You can add colour tone on the captured image.Warm menu will increase red colour of the image.Cool menu will increase blue colour of the image. ƀ Selecting the colour toneTo select the colour tone, touch the button and slide your finger to the left orright. [Emphasizing the Cool-colour...
Page 29 - Selecting focus type; Flash
Ś 28 ś Selecting focus type ƀ When the macro mode is selected, it is possible that camera shake willoccur. Take care not to shake the camera while taking a picture. ƀ When you take a picture within 20cm in the Macro mode, select the FLASHOFF mode. INFORMATION ƅ Manual Focus (MF)Where the automatic f...
Page 31 - Metering; Continuous shot
Ś 30 ś Metering ƅ If you cannot obtain suitable exposure conditions, you can change the meteringmethod to take brighter pictures. - MULTI : Exposure will be calculated based on an average of the available light in theimage area. However, the calculationwill be biased towards the centre of theimage a...
Page 32 - ISO
Ś 31 ś ƅ You can adjust the sharpness of the picture youwant to take. You cannot check the sharpness effecton the LCD monitor before you take a picture,because this function is applied only when thecaptured image is stored on the memory. Sub menu Icon Description The edges of the image are softened....
Page 33 - Effect
Ś 32 ś ƀ This file format complies with the DCF (Design rule for Camera File system). ƀ JPEG (Joint Photographic Experts Group) : JPEG is the imagecompression standard developed by the Joint Photographic Experts Group.This type of compression is most commonly used for compressing photosand graphics ...
Page 35 - White balance; Voice recording / Voice memo
Ś 34 ś White balance AUTO : The camera automatically selectsthe appropriate whitebalance settings,depending on theprevailing lightingconditions. DAYLIGHT : For taking images outside. CLOUDY : For taking images under a cloudy and overcast sky. Fluorescent H : For shooting under daylight fluorescent t...
Page 39 - Special Effect : Composite shooting
Ś 38 ś Special Effect : Composite shooting ż Selecting 2 composite shooting ƅ You can combine 2, 3, or 4 different shots in a still image - : Cancels the composite shooting - : 2 different shots are combined in a still image. - : 3 different shots are combined in a still image. - : 4 different shots...
Page 40 - Shutter Speed; Aperture Value
Ś 39 ś ƅ This mode will set the shutter speed for automaticexposure. High Shutter speeds can capture a movingobject in a still image as if the object is not moving.Low Shutter speeds can capture a moving object withan ‘active’ effect. Shutter Speed ƀ Setting up the shutter speedTo select the shutter...
Page 41 - Photo Gallery mode
Ś 40 ś 100-0001 Edit: Photo Gallery mode ƅ When the images play back, you can add play back effect and listen to a B.G.M.Only still images can be played back. Movie, Voice files are not played back. ƅ Selecting a play back mode 1. Select the Photo Gallery mode by rotating the mode dial. 2. Press the...
Page 44 - Starting play mode
Ś 43 ś 100-0001 -LQ\" -LQ\" Starting play mode ƅ Turn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. ƅ You can set up the PLAY mode function by using the camera buttons and LCDmonitor. ƅ If the memory car...
Page 48 - Starting the slide show
Ś 47 ś Starting the slide show ƅ Images can be displayed continuously at pre-set intervals.You can view the slide show by connecting the camera to an external monitor.To start the slide show, press the Start menu button. Movie file, Voice file and GIF file won't be displayed. ƀ Configure slide show ...
Page 49 - Protecting images; Deleting images; DPOF
Protecting images ƅ This is used to protect (Lock) specific shots from being accidentally erased. It also unprotects (Unlocks) images that have been previously protected. ONE : Protect / release displayed image. ALL : Protect / release all saved images - If you protect an image, the protect icon wil...
Page 51 - Rotating an image; Resize
Ś 50 ś 100-0001 2688x2016 1920x1440 1024x768 START IMAGE Size 3072X2304 2688X2016 1920X1440 1024X768 START IMAGE 7M X O O O O 5M X X O O O 3M X X X O O 1M X X X X O [Right 90°] [Left 90°] [180°] [Before rotating the image] 100-0001 RIGHT 90 Ū LEFT 90 Ū 180 Ū Rotating an image ƅ You can rotate the st...
Page 52 - Trimming
Ś 51 ś 100-0001 ISO:100Av:F4.1Tv:1/10FLASH:OFF 3072X23042006.07.01 100-0001 100-0001 Select: -LQ\" 100-0001 X1.38 Trimming: Cancel:BACK RED BLUE SEPIA B & W Trimming ƅ You can extract part of the image that you want and save it separately. 1. Select an image that you want to enlarge and pres...
Page 53 - PictBridge
Ś 52 ś 100-0001 100-0001 Print? Yes No [Using the USB cable with Cradle] [Using the USB cable with Camera] VA R IO P L A N Z O O M 6. 3- 4 4 .1 m m 7.2 MEGA PIXELS 7.2 MEGA PIXELS V A R I O P L A N Z O O M 6. 3- 4 4 .1 m m 7.2 M EG A PIX ELS PictBridge ƅ You can use the USB cable to connect this cam...
Page 54 - ڢ ڣ
Ś 53 ś ż Some menu options are not supported on all printers. If not supported, the menus are still displayed in the LCD, but are notselectable. ż If the setting values are not changed in the automatic / manual setting, thesetting values are automatically kept. PictBridge 100-0001 001 / 001 Cancel:B...
Page 55 - Printer button
Ś 54 ś 100-0001 PictBridge Printer: Ș Ș Ș Ș Connecting Computer ƅ Reset : Initialises user-changed configurations. 1. In custom printing mode, press the Reset menu button. 2. All settings will be reset. Printer button ƅ If you select [Computer] sub menu in the [USB]setup menu, [Connecting Computer] ...
Page 56 - Setup menu
Ś 55 ś 9 00:00 AM 2006.07.01 7 AEL Setup menu Menu tab Main menu Sub menu Secondary menu Page Off LOGO User image - Off Low Medium High Off Sound1 Sound2 Sound3 Off Sound1 Sound2 Sound3 Off Sound1 Sound2 Sound3 Format No Yes p.59 Copy to Card No Yes p.60 Video Out NTSC PAL p.60 USB Computer Printer ...
Page 63 - Important notes
ƅ Extremes in temperature may cause problems.- If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this seems likely,wait for at least 1 hour until all moisture is dispersed before attempting to usethe camera. Moist...
Page 66 - Before contacting a service centre
Ś 65 ś Before contacting a service centre Colour of image is different to the original scene Ϗ White balance or effect setting is incorrect Ɗ Select appropriate White balance and effect Images are too bright Ϗ Exposure is excessive Ɗ Reset exposure compensation No image on external monitor Ϗ The ext...
Page 67 - Specifications
Ś 66 ś Specifications ƅ Exposure- Control : Program AE, Shutter Priority AE, Aperture Priority AE or Manual Exposure Metering : Multi, Spot, Center - Compensation : ±2EV (1/3EV steps)- ISO Equivalent : Auto, 100, 200, 400, 800, 1000 ƅ Flash- Modes : Auto, Auto & Red-eye reduction, Fill-in flash,...
Page 69 - to be played back on a PC.; Software Notes
Ś 68 ś After inserting the CD-ROM provided with this camera into the CD-ROM drive, thefollowing window should automatically run. Before connecting the camera to the PC, youshould first install the camera driver. ż Screen Captures illustrated on this manual isbased on English Edition of Windows. ƅ Ca...
Page 70 - Setting up the application software; About the software
Ś 69 ś Setting up the application software ƅ To use this camera with a PC, install the application software first.After this has been done, the stored images in the camera can be moved to thePC and can be edited by an image editing program. ƅ You can visit the Samsung web-site through the internet. ...
Page 72 - Starting PC mode
Ś 71 ś ҟ If you connect the USB cable to a USB port on your PC and then turn on thepower, the camera will automatically switch to "computer connection mode". ҟ In this mode, you can download stored images to your PC through the USBcable. ҟ The LCD monitor is always turned off in PC mode. ƅ C...
Page 75 - Removing the USB Driver for Windows 98SE; Setting up the USB Driver for MAC; Removing the removable disk
Ś 74 ś Removing the USB Driver for Windows 98SE ƅ To remove the USB driver, refer to the process shown below. 1. Connect the camera to your PC and turn them on.2. Check whether the Removable Disk is on the [My Computer].3. Remove the [Samsung Digital Camera] on the Device manager. 4. Disconnect the ...
Page 76 - Digimax Master
Ś 75 ś 4. Select a destination and make a folder to save downloaded images and folders. - Folder names can be made in order of date and images will be downloaded. - Folder name will be made as you want and images will be downloaded. - After selecting a folder that was made before, images will be dow...
Page 79 - FAQ
Ś 78 ś FAQ ƀ When a codec for playing back the movie clip isn't installed, or isn't compatible Ɗ Install the codec as listed below. [ Installing codec for Windows ]1) Insert the CD provided with the camera.2) Run the Windows Explorer and select [CD-ROM drive:\XviD] folder and click the XviD-1.1.0-30...
Page 81 - Declaration of Conformity
MEMO Ś 80 ś FCC notice ƅ ƅ NOTE : This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation.This equipment g...